I was trying to configure drivers for tenda W311MI wifi dongle with beaglebone black but it was a failure can anyone suggest me good tutorial on it
That's a new one, please run:
sudo /opt/scripts/tools/version.sh
and
lsusb
Regards,
There are a few older references of using this dongle on a BeagleBone. These are a bit dated though:
https://larrylisky.com/2014/02/07/product-review-tenda-w311mi-usb-wireless-adaptor/
https://fleshandmachines.wordpress.com/2013/02/24/beaglebone-debian-squeezy-with-tenda-w311mi/
Cheers,
Jon
debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh
[sudo] password for debian:
git:/opt/scripts/:[20c080bc91f243ef852a704758788a31083b0f9e]
eeprom:[A335BNLT00C05018BBBK1935]
model:[TI_AM335x_BeagleBone_Black]
dogtag:[BeagleBoard.org Debian Buster IoT Image 2020-04-06]
bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2019.04-00002-g07d5700 e21]:[location: dd MBR]
bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2019.04-00002-g07d5700e21]:[l ocation: dd MBR]
UBOOT: Booted Device-Tree:[am335x-boneblack-uboot-univ.dts]
UBOOT: Loaded Overlay:[AM335X-PRU-RPROC-4-19-TI-00A0]
UBOOT: Loaded Overlay:[BB-ADC-00A0]
UBOOT: Loaded Overlay:[BB-BONE-eMMC1-01-00A0]
UBOOT: Loaded Overlay:[BB-HDMI-TDA998x-00A0]
kernel:[4.19.94-ti-r42]
nodejs:[v10.15.2]
/boot/uEnv.txt Settings:
uboot_overlay_options:[enable_uboot_overlays=1]
uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-19-TI- 00A0.dtbo]
uboot_overlay_options:[enable_uboot_cape_universal=1]
pkg check: to individually upgrade run: [sudo apt install --only-upgrade ]
pkg:[bb-cape-overlays]:[4.14.20200403.0-0rcnee0~buster+20200403]
pkg:[bb-customizations]:[1.20200306.0-0rcnee0~buster+20200306]
pkg:[bb-usb-gadgets]:[1.20200322.0-0rcnee0~buster+20200322]
pkg:[bb-wl18xx-firmware]:[1.20200322.0-0rcnee0~buster+20200322]
pkg:[kmod]:[26-1]
pkg:[librobotcontrol]:[1.0.4-git20190227.1-0rcnee0~buster+20190327]
pkg:[firmware-ti-connectivity]:[20190717-2rcnee1~buster+20200305]
groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev us ers systemd-journal bluetooth netdev i2c gpio pwm eqep remoteproc admin spi iio docker tisdk weston-launch xenomai cloud9ide]
cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/m mcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet]
dmesg | grep remote
[ 59.195209] remoteproc remoteproc0: wkup_m3 is available
[ 59.263793] remoteproc remoteproc0: powering up wkup_m3
[ 59.263826] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168
[ 59.264144] remoteproc remoteproc0: remote processor wkup_m3 is now up
[ 63.162022] remoteproc remoteproc1: 4a334000.pru is available
[ 63.202649] remoteproc remoteproc2: 4a338000.pru is available
dmesg | grep pru
[ 63.162022] remoteproc remoteproc1: 4a334000.pru is available
[ 63.162185] pru-rproc 4a334000.pru: PRU rproc node pru@4a334000 probed succes sfully
[ 63.202649] remoteproc remoteproc2: 4a338000.pru is available
[ 63.202824] pru-rproc 4a338000.pru: PRU rproc node pru@4a338000 probed succes sfully
dmesg | grep pinctrl-single
dmesg | grep gpio-of-helper
lsusb
Bus 001 Device 036: ID 0bda:1a2b Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
END
debian@beaglebone:~$ lsusb
Bus 001 Device 037: ID 0bda:1a2b Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
debian@beaglebone:~$
I tired this forum but the link they have given is down
debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh
[sudo] password for debian:
git:/opt/scripts/:[20c080bc91f243ef852a704758788a31083b0f9e]
eeprom:[A335BNLT00C05018BBBK1935]
model:[TI_AM335x_BeagleBone_Black]
dogtag:[BeagleBoard.org Debian Buster IoT Image 2020-04-06]
bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2019.04-00002-g07d5700 e21]:[location: dd MBR]
bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2019.04-00002-g07d5700e21]:[l ocation: dd MBR]
UBOOT: Booted Device-Tree:[am335x-boneblack-uboot-univ.dts]
UBOOT: Loaded Overlay:[AM335X-PRU-RPROC-4-19-TI-00A0]
UBOOT: Loaded Overlay:[BB-ADC-00A0]
UBOOT: Loaded Overlay:[BB-BONE-eMMC1-01-00A0]
UBOOT: Loaded Overlay:[BB-HDMI-TDA998x-00A0]
kernel:[4.19.94-ti-r42]
nodejs:[v10.15.2]
/boot/uEnv.txt Settings:
uboot_overlay_options:[enable_uboot_overlays=1]
uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-19-TI- 00A0.dtbo]
uboot_overlay_options:[enable_uboot_cape_universal=1]
pkg check: to individually upgrade run: [sudo apt install --only-upgrade ]
pkg:[bb-cape-overlays]:[4.14.20200403.0-0rcnee0~buster+20200403]
pkg:[bb-customizations]:[1.20200306.0-0rcnee0~buster+20200306]
pkg:[bb-usb-gadgets]:[1.20200322.0-0rcnee0~buster+20200322]
pkg:[bb-wl18xx-firmware]:[1.20200322.0-0rcnee0~buster+20200322]
pkg:[kmod]:[26-1]
pkg:[librobotcontrol]:[1.0.4-git20190227.1-0rcnee0~buster+20190327]
pkg:[firmware-ti-connectivity]:[20190717-2rcnee1~buster+20200305]
groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev us ers systemd-journal bluetooth netdev i2c gpio pwm eqep remoteproc admin spi iio docker tisdk weston-launch xenomai cloud9ide]
cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/m mcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet]
dmesg | grep remote
[ 59.195209] remoteproc remoteproc0: wkup_m3 is available
[ 59.263793] remoteproc remoteproc0: powering up wkup_m3
[ 59.263826] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168
[ 59.264144] remoteproc remoteproc0: remote processor wkup_m3 is now up
[ 63.162022] remoteproc remoteproc1: 4a334000.pru is available
[ 63.202649] remoteproc remoteproc2: 4a338000.pru is available
dmesg | grep pru
[ 63.162022] remoteproc remoteproc1: 4a334000.pru is available
[ 63.162185] pru-rproc 4a334000.pru: PRU rproc node pru@4a334000 probed succes sfully
[ 63.202649] remoteproc remoteproc2: 4a338000.pru is available
[ 63.202824] pru-rproc 4a338000.pru: PRU rproc node pru@4a338000 probed succes sfully
dmesg | grep pinctrl-single
dmesg | grep gpio-of-helper
lsusb
Bus 001 Device 036: ID 0bda:1a2b Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
END
debian@beaglebone:~$ lsusb
Bus 001 Device 037: ID 0bda:1a2b Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub