reboot root@arm:/etc/init# Broadcast message from ubuntu@arm (/dev/ttyO2) at 2:52 ... The system is going down for reboot NOW! acpid: exiting * Stopping web server apache2 * udhcpd: Disabled. Edit /etc/default/udhcpd to enable it. * Asking all remaining processes to terminate... [ OK ] * All processes ended within 1 seconds... [ OK ] * Deactivating swap... [ OK ] * Unmounting local filesystems... [ OK ] * Will now restart [ 951.985382] reboot: Restarting system U-Boot SPL 2014.01-00014-gcc58fc1 (Feb 10 2014 - 16:24:52) U-Boot 2014.01-00014-gcc58fc1 (Feb 10 2014 - 16:24:52) OMAP3530-GP ES3.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 MHz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Beagle Rev C1/C2/C3 Timed out in wait_for_event: status=0000 Check if pads/pull-ups of bus 1 are properly configured No EEPROM on expansion board Timed out in wait_for_event: status=0000 Check if pads/pull-ups of bus 1 are properly configured No EEPROM on expansion board Die ID #759e0003000000000403230910012002 Net: usb_ether Hit any key to stop autoboot: 1  0 mmc0 is current device gpio: pin 173 (gpio 173) value is 1 gpio: pin 7 (gpio 7) value is 0 SD/MMC found on device 0 reading uEnv.txt 840 bytes read in 4 ms (205.1 KiB/s) Loaded environment from uEnv.txt Importing environment from mmc ... Checking if lcdcmd is set ... Checking if uenvcmd is set ... Running uenvcmd ... reading zImage 4123432 bytes read in 306 ms (12.9 MiB/s) reading initrd.img 3055768 bytes read in 228 ms (12.8 MiB/s) reading /dtbs/omap3-beagle.dtb 17562 bytes read in 11 ms (1.5 MiB/s) ## Error: "expansion_args" not defined Kernel image @ 0x80300000 [ 0x000000 - 0x3eeb28 ] ## Flattened Device Tree blob at 815f0000 Booting using the fdt blob at 0x815f0000 Using Device Tree in place at 815f0000, end 815f7499 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.5-armv7-x11 (developer@ubuntu) (gcc version 4.8.2 20131014 (prerel ease) (crosstool-NG linaro-1.13.1-4.8-2013.10 - Linaro GCC 2013.10) ) #1 SMP Mon Feb 24 01:44:44 PST 2014 [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: TI OMAP3 BeagleBoard [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] OMAP3430/3530 ES3.0 (l2cache iva sgx neon isp ) [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0f11000 s14336 r8192 d14336 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768 [ 0.000000] Kernel command line: console=ttyO2,115200n8 omapfb.mode=dvi:1280x720MR-16@60 root=/de v/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] allocated 524288 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 241924K/261120K available (7871K kernel code, 671K rwdata, 3232K rodata, 494K init, 1017K bss, 19196K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0ae00b4 (11105 kB) [ 0.000000] .init : 0xc0ae1000 - 0xc0b5c800 ( 494 kB) [ 0.000000] .data : 0xc0b5e000 - 0xc0c05de8 ( 672 kB) [ 0.000000] .bss : 0xc0c05de8 - 0xc0d04520 (1018 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] OMAP clockevent source: timer12 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000366] Calibrating delay loop... 583.27 BogoMIPS (lpj=2916352) [ 0.048797] pid_max: default: 32768 minimum: 301 [ 0.048980] Security Framework initialized [ 0.049072] AppArmor: AppArmor initialized [ 0.049316] Mount-cache hash table entries: 512 [ 0.057891] Initializing cgroup subsys memory [ 0.057952] Initializing cgroup subsys devices [ 0.057952] Initializing cgroup subsys freezer [ 0.057983] Initializing cgroup subsys net_cls [ 0.057983] Initializing cgroup subsys blkio [ 0.058013] Initializing cgroup subsys perf_event [ 0.058166] CPU: Testing write buffer coherency: ok [ 0.058807] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.058898] Setting up static identity map for 0x807739c0 - 0x80773a18 [ 0.060882] Brought up 1 CPUs [ 0.060882] SMP: Total of 1 processors activated. [ 0.060913] CPU: All CPU(s) started in SVC mode. [ 0.061981] devtmpfs: initialized [ 0.067657] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 0.072845] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp [ 0.073028] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp [ 0.074859] ------------[ cut here ]------------ [ 0.074890] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2534 _init+0x37c/0x3c4() [ 0.074890] omap_hwmod: ssi: doesn't have mpu register target base [ 0.074920] Modules linked in: [ 0.074951] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.5-armv7-x11 #1 [ 0.075012] [] (unwind_backtrace+0x0/0xdc) from [] (show_stack+0x10/0x14) [ 0.075042] [] (show_stack+0x10/0x14) from [] (dump_stack+0x70/0x8c) [ 0.075073] [] (dump_stack+0x70/0x8c) from [] (warn_slowpath_common+0x64/0x88 ) [ 0.075103] [] (warn_slowpath_common+0x64/0x88) from [] (warn_slowpath_fmt+0x 2c/0x3c) [ 0.075134] [] (warn_slowpath_fmt+0x2c/0x3c) from [] (_init+0x37c/0x3c4) [ 0.075164] [] (_init+0x37c/0x3c4) from [] (omap_hwmod_for_each+0x38/0x60) [ 0.075195] [] (omap_hwmod_for_each+0x38/0x60) from [] (__omap_hwmod_setup_al l+0x24/0x40) [ 0.075225] [] (__omap_hwmod_setup_all+0x24/0x40) from [] (do_one_initcall+0x 94/0x130) [ 0.075256] [] (do_one_initcall+0x94/0x130) from [] (kernel_init_freeable+0x1 ac/0x274) [ 0.075286] [] (kernel_init_freeable+0x1ac/0x274) from [] (kernel_init+0x8/0x 100) [ 0.075317] [] (kernel_init+0x8/0x100) from [] (ret_from_fork+0x14/0x3c) [ 0.075378] ---[ end trace da9fdaefafb57489 ]--- [ 0.095214] omap_hwmod: mcbsp2: cannot be enabled for reset (3) [ 0.136291] xor: measuring software checksum speed [ 0.226287] arm4regs : 740.400 MB/sec [ 0.325134] 8regs : 545.600 MB/sec [ 0.423980] 32regs : 637.600 MB/sec [ 0.522827] neon : 528.800 MB/sec [ 0.522827] xor: using function: arm4regs (740.400 MB/sec) [ 0.522857] pinctrl core: initialized pinctrl subsystem [ 0.523529] regulator-dummy: no parameters [ 0.524108] NET: Registered protocol family 16 [ 0.525573] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.526672] cpuidle: using governor ladder [ 0.526702] cpuidle: using governor menu [ 0.533508] Reprogramming SDRC clock to 332000000 Hz [ 0.536224] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_ gpio1_pins, deferring probe [ 0.536254] platform 48310000.gpio: Driver omap_gpio requests probe deferral [ 0.537414] OMAP GPIO hardware version 2.5 [ 0.546539] platform 49022000.mcbsp: alias fck already exists [ 0.546997] platform 49024000.mcbsp: alias fck already exists [ 0.552185] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 [ 0.556243] No ATAGs? [ 0.556274] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.557922] OMAP DMA hardware revision 4.0 [ 0.578338] bio: create slab at 0 [ 0.740783] raid6: int32x1 61 MB/s [ 0.908020] raid6: int32x2 110 MB/s [ 1.076019] raid6: int32x4 96 MB/s [ 1.244018] raid6: int32x8 100 MB/s [ 1.411468] raid6: neonx1 258 MB/s [ 1.579284] raid6: neonx2 466 MB/s [ 1.747161] raid6: neonx4 270 MB/s [ 1.915161] raid6: neonx8 144 MB/s [ 1.915161] raid6: using algorithm neonx2 (466 MB/s) [ 1.915191] raid6: using intx1 recovery algorithm [ 1.917022] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 1.917083] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 1.935333] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver [ 1.936096] platform hsusb2_power_reg.8: Driver reg-fixed-voltage requests probe