BBBlue, nmcli, and Booting with WiFi

Hello,

I saw a couple posts about network manager and no use of connmanctl in the newer images of Bullseye.

Anyway…

I do not have the network manager command tool nor does beaglecfg allow for updating the connection.

beaglecfg is showing no resources for the connection.

Seth

P.S. If this is a my side thing, okay. If not, please try to reply.

Hello Again,

Does this look right?


debian@Me:~$ sudo version-cfg
sudo: unable to resolve host Me: Temporary failure in name resolution
sudo: version-cfg: command not found
debian@Me:~$ sudo beagle-version
sudo: unable to resolve host Me: Temporary failure in name resolution
eeprom:[A335BNLTBLA21717EL000502]
model:[TI_AM335x_BeagleBone_Blue]
dogtag:[BeagleBoard.org Debian Bullseye IoT Image 2021-10-10]
bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot SPL 2021.10-rc3-g9e7b9ed3 (Sep 23 2021 - 13:35:48 +0000)]:[location: dd MBR]
UBOOT: Booted Device-Tree:[am335x-boneblue.dts]
UBOOT: Loaded Overlay:[BB-ADC-00A0.kernel]
kernel:[5.10.65-ti-r24]
/boot/uEnv.txt Settings:
uboot_overlay_options:[enable_uboot_overlays=1]
uboot_overlay_options:[enable_uboot_cape_universal=1]
pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>]
pkg:[bb-cape-overlays]:[4.14.20210821.0-0~bullseye+20210821]
WARNING:pkg:[bb-customizations]:[NOT_INSTALLED]
pkg:[bb-usb-gadgets]:[1.20211008.4-0~bullseye+20211008]
pkg:[bb-wl18xx-firmware]:[1.20210922.2-0~bullseye+20211007]
pkg:[kmod]:[28-1]
WARNING:pkg:[librobotcontrol]:[NOT_INSTALLED]
pkg:[firmware-ti-connectivity]:[20210315-3]
groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal input bluetooth netdev admin tisdk weston-launch cloud9ide gpio]
cmdline:[console=ttyS0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet]
dmesg | grep remote
[   20.590920] remoteproc remoteproc0: wkup_m3 is available
[   21.083391] remoteproc remoteproc0: powering up wkup_m3
[   21.083430] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148
[   21.083750] remoteproc remoteproc0: remote processor wkup_m3 is now up
[   25.489395] Bluetooth: hci0: change remote baud rate command in firmware
[   27.491425] remoteproc remoteproc1: 4a334000.pru is available
[   27.506254] remoteproc remoteproc2: 4a338000.pru is available
[   42.137795] Bluetooth: hci0: change remote baud rate command in firmware
dmesg | grep pru
[   27.491425] remoteproc remoteproc1: 4a334000.pru is available
[   27.506254] remoteproc remoteproc2: 4a338000.pru is available
dmesg | grep pinctrl-single
[    3.810877] pinctrl-single 44e10800.pinmux: 142 pins, size 568
dmesg | grep gpio-of-helper
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
END

Seth

P.S. This is another version I tried to answer the question of no networking: https://vitux.com/network-configuration-in-debian/ .

that’s isn’t finished…

1 Like