Hey guys.
I'm using devkit8000 beagle clone. I'm having a random problem that
came out of the blues. I really hope I didn't damage my hardware or
something but this morning when I tried to turn on my board it was
stuck on uboot.. the boot timer doesn't show up and I can't get into u-
boot prompt or anything.
When i try to boot:
Texas Instruments X-Loader 1.41
Starting OS Bootloader...
U-Boot 2009.11-00423-gb5f90cf-dirty (Mar 19 2010 - 19:16:52)
OMAP3530-GP ES3.1, CPU-OPP2 L3-165MHz
OMAP3 DevKit8000 + LPDDR/NAND
I2C: ready
DRAM: 256 MB
NAND: 256 MiB
In: serial
Out: serial
Err: serial
<hangs here>
When I tried to boot from SD using the factory MLO and u-boot I got
this:
40W
Texas Instruments X-Loader 1.41
Starting on with MMC
Reading boot sector
1084488 Bytes Read from MMC
Starting OS Bootloader from MMC...
U-Boot 1.3.3-svn (Feb 4 2010 - 15:28:15)
OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
OMAP3 DevKit8000 Board + LPDDR/NAND
DRAM: 256 MB
NAND: 256 MiB
Error: Bad compare! failed
nand_read_ecc: Failed ECC read, page 0x000004c0
Error: Bad compare! failed
nand_read_ecc: Failed ECC read, page 0x000004c0
Using default environment
In: serial
Out: serial
Err: serial
<hangs here>