[beagleboard] Issue with Android ICS proting on Beagle board xM

works great for me

— On Mon, 12/17/12, rajesh kumar boddupally rajeshb.ec05@gmail.com wrote:


> From: rajesh kumar boddupally rajeshb.ec05@gmail.com
> Subject: [beagleboard] Issue with Android ICS proting on Beagle board xM
> To: beagleboard@googlegroups.com
> Date: Monday, December 17, 2012, 11:20 PM
>
> Hi All,
>
> I am using TI-Android-ICS-4.0.3 source for my android porting on to Beagl board.
>
> Link : http://processors.wiki.ti.com/index.php/TI-Android-ICS-4.0.3-DevKit-3.0.0_DevelopersGuide
>
> I am facing below issue after Androif FS mounted from mmc card.
>
> Issue Log:
>
> ap_vout omap_vout: Buffer Size = 3686400
> omap_vout omap_vout: : registered and initialized video device 16
> Waiting 1sec before mounting root device…
> mmc0: host does not support reading read-only switch. assuming write-enable.
> mmc0: new high speed SDHC card at address e624
> mmcblk0: mmc0:e624 SU04G 3.69 GiB
> mmcblk0: p1 p2 p3
> usb 1-2.1: new high speed USB device using ehci-omap and address 3
> usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00
> usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> smsc95xx v1.0.4
> smsc95xx 1-2.1:1.0: usb0: register ‘smsc95xx’ at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 2a:45:95:7d:06:c9
> EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
> VFS: Mounted root (ext4 filesystem) on device 179:2.
> Freeing init memory: 216K
> init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
> init: cannot open ‘/initlogo.rle’
> init: cannot find ‘/system/etc/install-recovery.sh’, disabling ‘flash_recovery’
> enabling adb
> adb_open
> root@android:/ # init: untracked pid 1007 exited
>
> Can you please help me to resolve this issue.
>
> Thanks in Advance,
>
> Regards,
> Rajesh.
>
> –
> For more options, visit http://beagleboard.org/discuss

|