I have just received my BBB A5C and LCD7 A3 and cannot get the system to boot past the BB logo on the LCD screen.
The board works perfectly well when NOT connected to the LCD7 (although I cannot seem to SSH into it, but that’s another matter).
I have cut the MMC pins as recommended on the LCD cape and am not getting any eMMC errors.
The boot dialog I get is:
Uncompressing Linux… done, booting the kernel.
[ 0.193250] omap2_mbox_probe: platform not supported
[ 0.203772] tps65217-bl tps65217-bl: no platform data provided
[ 0.303806] bone-capemgr bone_capemgr.9: slot #1: No cape found
[ 0.340911] bone-capemgr bone_capemgr.9: slot #2: No cape found
[ 0.378022] bone-capemgr bone_capemgr.9: slot #3: No cape found
[ 0.403576] bone-capemgr bone_capemgr.9: slot #5: BB-BONELT-HDMI conflict P8.45 (#0:BB-BONE-LCD7-01)
[ 0.413169] bone-capemgr bone_capemgr.9: slot #5: Failed verification
[ 0.419943] bone-capemgr bone_capemgr.9: loader: failed to load slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[ 0.429943] bone-capemgr bone_capemgr.9: slot #4: BB-BONE-EMMC-2G conflict P8.20 (#0:BB-BONE-LCD7-01)
[ 0.439628] bone-capemgr bone_capemgr.9: slot #4: Failed verification
[ 0.446398] bone-capemgr bone_capemgr.9: loader: failed to load slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[ 0.456372] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8.45 (#0:BB-BONE-LCD7-01)
[ 0.466047] bone-capemgr bone_capemgr.9: slot #6: Failed verification
[ 0.472815] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[ 0.494509] omap_hsmmc mmc.4: of_parse_phandle_with_args of ‘reset’ failed
[ 0.556334] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
[ 0.568073] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
[ 0.575386] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[ 0.597758] mmc1: error -22 whilst initialising SDIO card
[ 0.739336] tilcdc 4830e000.fb: timeout waiting for framedone
This is driving me nuts, to the point where I am about to call the whole thing a joke and circular file it!!!
I anyone has any suggetions I would really appreciate them.
Cheers,
Gerry