Help: Don't know what is going wrong to boot from MMC card.

Hi!

My beagleboard is Rev B5.
My MMC card is 64MB. It is very older one.
I following the step to use HP tools to format it as FAT32.
I don't connect it to DVI LCD panel and S-Video.
The log messages are

Texas Instruments X-Loader 1.41
Starting on with MMC
Reading boot sector

717372 Bytes Read from MMC
Starting OS Bootloader from MMC...

U-Boot 1.3.3 (Jul 10 2008 - 16:30:47)

OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
OMAP3 Beagle Board + LPDDR/NAND
DRAM: 128 MB
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Audio Tone on Speakers ... complete
OMAP3 beagleboard.org #

I don't know it boot from MMC successful or not?
To connect DVI and S-Video is necessary or not?

Hi!

My beagleboard is Rev B5.
My MMC card is 64MB. It is very older one.
I following the step to use HP tools to format it as FAT32.
I don't connect it to DVI LCD panel and S-Video.
The log messages are

Texas Instruments X-Loader 1.41
Starting on with MMC
Reading boot sector

717372 Bytes Read from MMC
Starting OS Bootloader from MMC...

U-Boot 1.3.3 (Jul 10 2008 - 16:30:47)

OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
OMAP3 Beagle Board + LPDDR/NAND
DRAM: 128 MB
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Audio Tone on Speakers ... complete
OMAP3 beagleboard.org #

I don't know it boot from MMC successful or not?

Yes, that matches http://code.google.com/p/beagleboard/wiki/BeagleBoardDiagnostics, so I believe it worked for you.

To connect DVI and S-Video is necessary or not?

If you want to see the DVI and S-Video output, then it is necessary to connect. Otherwise not.

What are you trying to do with your Beagle Board?

Hi!

My beagleboard is Rev B5.
My MMC card is 64MB. It is very older one.
I following the step to use HP tools to format it as FAT32.
I don’t connect it to DVI LCD panel and S-Video.
The log messages are

Texas Instruments X-Loader 1.41
Starting on with MMC

Starting on with MMC

Reading boot sector

717372 Bytes Read from MMC
Starting OS Bootloader from MMC…

717372 Bytes Read from MMC
Starting OS Bootloader from MMC…

U-Boot 1.3.3 (Jul 10 2008 - 16:30:47)

OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
OMAP3 Beagle Board + LPDDR/NAND
DRAM: 128 MB
NAND: 256 MiB
In: serial
Out: serial
Err: serial
Audio Tone on Speakers … complete
OMAP3 beagleboard.org #

I don’t know it boot from MMC successful or not?
To connect DVI and S-Video is necessary or not?

You can diagnose DVI/S-Video by booting linux .
http://code.google.com/p/beagleboard/wiki/BootingBeagleBoard

What are you trying to do with your Beagle Board?

* To study OMAP 3 and go into DSP programming.
* To learn more OMAP to integrate more AP for Personal Portable
Device : PIM, Media Player, Digital TV receiver, Network Browsing.

Thank you!

> Texas Instruments X-Loader 1.41
> Starting on with MMC

Starting on with MMC

> Reading boot sector

> 717372 Bytes Read from MMC
> Starting OS Bootloader from MMC...

717372 Bytes Read from MMC
Starting OS Bootloader from MMC...

> U-Boot 1.3.3 (Jul 10 2008 - 16:30:47)

> OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
> OMAP3 Beagle Board + LPDDR/NAND
> DRAM: 128 MB
> NAND: 256 MiB
> In: serial
> Out: serial
> Err: serial
> Audio Tone on Speakers ... complete
> OMAP3 beagleboard.org #

> I don't know it boot from MMC successful or not?
> To connect DVI and S-Video is necessary or not?

You can diagnose DVI/S-Video by booting linux .http://code.google.com/p/beagleboard/wiki/BootingBeagleBoard

Thank you! It is very helpful!