Just to add my 2 cents, if I use U-Boot 2009.01-00013-g52eddcd (Feb 03
2009 - 22:25:11), my USB mouse and keyboard work, and see this when I
plug the mouse in:
usb 2-1: new low speed USB device using musb_hdrc and address 2
usb 2-1: device v045e p0040 is not supported
usb 2-1: configuration #1 chosen from 1 choice
input: Microsoft Microsoft Wheel Mouse Optical® as /class/input/input2
generic-usb 0003:045E:0040.0001: input: USB HID v1.00 Mouse [Microsoft
Microsoft Wheel Mouse Optical®] on usb-musb_hdrc-1/input0
Using the latest version uboot, U-Boot 2009.06-rc2 (Jun 05 2009 -
10:19:13), the same devices aren't recognized. I got this version of
uboot from the angstrom demo site, is there a different one I should
be using?
hi,all
Does this problem related to u-boot version, not the kernel?
why we should identify u-boot version when located the usb mouse and
keyboard problem?
I doubt it's a problem something related with kernel, right?
I was only posting my u-boot version because people were saying that
upgrading to the lastest version was necessary. I was pointing out
that I have the latest version and it doesn't help. Can anyone
confirm that using the *latest* version of Angstrom Demo is working
for them with USB keyboard and mouse?
hi, Anuff
Can anyone
confirm that using the *latest* version of Angstrom Demo is working
for them with USB keyboard and mouse?
what's your kernel and board version? I think it does some matter with
the problem.
I read this:http://groups.google.com/group/beagleboard/browse_thread/thread/3dfb50b04a777363/e5d6adf882babd9a?lnk=gst&q=mouse+keyboard#e5d6adf882babd9a
and this, Beagleboard:Main Page - eLinux.org
I notice some different design of the board , maybe similar changes
had been done to the linux omap kernel.
Just considered that, Rev C board has both USB OTG and USB EHCI port
to connect input devices, the Rev B board doesn't have EHCI port. but
the newer kernel 2.6.29 recognize EHCI and OTG according to the boot
log messages.
but, why it can't recognize it's connected mouse and keyboard?
I don't know what to do now, can anyone give me some advices?
what's your kernel and board version? I think it does some matter
with
the problem.
It's a C3 board. I tried the mouse plugged into the OTG and the EHCI
ports.
I'm using these files:
uImage-2.6.29-r37-beagleboard.bin
Angstrom-Beagleboard-demo-image-glibc-ipk-2009.X-stable-20090612--
beagleboard.rootfs.tar.bz2
These are the versions being displayed on boot:
Linux version 2.6.29-omap1 (koen@dominion) (gcc version 4.3.3 (GCC) )
#1 Sat Jun 20 15:29:31 CEST 2009
U-Boot 2009.06-rc2 (Jun 05 2009 - 10:19:13)
Thanks
Ed
Op 26 jun 2009 om 04:24 heeft Ed Anuff <ed.anuff@gmail.com> het
volgende geschreven:\
I was only posting my u-boot version because people were saying that
upgrading to the lastest version was necessary. I was pointing out
that I have the latest version and it doesn't help. Can anyone
confirm that using the *latest* version of Angstrom Demo is working
for them with USB keyboard and mouse?
yes, on borg revc and revb
Having similar issues. No keyboard or mouse recognized when connected via hub to BBB Rev C with latest Debian distro.
[ 0.896365] usb usb1: usb wakeup-resume
[ 0.896410] usb usb1: usb auto-resume
[ 1.104961] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[ 1.224414] usb 1-1: default language 0x0409
[ 1.224475] usb 1-1: udev 2, busnum 1, minor = 1
[ 1.224489] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
[ 1.224500] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.224510] usb 1-1: Product: USB 2.0 Hub
[ 1.224949] usb 1-1: usb_probe_device
[ 1.224965] usb 1-1: configuration #1 chosen from 1 choice
[ 1.226210] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 1.226363] hub 1-1:1.0: usb_probe_interface
[ 1.226377] hub 1-1:1.0: usb_probe_interface - got id
[ 1.226398] hub 1-1:1.0: USB hub found
[ 1.495729] usb 1-1.4: new high-speed USB device number 3 using musb-hdrc
[ 1.589658] usb 1-1.4: default language 0x0409
[ 1.589724] usb 1-1.4: udev 3, busnum 1, minor = 2
[ 1.589739] usb 1-1.4: New USB device found, idVendor=1a40, idProduct=0101
[ 1.589750] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.589760] usb 1-1.4: Product: USB 2.0 Hub
[ 1.590173] usb 1-1.4: usb_probe_device
[ 1.590190] usb 1-1.4: configuration #1 chosen from 1 choice
[ 1.590339] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
[ 1.590471] hub 1-1.4:1.0: usb_probe_interface
[ 1.590483] hub 1-1.4:1.0: usb_probe_interface - got id
[ 1.590502] hub 1-1.4:1.0: USB hub found
[ 1.691476] usb 1-1.4: usb auto-suspend, wakeup 1
[ 1.707074] usb 1-1: usb auto-suspend, wakeup 1
[ 1.720318] usb usb1: bus auto-suspend, wakeup 1
[ 3.876474] rtusb init rt2870 —>
[ 3.876611] usbcore: registered new interface driver rt2870
[ 12.651922] usb0: MAC 1a:58:38:7f:cb:5b
[ 12.651941] usb0: HOST MAC 7c:66:9d:57:65:e8
[ 12.659967] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
[ 12.662594] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
[ 12.662629] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup
[ 12.662699] usb usb2: default language 0x0409
[ 12.662731] usb usb2: udev 1, busnum 2, minor = 128
[ 12.662743] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 12.662754] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.662763] usb usb2: Product: MUSB HDRC host driver
[ 12.662774] usb usb2: Manufacturer: Linux 3.8.13-bone50 musb-hcd
[ 12.662783] usb usb2: SerialNumber: musb-hdrc.0.auto
[ 12.664849] usb usb2: usb_probe_device
[ 12.664870] usb usb2: configuration #1 chosen from 1 choice
[ 12.664924] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 12.665063] hub 2-0:1.0: usb_probe_interface
[ 12.665075] hub 2-0:1.0: usb_probe_interface - got id
[ 12.665094] hub 2-0:1.0: USB hub found
[ 12.765349] usb usb2: bus auto-suspend, wakeup 1
[ 12.888602] CAUTION: musb: Babble Interrupt Occurred