deferral [ 1.940643] SCSI subsystem initialized [ 1.941619] usbcore: registered new interface driver usbfs [ 1.941711] usbcore: registered new interface driver hub [ 1.941955] usbcore: registered new device driver usb [ 1.942382] platform hsusb2_phy.9: Driver usb_phy_gen_xceiv requests probe deferral [ 1.946441] omap_i2c 48070000.i2c: bus 0 rev3.3 at 2600 kHz [ 1.947143] omap_i2c 48072000.i2c: bus 1 rev3.3 at 400 kHz [ 1.948394] omap_i2c 48060000.i2c: bus 2 rev3.3 at 100 kHz [ 1.948730] media: Linux media interface: v0.10 [ 1.948852] Linux video capture interface: v2.00 [ 1.949005] pps_core: LinuxPPS API ver. 1 registered [ 1.949035] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.949066] PTP clock support registered [ 1.949188] EDAC MC: Ver: 3.0.0 [ 1.950256] omap-iommu omap-iommu.0: mmu_isp registered [ 1.950897] Advanced Linux Sound Architecture Driver Initialized. [ 1.952087] NetLabel: Initializing [ 1.952087] NetLabel: domain hash size = 128 [ 1.952117] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.952209] NetLabel: unlabeled traffic allowed by default [ 1.952667] Switched to clocksource 32k_counter [ 2.015472] AppArmor: AppArmor Filesystem Enabled [ 2.032867] NET: Registered protocol family 2 [ 2.033966] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 2.034027] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) [ 2.034088] TCP: Hash tables configured (established 2048 bind 2048) [ 2.034210] TCP: reno registered [ 2.034240] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 2.034271] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 2.034759] NET: Registered protocol family 1 [ 2.035400] RPC: Registered named UNIX socket transport module. [ 2.035430] RPC: Registered udp transport module. [ 2.035430] RPC: Registered tcp transport module. [ 2.035430] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.037841] Unpacking initramfs... [ 2.394256] Freeing initrd memory: 2984K (c1600000 - c18ea000) [ 2.394775] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 2.398559] audit: initializing netlink socket (disabled) [ 2.398651] type=2000 audit(2.400:1): initialized [ 2.764770] VFS: Disk quotas dquot_6.5.2 [ 2.765228] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.768737] NFS: Registering the id_resolver key type [ 2.768829] Key type id_resolver registered [ 2.768859] Key type id_legacy registered [ 2.768890] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.769317] fuse init (API version 7.22) [ 2.769989] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 2.773498] bio: create slab at 1 [ 2.774963] Btrfs loaded [ 2.775390] msgmni has been set to 478 [ 2.777526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.777740] io scheduler noop registered [ 2.777770] io scheduler deadline registered [ 2.777832] io scheduler cfq registered (default) [ 2.781768] pinctrl-single 48002030.pinmux: 742 pins at pa fa002030 size 1484 [ 2.782165] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92 [ 2.785339] OMAP DSS rev 2.0 [ 2.890228] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.892578] Serial: IMX driver [ 2.893859] omap_uart 4806a000.serial: no wakeirq for uart0 [ 2.894348] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP U ART0 [ 2.895019] omap_uart 4806c000.serial: no wakeirq for uart0 [ 2.895446] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP U ART1 [ 2.896057] omap_uart 49020000.serial: no wakeirq for uart0 [ 2.896453] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP U ART2 [ 4.002532] console [ttyO2] enabled [ 4.007141] serial: Freescale lpuart driver [ 4.012420] [drm] Initialized drm 1.1.0 20060810 [ 