=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2025.02.26 23:59:43 =~=~=~=~=~=~=~=~=~=~=~=  U-Boot SPL 2018.09-00002-g0b54a51eee (Sep 10 2018 - 19:41:39 -0500) Trying to boot from MMC2 Loading Environment from EXT4... ** File not found /boot/uboot.env ** ** Unable to read "/boot/uboot.env" from mmc0:1 ** U-Boot 2018.09-00002-g0b54a51eee (Sep 10 2018 - 19:41:39 -0500), Build: jenkins-github_Bootloader-Builder-65 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... ** File not found /boot/uboot.env ** ** Unable to read "/boot/uboot.env" from mmc0:1 ** Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds board_name=[A335BNLT] ... board_rev=[00C0] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 1712 bytes read in 19 ms (87.9 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-5.10.168-ti-r71 ... 11342336 bytes read in 730 ms (14.8 MiB/s) debug: [enable_uboot_overlays=1] ... debug: [enable_uboot_cape_universal=1] ... debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ... loading /boot/dtbs/5.10.168-ti-r71/am335x-boneblack-uboot-univ.dtb ... 210757 bytes read in 35 ms (5.7 MiB/s) uboot_overlays: [fdt_buffer=0x60000] ... uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ... 1614 bytes read in 205 ms (6.8 KiB/s) uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ... 5330 bytes read in 809 ms (5.9 KiB/s) uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ... 654 bytes read in 818 ms (0 Bytes/s) loading /boot/initrd.img-5.10.168-ti-r71 ... 13138355 bytes read in 843 ms (14.9 MiB/s) debug: [console=ttyS0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait init=/usr/sbin/init-beagle-flasher] ... debug: [bootz 0x82000000 0x88080000:c879b3 88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8f378000, end 8ffff9b3 ... OK reserving fdt memory region: addr=88000000 size=95000 Loading Device Tree to 8f2e0000, end 8f377fff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.168-ti-r71 (voodoo@rpi4b4g-02) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1bullseye SMP PREEMPT Fri Sep 1 04:05:07 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 21 pages/cpu s54604 r8192 d23220 u86016 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyS0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait init=/usr/sbin/init-beagle-flasher [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 430408K/522240K available (15360K kernel code, 1446K rwdata, 4040K rodata, 1024K init, 444K bss, 42680K reserved, 49152K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts [ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 [ 0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000031] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000414] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 [ 0.002571] Console: colour dummy device 80x30 [ 0.002668] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) [ 0.048471] pid_max: default: 32768 minimum: 301 [ 0.049074] LSM: Security Framework initializing [ 0.049199] Yama: becoming mindful. [ 0.049502] AppArmor: AppArmor initialized [ 0.049523] TOMOYO Linux initialized [ 0.049715] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.049734] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051427] CPU: Testing write buffer coherency: ok [ 0.051517] CPU0: Spectre v2: using BPIALL workaround [ 0.072896] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.080491] rcu: Hierarchical SRCU implementation. [ 0.089749] EFI services will not be available. [ 0.100503] smp: Bringing up secondary CPUs ... [ 0.100527] smp: Brought up 1 node, 1 CPU [ 0.100539] SMP: Total of 1 processors activated (995.32 BogoMIPS). [ 0.100550] CPU: All CPU(s) started in SVC mode. [ 0.101499] devtmpfs: initialized [ 0.144829] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.145337] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.145385] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.149232] pinctrl core: initialized pinctrl subsystem [ 0.150406] DMI not present or invalid. [ 0.151357] NET: Registered protocol family 16 [ 0.154584] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.195453] l3-aon-clkctrl:0000:0: failed to disable [ 0.196210] audit: initializing netlink subsys (disabled) [ 0.197778] thermal_sys: Registered thermal governor 'fair_share' [ 0.197793] thermal_sys: Registered thermal governor 'bang_bang' [ 0.197811] thermal_sys: Registered thermal governor 'step_wise' [ 0.197822] thermal_sys: Registered thermal governor 'user_space' [ 0.197831] thermal_sys: Registered thermal governor 'power_allocator' [ 0.198755] cpuidle: using governor ladder [ 0.198841] audit: type=2000 audit(0.188:1): state=initialized audit_enabled=0 res=1 [ 0.198878] cpuidle: using governor menu [ 4.841291] hw-breakpoint: debug architecture 0x4 unsupported. [ 4.889488] Kprobes globally optimized [ 4.912901] raid6: skip pq benchmark and using algorithm neonx8 [ 4.912934] raid6: using neon recovery algorithm [ 4.920593] iommu: Default domain type: Translated [ 4.925411] SCSI subsystem initialized [ 4.929036] usbcore: registered new interface driver usbfs [ 4.929140] usbcore: registered new interface driver hub [ 4.929204] usbcore: registered new device driver usb [ 4.930409] mc: Linux media interface: v0.10 [ 4.930468] videodev: Linux video capture interface: v2.00 [ 4.930687] pps_core: LinuxPPS API ver. 1 registered [ 4.930702] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 4.930754] PTP clock support registered [ 4.933253] NetLabel: Initializing [ 4.933280] NetLabel: domain hash size = 128 [ 4.933289] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 4.933422] NetLabel: unlabeled traffic allowed by default [ 4.934641] clocksource: Switched to clocksource dmtimer [ 5.996739] VFS: Disk quotas dquot_6.6.0 [ 5.996894] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 5.997208] FS-Cache: Loaded [ 5.997615] CacheFiles: Loaded [ 5.998722] AppArmor: AppArmor Filesystem Enabled [ 6.012201] NET: Registered protocol family 2 [ 6.012495] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 6.014042] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 6.014355] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 6.014427] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 6.014489] TCP: Hash tables configured (established 4096 bind 4096) [ 6.015219] MPTCP token hash table entries: 512 (order: 1, 8192 bytes, linear) [ 6.015326] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 6.015362] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 6.015641] NET: Registered protocol family 1 [ 6.029133] RPC: Registered named UNIX socket transport module. [ 6.029158] RPC: Registered udp transport module. [ 6.029168] RPC: Registered tcp transport module. [ 6.029178] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.029197] NET: Registered protocol family 44 [ 6.030060] Trying to unpack rootfs image as initramfs... [ 6.755892] Freeing initrd memory: 12832K [ 6.757002] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 6.763034] Initialise system trusted keyrings [ 6.763507] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 6.771755] zbud: loaded [ 6.779865] NFS: Registering the id_resolver key type [ 6.779942] Key type id_resolver registered [ 6.779955] Key type id_legacy registered [ 6.780154] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 6.780172] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 6.780225] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 6.781343] fuse: init (API version 7.32) [ 6.869360] xor: automatically using best checksumming function neon [ 6.869395] Key type asymmetric registered [ 6.869407] Asymmetric key parser 'x509' registered [ 6.869494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 6.873881] io scheduler mq-deadline registered [ 7.617184] ti-sysc: probe of 44e31000.target-module failed with error -16 [ 7.756692] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz [ 7.813411] ti-sysc: probe of 48040000.target-module failed with error -16 [ 8.033544] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 8.159181] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 8.702503] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! [ 8.702556] edma 49000000.dma: TI EDMA DMA engine driver [ 8.733325] pinctrl-single 