UART1 problem

I was working on wireless communication between two beagleboards and
the communication module which I have has serial output.

So I want to use other available serial port on expansion headers. I
was wandering if anyone have tried doing this. Especially how to
configure the expansion bus pins to use it like a UART1 or UART2.

.

So I want to use other available serial port on expansion headers. I
was wandering if anyone have tried doing this. Especially how to
configure the expansion bus pins to use it like a UART1 or UART2.

Hi Amit,

Hereby please find some pointers - For another time, please search the
list/www before sending 3 nearly identical posts within 3½ hour on a topic
which has already been heavily discussed on the list and on the www in
general. :slight_smile:

Some references, which should hopefully be able to help you forward:
http://wh1t3s.com/2009/05/06/enabling-uart1-on-rev-c2-beagleboard/
http://www.hy-research.com/beagle_expansion.html

A couple of the earlier posts/threads on the list
[beagleboard] Re: UART1 on Rev C2 BeagleBoard ( 5/5-2009)
[beagleboard] Re: U-boot.bin UART2 expansion header (16/4-2009)
[beagleboard] Re: How do I enable UART2 (12/1-2009)

Best regards - Good luck
  Søren