Schematic / BoM mismatch in /static/beaglebone/latest/Docs/Hardware/

GoogleGroups
1

I was checking major components on the schematic file at

https://beagleboard.org/static/beaglebone/latest/Docs/Hardware/BONE_SCH.pdf

I noticed some differences with the Bill of Materials in BONE_BOM.xls in the same folder. In particular the schematic has a Micro 2 Gigabyte DDRAM chip and the BoM has 256 Mbyte. Is it possible these documents are not synch’d?

I will check github for same issue and report here.

2

The board uses 512MB DDR3. The previous version used 256MB.

Gerald

3

I just checked the link. This is the BeagleBone. It has 256MB which is 2 Giga Bit.

Gerald

4

Whats a few bytes between friends.

5

duh got it sorry for the “dumb” question

6

No problem!

Gerald