Error report on boot...

Foolowing the instructions provided with the manual of the BB gave us a working release of linux. Nevertheless USB host was not working at all propably due to a wrong init of the voltage regulation part…

From this we have decided to try another version (Debian) through a NetInstall

All informations used came from this website: http://elinux.org/BeagleBoardDebian

Problem seems to come from the RTC…
[ 7.511566] rtc-ds1307: probe of 2-0068 failed with error -5

Safe to ignore.. the ds1307 is on the zippy1/2, no biggy..

facts:
uboot 2009.01-dirty (19/02/2009)

too old... please run:
http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot
first (it's one line above, in the requirements section:
BeagleBoardDebian - eLinux.org)

[ 0.000000] Kernel command line: console=ttyO2,115200n8 console=tty0
root=/dev/ram0 rw vram=12MB omapfb.mode=dvi:1280x720MR-16@60 fixrtc
buddy=none mpurate=auto

[ 5.792633] fbcvt: 1280x720@60: CVT Name - .921M9-R
[ 5.820983] Console: switching to colour frame buffer device 160x45
[ 5.841217] regulator_init_complete: VDAC: incomplete constraints,
leaving on

Everything looks good, on your LCD/DVI screen you should see Debian's
NetInstall Splash Screen..

Do you See anything? Is just blank/power save mode? What is LCD/DVI
monitor's Model/Serial Number?

Regards,