44e10800.pinmux: 142 pins, size 568 [ 8.734829] gpio-of-helper ocp:cape-universal: Failed to get gpio property of 'P8_03' [ 8.734855] gpio-of-helper ocp:cape-universal: Failed to create gpio entry [ 8.756430] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 8.761362] printk: console [ttyS0] disabled [ 8.761490] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 [ 9.612455] printk: console [ttyS0] enabled [ 9.618814] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 27, base_baud = 3000000) is a 8250 [ 9.629370] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 28, base_baud = 3000000) is a 8250 [ 9.640116] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 43, base_baud = 3000000) is a 8250 [ 9.650383] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 44, base_baud = 3000000) is a 8250 [ 9.660769] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 45, base_baud = 3000000) is a 8250 [ 9.674238] omap_rng 48310000.rng: Random Number Generator ver. 20 [ 9.680899] random: crng init done [ 9.798836] loop: module loaded [ 9.802357] at24 2-0054: supply vcc not found, using dummy regulator [ 9.838095] at24 2-0055: supply vcc not found, using dummy regulator [ 9.874100] at24 2-0056: supply vcc not found, using dummy regulator [ 9.910060] at24 2-0057: supply vcc not found, using dummy regulator [ 10.013148] mdio_bus 4a101000.mdio: mii_bus 4a101000.mdio couldn't get reset GPIO [ 10.021861] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 [ 10.028550] cpsw 4a100000.ethernet: ALE Table size 1024 [ 10.034031] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies) [ 10.041442] cpsw 4a100000.ethernet: Detected MACID = 64:8c:bb:fe:fb:20 [ 10.051670] usbcore: registered new interface driver smsc95xx [ 10.060251] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator [ 10.069088] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests [ 10.084348] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator [ 10.093378] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests [ 10.109013] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.115814] ehci-platform: EHCI generic platform driver [ 10.121756] ehci-omap: OMAP-EHCI Host Controller driver [ 10.141284] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 10.146971] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 [ 10.154789] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 10.163133] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.170411] usb usb1: Product: MUSB HDRC host driver [ 10.175417] usb usb1: Manufacturer: Linux 5.10.168-ti-r71 musb-hcd [ 10.181644] usb usb1: SerialNumber: musb-hdrc.1 [ 10.187209] hub 1-0:1.0: USB hub found [ 10.191145] hub 1-0:1.0: 1 port detected [ 10.210138] omap_rtc 44e3e000.rtc: registered as rtc0 [ 10.216145] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) [ 10.227135] i2c /dev entries driver [ 10.236471] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 10.244254] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 10.252801] softdog: soft_reboot_cmd= soft_active_on_boot=0 [ 10.262518] cpuidle: enable-method property 'ti,am3352' found operations [ 10.271516] sdhci: Secure Digital Host Controller Interface driver [ 10.277804] sdhci: Copyright(c) Pierre Ossman [ 10.282206] sdhci-pltfm: SDHCI platform and OF driver helper [ 10.298872] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator [ 10.306744] ledtrig-cpu: registered to indicate activity on CPUs [ 10.315971] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 10.322246] omap-aes 53500000.aes: will run requests pump with realtime priority [ 10.334074] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 10.340574] omap-sham 53100000.sham: will run requests pump with realtime priority [ 10.353238] hid: raw HID events driver (C) Jiri Kosina [ 10.358780] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA [ 10.368603] usbcore: registered new interface driver usbhid [ 10.374860] usbhid: USB HID core driver [ 10.379385] remoteproc remoteproc0: wkup_m3 is available [ 10.394898] NET: Registered protocol family 10 [ 10.435284] mmc1: new high speed MMC card at address 0001 [ 10.452548] mmcblk1: mmc1:0001 MK2704 3.53 GiB [ 10.463591] mmcblk1boot0: mmc1:0001 MK2704 partition 1 2.00 MiB [ 10.475561] mmcblk1boot1: mmc1:0001 MK2704 partition 2 2.00 MiB [ 10.485329] mmcblk1rpmb: mmc1:0001 MK2704 partition 3 512 KiB, chardev (240:0) [ 10.507448] mmcblk1: p1 [ 10.516085] Segment Routing with IPv6 [ 10.520222] mip6: Mobile IPv6 [ 10.525732] NET: Registered protocol family 17 [ 10.537045] Key type dns_resolver registered [ 10.541621] mpls_gso: MPLS GSO support [ 10.545728] ThumbEE CPU extension supported. [ 10.550489] Registering SWP/SWPB emulation handler [ 10.555359] omap_voltage_late_init: Voltage driver support not added [ 10.562755] registered taskstats version 1 [ 10.566925] Loading compiled-in X.509 certificates [ 10.571925] zswap: loaded using pool lzo/zbud [ 10.581215] Key type .fscrypt registered [ 10.585273] Key type fscrypt-provisioning registered [ 10.597461] Btrfs loaded, crc32c=crc32c-generic [ 10.602241] AppArmor: AppArmor sha1 policy hashing enabled [ 10.629055] OMAP GPIO hardware version 0.1 [ 10.663495] tps65217-pmic: Failed to locate of_node [id: -1] [ 10.680275] tps65217-bl: Failed to locate of_node [id: -1] [ 10.688997] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set [ 10.696408] input: tps65217_pwr_but as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 [ 10.715012] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 10.722088] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 10.729316] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 10.742934] gpio-of-helper ocp:cape-universal: Allocated GPIO id=0 name='P8_03' [ 10.750545] gpio-of-helper ocp:cape-universal: Allocated GPIO id=1 name='P8_04' [ 10.758092] gpio-of-helper ocp:cape-universal: Allocated GPIO id=2 name='P8_05' [ 10.765641] gpio-of-helper ocp:cape-universal: Allocated GPIO id=3 name='P8_06' [ 10.773456] gpio-of-helper ocp:cape-universal: Allocated GPIO id=4 name='P8_07' [ 10.781090] gpio-of-helper ocp:cape-universal: Allocated GPIO id=5 name='P8_08' [ 10.788656] gpio-of-helper ocp:cape-universal: Allocated GPIO id=6 name='P8_09' [ 10.796194] gpio-of-helper ocp:cape-universal: Allocated GPIO id=7 name='P8_10' [ 10.803744] gpio-of-helper ocp:cape-universal: Allocated GPIO id=8 name='P8_11' [ 10.811292] gpio-of-helper ocp:cape-universal: Allocated GPIO id=9 name='P8_12' [ 10.818929] gpio-of-helper ocp:cape-universal: Allocated GPIO id=10 name='P8_13' [ 10.826588] gpio-of-helper ocp:cape-universal: Allocated GPIO id=11 name='P8_14' [ 10.834231] gpio-of-helper ocp:cape-universal: Allocated GPIO id=12 name='P8_15' [ 10.841859] gpio-of-helper ocp:cape-universal: Allocated GPIO id=13 name='P8_16' [ 10.849490] gpio-of-helper ocp:cape-universal: Allocated GPIO id=14 name='P8_17' [ 10.857113] gpio-of-helper ocp:cape-universal: Allocated GPIO id=15 name='P8_18' [ 10.864761] gpio-of-helper ocp:cape-universal: Allocated GPIO id=16 name='P8_19' [ 10.872381] gpio-of-helper ocp:cape-universal: Allocated GPIO id=17 name='P8_20' [ 10.880011] gpio-of-helper ocp:cape-universal: Allocated GPIO id=18 name='P8_21' [ 10.887638] gpio-of-helper ocp:cape-universal: Allocated GPIO id=19 name='P8_22' [ 10.895252] gpio-of-helper ocp:cape-universal: Allocated GPIO id=20 name='P8_23' [ 10.902909] gpio-of-helper ocp:cape-universal: Allocated GPIO id=21 name='P8_24' [ 10.910537] gpio-of-helper ocp:cape-universal: Allocated GPIO id=22 name='P8_25' [ 10.918164] gpio-of-helper ocp:cape-universal: Allocated GPIO id=23 name='P8_26' [ 10.925808] gpio-of-helper ocp:cape-universal: Allocated GPIO id=24 name='P8_27' [ 10.933426] gpio-of-helper ocp:cape-universal: Allocated GPIO id=25 name='P8_28' [ 10.941050] gpio-of-helper ocp:cape-universal: Allocated GPIO id=26 name='P8_29' [ 10.948693] gpio-of-helper ocp:cape-universal: Allocated GPIO id=27 name='P8_30' [ 10.956334] gpio-of-helper ocp:cape-universal: Allocated GPIO id=28 name='P8_31' [ 10.963966] gpio-of-helper ocp:cape-universal: Allocated GPIO id=29 name='P8_32' [ 10.971585] gpio-of-helper ocp:cape-universal: Allocated GPIO id=30 name='P8_33' [ 10.979218] gpio-of-helper ocp:cape-universal: Allocated GPIO id=31 name='P8_34' [ 