4.017547] usbcore: registered new interface driver udl [ 4.028991] twl 0-0048: PIH (irq 23) chaining IRQs 306..314 [ 4.035125] twl 0-0048: power (irq 311) chaining IRQs 314..321 [ 4.044433] VAUX1: at 3000 mV [ 4.049133] vdd_ehci: 1800 mV [ 4.053466] VAUX3: at 2800 mV [ 4.057739] VAUX4: at 2800 mV [ 4.061981] VDD1: 600 <--> 1450 mV at 1350 mV [ 4.067810] VDAC: 1800 mV [ 4.071899] VIO: at 1800 mV [ 4.076263] VINTANA1: 1500 mV [ 4.080596] VINTANA2: at 2750 mV [ 4.085388] VINTDIG: 1500 mV [ 4.089355] VMMC1: 1850 <--> 3150 mV at 3150 mV [ 4.095275] VMMC2: 1850 <--> 3150 mV at 2600 mV [ 4.100982] VUSB1V5: 1500 mV [ 4.104919] VUSB1V8: 1800 mV [ 4.108764] VUSB3V1: 3100 mV [ 4.113037] VPLL1: at 1800 mV [ 4.117370] VPLL2: 1800 mV [ 4.121398] VSIM: 1800 <--> 3000 mV at 1800 mV [ 4.127197] twl4030_gpio gpio.37: gpio (irq 306) chaining IRQs 322..339 [ 4.137359] twl4030_usb twl4030-usb.38: Initialized TWL4030 USB module [ 4.156127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.163085] ehci-omap: OMAP-EHCI Host Controller driver [ 4.168945] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517 [ 4.176269] platform 48064800.ehci: Driver ehci-omap requests probe deferral [ 4.183990] usbcore: registered new interface driver usb-storage [ 4.198425] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver [ 4.204925] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1 [ 4.213653] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.220794] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.228454] usb usb1: Product: MUSB HDRC host driver [ 4.233703] usb usb1: Manufacturer: Linux 3.13.5-armv7-x11 musb-hcd [ 4.240295] usb usb1: SerialNumber: musb-hdrc.0.auto [ 4.246459] hub 1-0:1.0: USB hub found [ 4.250488] hub 1-0:1.0: 1 port detected [ 4.257080] using random self ethernet address [ 4.261749] using random host ethernet address [ 4.267395] usb0: HOST MAC 42:3c:93:94:10:18 [ 4.271942] usb0: MAC b6:87:bf:4c:04:d6 [ 4.276092] using random self ethernet address [ 4.280792] using random host ethernet address [ 4.285583] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 [ 4.292541] g_ether gadget: g_ether ready [ 4.297576] mousedev: PS/2 mouse device common for all mice [ 4.305145] i2c /dev entries driver [ 4.311828] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 4.321380] sdhci: Secure Digital Host Controller Interface driver [ 4.327972] sdhci: Copyright(c) Pierre Ossman [ 4.333587] omap-dma-engine 48056000.dma-controller: allocating channel for 62 [ 4.341217] omap-dma-engine 48056000.dma-controller: allocating channel for 61 [ 4.350158] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 4.393341] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.401702] ledtrig-cpu: registered to indicate activity on CPUs [ 4.408264] hidraw: raw HID events driver (C) Jiri Kosina [ 4.416259] usbcore: registered new interface driver usbhid [ 4.422119] usbhid: USB HID core driver [ 4.429351] ashmem: initialized [ 4.434722] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.441741] [drm] No driver support for vblank timestamp query. [ 4.448059] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0 [ 4.490020] mmc0: host does not support reading read-only switch. assuming write-enable. [ 4.500671] mmc0: new high speed SDHC card at address 59b4 [ 4.507110] isa bounce pool size: 16 pages [ 4.511901] mmcblk0: mmc0:59b4 USD 14.7 GiB [ 4.518798] mmcblk0: p1 p2 [ 4.543090] omap-twl4030 sound.10: twl4030-hifi <-> 49022000.mcbsp mapping ok [ 4.556579] oprofile: using arm/armv7 [ 4.560882] TCP: cubic registered [ 4.565338] NET: Registered protocol family 10 [ 4.571563] mip6: Mobile IPv6 [ 4.574798] NET: Registered protocol family 17 [ 4.579650] Key type dns_resolver registered [ 4.584197] mpls_gso: MPLS GSO support [ 4.589508] PM: no software I/O chain control; some wakeups may be lost [ 4.597381] ThumbEE CPU extension supported. [ 4.601959] Registering SWP/SWPB emulation handler [ 4.607116] SmartReflex Class3 initialized [ 4.612518] registered taskstats version 1 [ 4.617065] AppArmor: AppArmor sha1 policy hashing enabled [ 4.623138] VPLL2: disabling [ 4.626770] VDAC: disabling [ 4.630249] VAUX3: disabling [ 4.635345] omapdrm omapdrm.0: DMM not available, disable DMM support [ 4.642791] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.649749] [drm] No driver support for vblank timestamp query. [ 4.656036] omapdrm omapdrm.0: No connectors reported connected with modes [ 4.663299] [drm] Cannot find any crtc or sizes - going 1024x768 [ 4.702209] Console: switching to colour frame buffer device 128x48 [ 4.725311] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 4.731536] omapdrm omapdrm.0: registered panic notifier [ 4.737182] [drm] Initialized omapdrm 1.0.0 20110917 on minor 1 [ 4.743621] Error: Driver 'tfp410' is already registered, aborting... [ 4.754058] hsusb2_vbus: 3300 mV [ 4.853179] ehci-omap 48064800.ehci: EHCI Host Controller [ 4.859405] ehci-omap 48064800.ehci: new USB bus registered, assigned bus number 2 [ 4.867645] ehci-omap 48064800.ehci: irq 93, io mem 0x48064800 [ 4.892761] ehci-omap 48064800.ehci: USB 2.0 started, EHCI 1.00 [ 4.899475] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.906646] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.914306] usb usb2: Product: EHCI Host Controller [ 4.919433] usb usb2: Manufacturer: Linux 3.13.5-armv7-x11 ehci_hcd [ 4.926055] usb usb2: SerialNumber: 48064800.ehci [ 4.932006] hub 2-0:1.0: USB hub found [ 4.936096] hub 2-0:1.0: 3 ports detected [ 4.941772] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 4.948486] sr_init: No PMIC hook to init smartreflex [ 4.954101] sr_init: platform driver register failed for SR [ 4.960021] imx-drm imx-drm: No connectors reported connected with modes [ 4.967132] [drm] Cannot find any crtc or sizes - going 1024x768 [ 4.980926] imx-drm imx-drm: fb1: frame buffer device [ 4.986846] ALSA device list: [ 4.990051] #0: omap3beagle [ 4.995452] Freeing unused kernel memory: 492K (c0ae1000 - c0b5c000) Loading, please wait... [ 5.136444] systemd-udevd[82]: starting version 204 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... hwclock: Cannot access the Hardware Clock via any known m ethod. hwclock: Use the --debug option to see the details of our search for an access method. done. [ 6.462188] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. [ 7.071411] random: init urandom read with 72 bits of entropy available [ 7.450012] init: ureadahead main process (134) terminated with status 5 [ 8.099029] init: mounted-proc main process (154) terminated with status 1 [ 8.869110] random: nonblocking pool is initialized [ 8.962188] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 15.308715] of_dma_request_slave_channel: dma-names property of node '/ocp/aes@480c5000' missing or empty [ 15.319030] omap-aes 480c5000.aes: Unable to request in DMA channel [ 15.325683] omap_aes_dma_init: error: -12 * Loading cpufreq kernel modules... [ OK ] * CPUFreq Utilities: Setting ondemand CPUFreq governor... * CPU0... [ OK ] udhcpd: Disabled. Edit /etc/default/udhcpd to enable it. * Starting web server apache2 * * The apache2 configtest failed. Output of config test was: env: /usr/sbin/apache2ctl: No such file or directory Ubuntu 13.10 arm ttyO2 arm login: