[PATCH] arm: bone: dts: add CD for mmc1

GoogleGroups
1

This enables the use of MMC cards even when no card was inserted at boot.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>

2

The previous patch was for 3.8, for 3.11

it would look like that:

+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+ >;
+ };
};

&ldo3_reg {
@@ -314,6 +319,10 @@
};

&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
        vmmc-supply = <&vmmcsd_fixed>;
        status = "okay";

Regards,

Alexander Holler