New patches to u-boot-1.3.2 for beagleboard

Hi all,
Peviously we had been talking about u-boot-1.3.2 for beagleboard and
the respected members of this group were asking about the patches. But
due to revision and some bugs, we could not upload the patches early.
anyhow we could succeed to get these patches which had been tested on
beagleboard rev-2. Now we are going to put those four patches related
to diffrent directories here. please take a look on these
patches ,and give your complements.

  Thank you
sunil kumar<sunilsaini05@gmail.com>
shashi ranjan<shashiranjanmca05@gmai.com>

sunil wrote:

Hi all,
Peviously we had been talking about u-boot-1.3.2 for beagleboard and
the respected members of this group were asking about the patches. But
due to revision and some bugs, we could not upload the patches early.
anyhow we could succeed to get these patches which had been tested on
beagleboard rev-2. Now we are going to put those four patches related
to diffrent directories here. please take a look on these
patches ,and give your complements.

fyi: I tried to use recent U-Boot git with these four patches and with 500MHz MLO.

This fails with infinite [1]. U-Boot 1.1.4 with 500MHz MLO from [2] is fine and doesn't show this. Any I2C adaptions missing in these four patches?

Regards

Dirk

[1] :

Texas Instruments X-Loader 1.41
Starting on with MMC
Reading boot sector

690796 Bytes Read from MMC
Starting OS Bootloader from MMC...

U-Boot 1.3.3-rc2-00037-gfb98f94-dirty (May 4 2008 - 09:19:54)

OMAP3430-GP rev 2, CPU-OPP2 L3-133MHz
OMAP3 Beagle Board 2.0 Version + mDDR (Boot ONND)
DRAM: 128 MB
NAND: 256 MiB
In: serial
Out: serial
Err: serial
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_pin: I2C_STAT=1000
I2C read: I/O error
timed out in wait_for_bb: I2C_STAT=1000
Audio Tone on Speakerstimed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_pin: I2C_STAT=1000
I2C read: I/O error
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_pin: I2C_STAT=1000
I2C read: I/O error
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_pin: I2C_STAT=1000
I2C read: I/O error
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_pin: I2C_STAT=1000
I2C read: I/O error
...

[2] http://code.google.com/p/beagleboard/wiki/BeagleSourceCode