[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.13 (koen@rrMBP) (gcc version 4.7.3 20130205 (prerelease) (Linaro GCC 4.7-2013.02-01) ) #1 SMP Thu Sep 12 10:27:06 CEST 2013 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 130816 [ 0.000000] free_area_init_node: node 0, pgdat c06c9080, node_mem_map c0724000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 129792 pages, LIFO batch:31 [ 0.000000] AM335X ES1.0 (neon ) [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0b34000 s9408 r8192 d15168 u32768 [ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792 [ 0.000000] Kernel command line: console=ttyO0,115200n8 quiet drm.debug=7 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 511MB = 511MB total [ 0.000000] Memory: 510296k/510296k available, 13992k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf800000 - 0xbfe00000 ( 6 MB) .text : 0xc0008000 - 0xc060fc28 (6176 kB) .init : 0xc0610000 - 0xc06524c0 ( 266 kB) .data : 0xc0654000 - 0xc06c9fa0 ( 472 kB) .bss : 0xc06c9fa0 - 0xc0723d3c ( 360 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000362] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968) [ 0.015420] pid_max: default: 32768 minimum: 301 [ 0.015658] Security Framework initialized [ 0.015752] Mount-cache hash table entries: 512 [ 0.026355] Initializing cgroup subsys cpuacct [ 0.026387] Initializing cgroup subsys memory [ 0.026450] Initializing cgroup subsys blkio [ 0.026589] CPU: Testing write buffer coherency: ok [ 0.027185] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.027261] Setting up static identity map for 0x8038a5e0 - 0x8038a62c [ 0.028580] Brought up 1 CPUs [ 0.028604] SMP: Total of 1 processors activated (545.07 BogoMIPS). [ 0.029897] devtmpfs: initialized [ 0.094661] pinctrl core: initialized pinctrl subsystem [ 0.094877] rstctl core: initialized rstctl subsystem [ 0.095375] regulator-dummy: no parameters [ 0.095941] NET: Registered protocol family 16 [ 0.096797] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.106911] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.107729] platform 49000000.edma: alias fck already exists [ 0.107762] platform 49000000.edma: alias fck already exists [ 0.107789] platform 49000000.edma: alias fck already exists [ 0.108923] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.109105] OMAP GPIO hardware version 0.1 [ 0.110480] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.111793] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.113243] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.113759] of_get_named_gpio_flags exited with status 52 [ 0.113789] gpio-rctrl rstctl.4: loaded OK [ 0.119406] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.121537] cpsw.0: No hwaddr in dt. Using 90:59:af:5d:bd:e3 from efuse [ 0.121569] cpsw.1: No hwaddr in dt. Using 90:59:af:5d:bd:e5 from efuse [ 0.137016] bio: create slab at 0 [ 0.149065] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.149286] of_get_named_gpio_flags: can't parse gpios property [ 0.149500] vmmcsd_fixed: 3300 mV [ 0.152412] SCSI subsystem initialized [ 0.152830] usbcore: registered new interface driver usbfs [ 0.152943] usbcore: registered new interface driver hub [ 0.153226] usbcore: registered new device driver usb [ 0.155285] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 0.156825] input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0 [ 0.159042] DCDC1: at 1500 mV [ 0.160248] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 0.161352] vdd_core: 925 <--> 1150 mV at 1100 mV [ 0.162501] LDO1: at 1800 mV [ 0.163588] LDO2: at 3300 mV [ 0.165562] LDO3: 1800 mV [ 0.166742] LDO4: at 3300 mV [ 0.167778] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 0.168484] omap_i2c 44e0b000.i2c: unable to select pin group [ 0.169188] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz [ 0.171512] omap_i2c 4819c000.i2c: unable to select pin group [ 0.171796] media: Linux media interface: v0.10 [ 0.171897] Linux video capture interface: v2.00 [ 0.172041] pps_core: LinuxPPS API ver. 1 registered [ 0.172058] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.172752] Advanced Linux Sound Architecture Driver Initialized. [ 0.174090] Switching to clocksource gp_timer [ 0.192203] NET: Registered protocol family 2 [ 0.193192] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.193336] TCP bind hash table entries: 4096 (order: 4, 81920 bytes) [ 0.193497] TCP: Hash tables configured (established 4096 bind 4096) [ 0.193591] TCP: reno registered [ 0.193618] UDP hash table entries: 256 (order: 1, 12288 bytes) [ 0.193664] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) [ 0.194156] NET: Registered protocol family 1 [ 0.194699] RPC: Registered named UNIX socket transport module. [ 0.194720] RPC: Registered udp transport module. [ 0.194734] RPC: Registered tcp transport module. [ 0.194748] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.195518] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.196067] CPU PMU: attempt to register multiple PMU devices! [ 0.196108] arm-pmu: probe of arm-pmu failed with error -28 [ 0.196500] omap2_mbox_probe: platform not supported [ 0.200348] VFS: Disk quotas dquot_6.5.2 [ 0.200581] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.201964] NFS: Registering the id_resolver key type [ 0.202090] Key type id_resolver registered [ 0.202107] Key type id_legacy registered [ 0.202174] jffs2: version 2.2. (NAND) (SUMMARY) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc. [ 0.202615] msgmni has been set to 996 [ 0.205482] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.205508] io scheduler noop registered [ 0.205524] io scheduler deadline registered [ 0.205568] io scheduler cfq registered (default) [ 0.207190] tps65217-bl tps65217-bl: no platform data provided [ 0.207233] tps65217-bl: probe of tps65217-bl failed with error -22 [ 0.208223] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.210769] omap_uart 44e09000.serial: did not get pins for uart0 error: -19 [ 0.211045] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0 [ 0.223456] console [ttyO0] enabled [ 0.224658] [drm] Initialized drm 1.1.0 20060810 [ 0.224678] [drm:tda998x_init], [ 0.238467] brd: module loaded [ 0.245501] loop: module loaded [ 0.245625] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 0.245704] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 0.245773] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 0.245844] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 0.245912] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 0.253087] bone-capemgr bone_capemgr.9: Baseboard: 'A335BNLT,0A5C,2513BBBK2443' [ 0.253127] bone-capemgr bone_capemgr.9: compatible-baseboard=ti,beaglebone-black [ 0.283588] bone-capemgr bone_capemgr.9: slot #0: No cape found [ 0.320694] bone-capemgr bone_capemgr.9: slot #1: No cape found [ 0.357802] bone-capemgr bone_capemgr.9: slot #2: No cape found [ 0.394912] bone-capemgr bone_capemgr.9: slot #3: No cape found [ 0.401226] bone-capemgr bone_capemgr.9: slot #4: specific override [ 0.401270] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4 [ 0.401300] bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G' [ 0.401456] bone-capemgr bone_capemgr.9: slot #5: specific override [ 0.401493] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5 [ 0.401521] bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI' [ 0.401659] bone-capemgr bone_capemgr.9: slot #6: specific override [ 0.401694] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 6 [ 0.401722] bone-capemgr bone_capemgr.9: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN' [ 0.402354] bone-capemgr bone_capemgr.9: initialized OK. [ 0.404358] OneNAND driver initializing [ 0.404843] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0' [ 0.404877] bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree [ 0.405188] bone-capemgr bone_capemgr.9: slot #4: #2 overlays [ 0.406056] bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays. [ 0.406235] bone-capemgr bone_capemgr.9: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0' [ 0.406281] bone-capemgr bone_capemgr.9: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree [ 0.407452] bone-capemgr bone_capemgr.9: slot #5: #4 overlays [ 0.409850] usbcore: registered new interface driver asix [ 0.409977] usbcore: registered new interface driver cdc_ether [ 0.410099] usbcore: registered new interface driver smsc95xx [ 0.410190] usbcore: registered new interface driver net1080 [ 0.410280] usbcore: registered new interface driver cdc_subset [ 0.410369] usbcore: registered new interface driver zaurus [ 0.410639] usbcore: registered new interface driver cdc_ncm [ 0.412603] platform 4830e000.fb: alias fck already exists [ 0.414178] bone-capemgr bone_capemgr.9: slot #5: Applied #4 overlays. [ 0.414271] bone-capemgr bone_capemgr.9: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0' [ 0.414315] bone-capemgr bone_capemgr.9: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree [ 0.414749] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI) [ 0.424359] bone-capemgr bone_capemgr.9: slot #6: Failed verification [ 0.431193] bone-capemgr bone_capemgr.9: loader: retrying slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 0.431499] usbcore: registered new interface driver cdc_acm [ 0.431516] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.431531] Initializing USB Mass Storage driver... [ 0.431656] usbcore: registered new interface driver usb-storage [ 0.431671] USB Mass Storage support registered. [ 0.431901] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 0.432344] musb-hdrc musb-hdrc.0.auto: pdev->id = 0 [ 0.432373] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK [ 0.432410] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.432430] musb-hdrc: MHDRC RTL version 2.0 [ 0.432444] musb-hdrc: setup fifo_mode 4 [ 0.432472] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 0.432625] musb-hdrc musb-hdrc.0.auto: *** mode=3 [ 0.432647] musb-hdrc musb-hdrc.0.auto: *** power=250 [ 0.433509] musb-hdrc musb-hdrc.1.auto: pdev->id = 1 [ 0.433536] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK [ 0.433575] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.433594] musb-hdrc: MHDRC RTL version 2.0 [ 0.433608] musb-hdrc: setup fifo_mode 4 [ 0.433631] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 0.433762] musb-hdrc musb-hdrc.1.auto: *** mode=1 [ 0.433783] musb-hdrc musb-hdrc.1.auto: *** power=250 [ 0.433804] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 0.434349] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 0.434388] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup [ 0.434492] usb usb1: default language 0x0409 [ 0.434551] usb usb1: udev 1, busnum 1, minor = 0 [ 0.434575] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.434597] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.434618] usb usb1: Product: MUSB HDRC host driver [ 0.434638] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd [ 0.434657] usb usb1: SerialNumber: musb-hdrc.1.auto [ 0.435337] usb usb1: usb_probe_device [ 0.435366] usb usb1: configuration #1 chosen from 1 choice [ 0.435432] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.435635] hub 1-0:1.0: usb_probe_interface [ 0.435658] hub 1-0:1.0: usb_probe_interface - got id [ 0.435685] hub 1-0:1.0: USB hub found [ 0.435724] hub 1-0:1.0: 1 port detected [ 0.435743] hub 1-0:1.0: standalone hub [ 0.435761] hub 1-0:1.0: individual port power switching [ 0.435779] hub 1-0:1.0: no over-current protection [ 0.435796] hub 1-0:1.0: Single TT [ 0.435817] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.435837] hub 1-0:1.0: power on to power good time: 10ms [ 0.435993] hub 1-0:1.0: local power source is good [ 0.436101] hub 1-0:1.0: enabling power on all ports [ 0.437136] mousedev: PS/2 mouse device common for all mice [ 0.439620] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 0.440104] i2c /dev entries driver [ 0.441891] pps_ldisc: PPS line discipline registered [ 0.442066] Driver for 1-wire Dallas network protocol. [ 0.443987] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 0.444359] cpuidle: using governor ladder [ 0.444379] cpuidle: using governor menu [ 0.444788] of_get_named_gpio_flags exited with status 6 [ 0.444807] of_get_named_gpio_flags: can't parse gpios property [ 0.444823] of_get_named_gpio_flags: can't parse gpios property [ 0.444861] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed [ 0.452109] omap_hsmmc mmc.5: Failed to get rstctl; not using any [ 0.452159] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 0.462236] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25 [ 0.462324] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24 [ 0.462573] mmc.5 supply vmmc_aux not found, using dummy regulator [ 0.463012] omap_hsmmc mmc.5: pins are not configured from the driver [ 0.490874] of_get_named_gpio_flags: can't parse gpios property [ 0.490898] of_get_named_gpio_flags: can't parse gpios property [ 0.490914] of_get_named_gpio_flags: can't parse gpios property [ 0.490968] gpio-rctrl rstctl.4: gpio_rctrl_request eMMC_RSTn [ 0.491054] omap_hsmmc mmc.11: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn [ 0.491077] gpio-rctrl rstctl.4: gpio_rctrl_deassert eMMC_RSTn [ 0.491404] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3 [ 0.491491] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2 [ 0.492020] mmc.11 supply vmmc_aux not found, using dummy regulator [ 0.492155] omap_hsmmc mmc.11: pins are not configured from the driver [ 0.520443] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8 [ 0.532181] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22 [ 0.539574] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single [ 0.548716] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 0.548770] leds-gpio gpio-leds.8: pins are not configured from the driver [ 0.548810] of_get_named_gpio_flags exited with status 53 [ 0.548832] of_get_named_gpio_flags exited with status 54 [ 0.548854] of_get_named_gpio_flags exited with status 55 [ 0.548875] of_get_named_gpio_flags exited with status 56 [ 0.548900] of_get_named_gpio_flags exited with status 53 [ 0.549134] of_get_named_gpio_flags exited with status 54 [ 0.549396] of_get_named_gpio_flags exited with status 55 [ 0.549585] of_get_named_gpio_flags exited with status 56 [ 0.550181] ledtrig-cpu: registered to indicate activity on CPUs [ 0.550608] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36 [ 0.550694] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 0.552874] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 0.553006] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5 [ 0.553168] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6 [ 0.558723] usbcore: registered new interface driver usbhid [ 0.558743] usbhid: USB HID core driver [ 0.561678] of_get_named_gpio_flags exited with status 59 [ 0.563177] davinci_evm sound.14: nxp-hdmi-hifi <-> 48038000.mcasp mapping ok [ 0.567536] TCP: cubic registered [ 0.567557] Initializing XFRM netlink socket [ 0.567601] NET: Registered protocol family 17 [ 0.567676] NET: Registered protocol family 15 [ 0.567844] Key type dns_resolver registered [ 0.568143] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.568181] ThumbEE CPU extension supported. [ 0.568224] Registering SWP/SWPB emulation handler [ 0.569378] registered taskstats version 1 [ 0.570120] [drm:tilcdc_drm_init], init [ 0.571189] [drm:drm_platform_init], [ 0.571212] [drm:drm_get_platform_dev], [ 0.571302] [drm:drm_get_minor], [ 0.571927] [drm:drm_get_minor], new minor assigned 64 [ 0.571950] [drm:drm_get_minor], [ 0.572414] [drm:drm_get_minor], new minor assigned 0 [ 0.572516] of_get_named_gpio_flags: can't parse gpios property [ 0.572543] tilcdc 4830e000.fb: No power control GPIO [ 0.572565] [drm:tilcdc_load], Maximum Bandwidth Value 105840000 [ 0.572676] [drm:tilcdc_load], Maximum Horizontal Pixel Width Value 2048pixels [ 0.572701] [drm:tilcdc_load], Maximum Pixel Clock Value 126000KHz [ 0.572721] [drm:tilcdc_load], Allowing Standard Monitor Modes: true [ 0.572739] [drm:tilcdc_load], Allowing Non Audio Monitor Modes: false [ 0.572954] [drm:modeset_init], loading module: slave [ 0.603697] mmc1: BKOPS_EN bit is not set [ 0.606483] mmc1: new high speed MMC card at address 0001 [ 0.607280] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 0.607641] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 0.608056] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 0.610259] mmcblk0: p1 p2 [ 0.612975] mmcblk0boot1: unknown partition table [ 0.614987] mmcblk0boot0: unknown partition table [ 0.621934] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 0.622002] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 0.681170] tilcdc 4830e000.fb: found TDA19988 [ 0.681733] [drm:tda998x_encoder_create_resources], [ 0.681759] [drm:drm_sysfs_connector_add], adding "HDMI-A-1" to sysfs [ 0.681961] [drm:drm_sysfs_hotplug_event], generating hotplug event [ 0.682055] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.682070] [drm] No driver support for vblank timestamp query. [ 0.682138] [drm:drm_irq_install], irq=52 [ 0.682244] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 0.682511] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 0.682546] tilcdc 4830e000.fb: No connectors reported connected with modes [ 0.682562] [drm:drm_setup_crtcs], [ 0.682580] [drm:drm_enable_connectors], connector 5 enabled? no [ 0.682601] [drm:drm_setup_crtcs], picking CRTCs for 2048x2048 config [ 0.682625] [drm] Cannot find any crtc or sizes - going 1024x768 [ 0.682639] [drm:drm_fbdev_cma_create], surface width(1024), height(768) and bpp(16) [ 0.686648] [drm:drm_crtc_helper_set_config], [ 0.686660] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 0.700039] Console: switching to colour frame buffer device 128x48 [ 0.714745] tilcdc 4830e000.fb: fb0: frame buffer device [ 0.714766] tilcdc 4830e000.fb: registered panic notifier [ 0.714873] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0 [ 0.740688] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 0.764070] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 0.764093] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 0.765139] libphy: 4a101000.mdio: probed [ 0.765171] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 0.765412] Detected MACID = 90:59:af:5d:bd:e3 [ 0.765527] cpsw 4a100000.ethernet: NAPI disabled [ 0.767121] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 0.774264] ALSA device list: [ 0.774287] #0: TI BeagleBone Black [ 0.797618] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 0.797682] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 0.800254] devtmpfs: mounted [ 0.800558] Freeing init memory: 264K [ 0.846104] usb 