NHD-7.0CTP-CAPE-N connection to BBB and pinmux file not found! problem

I have attached a NHD-7.0CTP-CAPE-N to my BBB and now when attempting to use config-pin on any unused pin gives the pinmux file not found! error. When the display is removed and reboot the pins are configurable. I have the latest released debian iot image installed and the display works (visual output on boot up). I included a few of the outputs in other posts to help see any problems. The SD image was written to the BBB as well so they are the same. Any help would be appreciated.

root@beaglebone:/# dmesg |grep bone

[ 0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait uboot_detected_capes=BB-BONE-NH7C-01, coherent_pool=1M net.ifnames=0 quiet

[ 6.061420] systemd[1]: Set hostname to .

debian@beaglebone:/$ config-pin -q 924

P9_24 pinmux file not found!

Cannot read pinmux file: /sys/devices/platform/ocp/ocp*P9_24_pinmux/state

root@beaglebone:/# uname -a

Linux beaglebone 4.9.82-ti-r102 #1 SMP PREEMPT Thu Feb 22 01:16:12 UTC 2018 armv7l GNU/Linux

root@beaglebone:/# sudo /opt/scripts/tools/version.sh

git:/opt/scripts/:[e307a944e0be0610ff5296e0abe4ad31a6e70daa]

eeprom:[A335BNLT00C04016BBBK2D81]

model:[TI_AM335x_BeagleBone_Black]

dogtag:[BeagleBoard.org Debian Image 2018-03-05]

bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2018.01-00002-ge9ff418fb8]:[location: dd MBR]

bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2018.01-00002-ge9ff418fb8]:[location: dd MBR]

kernel:[4.9.82-ti-r102]

nodejs:[v6.13.0]

uboot_overlay_options:[enable_uboot_overlays=1]

uboot_overlay_options:[enable_uboot_cape_universal=1]

pkg:[bb-cape-overlays]:[4.4.20180305.0-0rcnee0~stretch+20180305]

pkg:[bb-wl18xx-firmware]:[1.20170829-0rcnee2~stretch+20180104]

pkg:[firmware-ti-connectivity]:[20170823-1rcnee0~stretch+20170830]

groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep admin spi tisdk weston-launch xenomai]

cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait uboot_detected_capes=BB-BONE-NH7C-01, coherent_pool=1M net.ifnames=0 quiet]

dmesg | grep pinctrl-single

[ 1.369219] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568

dmesg | grep gpio-of-helper

[ 1.370221] gpio-of-helper ocp:cape-universal: ready

END

BeagleBone: cape eeprom: i2c_probe: 0x54: /lib/firmware/BB-BONE-NH7C-01-A0.dtbo [0xe3f55df] (from bootup display)

-rw-r–r-- 1 root root 5514 Mar 5 06:22 BB-BONE-NH7C-01-A0.dtbo (dated file on BBB)