10.986850] gpio-of-helper ocp:cape-universal: Allocated GPIO id=32 name='P8_35' [ 10.994464] gpio-of-helper ocp:cape-universal: Allocated GPIO id=33 name='P8_36' [ 11.002091] gpio-of-helper ocp:cape-universal: Allocated GPIO id=34 name='P8_37' [ 11.009708] gpio-of-helper ocp:cape-universal: Allocated GPIO id=35 name='P8_38' [ 11.017340] gpio-of-helper ocp:cape-universal: Allocated GPIO id=36 name='P8_39' [ 11.024971] gpio-of-helper ocp:cape-universal: Allocated GPIO id=37 name='P8_40' [ 11.032609] gpio-of-helper ocp:cape-universal: Allocated GPIO id=38 name='P8_41' [ 11.040237] gpio-of-helper ocp:cape-universal: Allocated GPIO id=39 name='P8_42' [ 11.047851] gpio-of-helper ocp:cape-universal: Allocated GPIO id=40 name='P8_43' [ 11.055608] gpio-of-helper ocp:cape-universal: Allocated GPIO id=41 name='P8_44' [ 11.063253] gpio-of-helper ocp:cape-universal: Allocated GPIO id=42 name='P8_45' [ 11.070878] gpio-of-helper ocp:cape-universal: Allocated GPIO id=43 name='P8_46' [ 11.078511] gpio-of-helper ocp:cape-universal: Allocated GPIO id=44 name='P9_11' [ 11.086141] gpio-of-helper ocp:cape-universal: Allocated GPIO id=45 name='P9_12' [ 11.093792] gpio-of-helper ocp:cape-universal: Allocated GPIO id=46 name='P9_13' [ 11.101423] gpio-of-helper ocp:cape-universal: Allocated GPIO id=47 name='P9_14' [ 11.109037] gpio-of-helper ocp:cape-universal: Allocated GPIO id=48 name='P9_15' [ 11.116662] gpio-of-helper ocp:cape-universal: Allocated GPIO id=49 name='P9_16' [ 11.124289] gpio-of-helper ocp:cape-universal: Allocated GPIO id=50 name='P9_17' [ 11.131908] gpio-of-helper ocp:cape-universal: Allocated GPIO id=51 name='P9_18' [ 11.139560] gpio-of-helper ocp:cape-universal: Allocated GPIO id=52 name='P9_19' [ 11.147217] gpio-of-helper ocp:cape-universal: Allocated GPIO id=53 name='P9_20' [ 11.154858] gpio-of-helper ocp:cape-universal: Allocated GPIO id=54 name='P9_21' [ 11.162506] gpio-of-helper ocp:cape-universal: Allocated GPIO id=55 name='P9_22' [ 11.170130] gpio-of-helper ocp:cape-universal: Allocated GPIO id=56 name='P9_23' [ 11.177769] gpio-of-helper ocp:cape-universal: Allocated GPIO id=57 name='P9_24' [ 11.185689] gpio-of-helper ocp:cape-universal: Allocated GPIO id=58 name='P9_25' [ 11.193395] gpio-of-helper ocp:cape-universal: Allocated GPIO id=59 name='P9_26' [ 11.201053] gpio-of-helper ocp:cape-universal: Allocated GPIO id=60 name='P9_27' [ 11.208678] gpio-of-helper ocp:cape-universal: Allocated GPIO id=61 name='P9_28' [ 11.216318] gpio-of-helper ocp:cape-universal: Allocated GPIO id=62 name='P9_29' [ 11.223931] gpio-of-helper ocp:cape-universal: Allocated GPIO id=63 name='P9_30' [ 11.231588] gpio-of-helper ocp:cape-universal: Allocated GPIO id=64 name='P9_31' [ 11.239226] gpio-of-helper ocp:cape-universal: Allocated GPIO id=65 name='P9_41' [ 11.246858] gpio-of-helper ocp:cape-universal: Allocated GPIO id=66 name='P9_91' [ 11.254490] gpio-of-helper ocp:cape-universal: Allocated GPIO id=67 name='P9_42' [ 11.262109] gpio-of-helper ocp:cape-universal: Allocated GPIO id=68 name='P9_92' [ 11.269570] gpio-of-helper ocp:cape-universal: ready [ 11.314692] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 11.339638] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 11.358373] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) [ 11.368794] sdhci-omap 48060000.mmc: Got CD GPIO [ 11.373899] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator [ 11.411113] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA [ 11.493482] tda998x 0-0070: found TDA19988 [ 11.501922] tilcdc 4830e000.lcdc: bound 0-0070 (ops 0xc10ac0fc) [ 11.509336] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 [ 11.517262] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes [ 11.525605] of_cfs_init [ 11.528687] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes [ 11.535291] of_cfs_init: OK [ 11.542145] Freeing unused kernel memory: 1024K [ 11.547625] Run /init as init process Loading, please wait... Starting version 247.3-7+deb11u4 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/mmcblk0p1 does not exist. Dropping to a shell! BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs)