Linux beaglebone 4.0.0-bone0 - Problem with I2C

Hi all.
After BBB boots up there is no /dev/i2c-0 nor /dev/i2c-1.
Even if I use modprobe and the do appear, I can’t see eeprom in appropriate folder.
Is it my fault or it will be fixed in bone1 version of 4.0 kernel?

root@beaglebone:~# ls /dev/i
iio:device0 initctl input/
root@beaglebone:~# modprobe i2c_dev
root@beaglebone:~# ls /dev/i2c-
i2c-0 i2c-1
root@beaglebone:~# i2cdetect -r -y 0
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: – -- – -- – -- – -- – -- – -- –
10: – -- – -- – -- – -- – -- – -- – -- – --
20: – -- – -- UU – -- – -- – -- – -- – -- –
30: – -- – -- UU – -- – -- – -- – -- – -- –
40: – -- – -- – -- – -- – -- – -- – -- – --
50: 50 – -- – -- – -- – -- – -- – -- – -- –
60: – -- – -- – -- – -- – -- – -- – -- – --
70: UU – -- – -- – -- –
root@beaglebone:~# ./beaglebone-black-g-ether-load.sh
hexdump: /sys/bus/i2c/devices/0-0050/eeprom: No such file or directory
hexdump: /sys/bus/i2c/devices/0-0050/eeprom: No such file or directory
hexdump: /sys/bus/i2c/devices/0-0050/eeprom: No such file or directory
cpsw.0: D0:39:72:40:02:0D
cpsw.1: D0:39:72:40:02:0F
Stopping very small Busybox based DHCP server: Stopped /usr/sbin/udhcpd (pid 992).
udhcpd.
Starting very small Busybox based DHCP server: Starting /usr/sbin/udhcpd…
udhcpd.
root@beaglebone:~#