Hello,
I have tried building my own version of u-boot by downloading the
source
from denx and the version as mentioned below and compiling them with
code sourcery lite(the latest version
arm-2010.09-50-arm-none-linux-gnueabi) with out success. I issue these
commands
make CROSS_COMPILE=arm-none-linux-gnueabi- mrproper
make CROSS_COMPILE=arm-none-linux-gnueabi- omap3_beagle_config
make CROSS_COMPILE=arm-none-linux-gnueabi-
No errors are encountered. A u-boot file does get created. I copy it
to
the SD card with a copy of the MLO file from the angstrom SD that came
with my BB xm(I know u-boot and MLO are required to see some action as
I
have tested this with MLO and u-boot from said SD card)
What I get is :
Texas Instruments X-Loader 1.4.4ss (Aug 19 2010 - 02:48:27)
Beagle xM Rev A
Reading boot sector
Loading U-boot.bin from mmc
then a bunch of garbage for about 5 seconds.
I tried changing the baud rate a bunch of times bet never saw anything
that made sense.
Can anyone tell me what I am doing wrong?
Thanks!
David