EDID verification on BeagleBoard-xM

Gerald,

FYI, I just tested the BeagleBoard-xM EDID I2C port in the updated u-boot (so you can add to the manufacturing test):

OMAP3 beagleboard.org # i2c dev 2
Setting bus to 2
OMAP3 beagleboard.org # i2c probe
Valid chip addresses: 37 3A 50
OMAP3 beagleboard.org # i2c md 50 0 80
0000: 00 ff ff ff ff ff ff 00 1e 6d 4a 4b fe 95 00 00 .........mJK....
0010: 04 11 01 03 ea 22 1b 78 ea 32 31 a3 57 4c 9d 25 .....".x.21.WL.%
0020: 11 50 54 a5 6a 80 31 4f 45 4f 61 4f 81 80 01 01 .PT.j.1OEOaO....
0030: 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70 ......0*..Q.*@0p
0040: 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1e ..R..........8K.
0050: 47 0b 00 0a 20 20 20 20 20 20 00 00 00 fc 00 4c G... .....L
0060: 31 39 33 33 54 52 0a 20 20 20 20 20 00 00 00 fc 1933TR. ....
0070: 00 20 0a 20 20 20 20 20 20 20 20 20 20 20 00 9e . . ..

I don't know how to read anything on the other I2C port off-hand, but it is live:

OMAP3 beagleboard.org # i2c dev 0
Setting bus to 0
OMAP3 beagleboard.org # i2c probe
Valid chip addresses: 48 49 4A 4B

http://gitorious.org/beagleboard-validation/u-boot (xm-jason-patches branch) isn't 100% aligned, because the patches are applied out of order. Before I put them on top of the 'xm' branch, I want to align them with what is in OE (which is what I'm now using to build):
http://gitorious.org/~Jadon/angstrom/jadon-openembedded (esc branch) (http://gitorious.org/angstrom/jadon-openembedded/commit/6984176d3d4e29d55cd7c2a71c94a55d1746e97e)

Currently we are ~45 patches away from the mainline, so I've got a bit of work ahead!

-Jason
http://beagleboard.org/twitter