1-1: new high-speed USB device number 2 using musb-hdrc [ 0.966015] usb 1-1: default language 0x0409 [ 0.966586] usb 1-1: udev 2, busnum 1, minor = 1 [ 0.966602] usb 1-1: New USB device found, idVendor=7392, idProduct=7811 [ 0.966616] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 0.966627] usb 1-1: Product: 802.11n WLAN Adapter [ 0.966638] usb 1-1: Manufacturer: Realtek [ 0.966649] usb 1-1: SerialNumber: 00e04c000001 [ 0.967113] usb 1-1: usb_probe_device [ 0.967168] usb 1-1: configuration #1 chosen from 1 choice [ 0.967329] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 0.967994] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 0.968026] hub 1-0:1.0: port 1 enable change, status 00000503 [ 1.272731] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ; angstrom) [ 1.362320] systemd[1]: Inserted module 'autofs4' [ 1.364119] systemd[1]: Set hostname to . [ 1.368953] systemd[1]: Initializing machine ID from random generator. [ 1.369253] systemd[1]: Installed transient /etc/machine-id file. [ 1.661401] systemd[1]: Expecting device dev-ttyO0.device... [ 1.661533] systemd[1]: Expecting device dev-ttyGS0.device... [ 1.661610] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 1.662045] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.662162] systemd[1]: Starting Remote File Systems. [ 1.662245] systemd[1]: Reached target Remote File Systems. [ 1.662306] systemd[1]: Starting Syslog Socket. [ 1.662698] systemd[1]: Listening on Syslog Socket. [ 1.662800] systemd[1]: Starting Delayed Shutdown Socket. [ 1.662969] systemd[1]: Listening on Delayed Shutdown Socket. [ 1.663037] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 1.663187] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 1.663453] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 1.664139] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.664794] systemd[1]: Starting udev Kernel Socket. [ 1.665028] systemd[1]: Listening on udev Kernel Socket. [ 1.665408] systemd[1]: Starting udev Control Socket. [ 1.665642] systemd[1]: Listening on udev Control Socket. [ 1.665745] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 1.666039] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 1.666111] systemd[1]: Starting Swap. [ 1.666185] systemd[1]: Reached target Swap. [ 1.666289] systemd[1]: Starting Journal Socket. [ 1.666758] systemd[1]: Listening on Journal Socket. [ 1.666866] systemd[1]: Starting Syslog. [ 1.666936] systemd[1]: Reached target Syslog. [ 1.667066] systemd[1]: Starting File System Check on Root Device... [ 1.670221] systemd[1]: Mounting Debug File System... [ 1.677346] systemd[1]: Mounted Huge Pages File System. [ 1.677497] systemd[1]: Started Machine ID first boot configure. [ 1.682561] systemd[1]: Starting udev Coldplug all Devices... [ 1.745492] systemd[1]: Starting Apply Kernel Variables... [ 1.750753] systemd[1]: Mounting POSIX Message Queue File System... [ 1.776446] systemd[1]: Starting Load Kernel Modules... [ 1.804067] systemd[1]: Started Set Up Additional Binary Formats. [ 1.804224] systemd[1]: Starting Journal Service... [ 1.809755] systemd[1]: Started Journal Service. [ 1.810395] systemd[1]: Starting udev Kernel Device Manager... [ 1.917908] systemd-udevd[93]: starting version 196 [ 1.979319] Bluetooth: Core ver 2.16 [ 1.979406] NET: Registered protocol family 31 [ 1.979417] Bluetooth: HCI device and connection manager initialized [ 1.979457] Bluetooth: HCI socket layer initialized [ 1.979473] Bluetooth: L2CAP socket layer initialized [ 1.979511] Bluetooth: SCO socket layer initialized [ 2.002029] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.002080] Bluetooth: HIDP socket layer initialized [ 2.080940] NET: Registered protocol family 10 [ 2.118677] NET: Registered protocol family 23 [ 2.133617] IrCOMM protocol (Dag Brattli) [ 2.183501] Bluetooth: RFCOMM TTY layer initialized [ 2.183599] Bluetooth: RFCOMM socket layer initialized [ 2.183610] Bluetooth: RFCOMM ver 1.11 [ 2.469214] rtw driver version=v3.4.4_4749.20121105 [ 2.469232] Build at: Oct 4 2013 23:37:24 [ 2.472825] rtl8192cu 1-1:1.0: usb_probe_interface [ 2.472850] rtl8192cu 1-1:1.0: usb_probe_interface - got id [ 2.472965] register rtw_netdev_ops to netdev_ops [ 2.473055] CHIP TYPE: RTL8188C_8192C [ 2.473607] usb_endpoint_descriptor(0): [ 2.473621] bLength=7 [ 2.473628] bDescriptorType=5 [ 2.473636] bEndpointAddress=81 [ 2.473643] wMaxPacketSize=200 [ 2.473649] bInterval=0 [ 2.473656] RT_usb_endpoint_is_bulk_in = 1 [ 2.473663] usb_endpoint_descriptor(1): [ 2.473672] bLength=7 [ 2.473679] bDescriptorType=5 [ 2.473685] bEndpointAddress=2 [ 2.473692] wMaxPacketSize=200 [ 2.473698] bInterval=0 [ 2.473705] RT_usb_endpoint_is_bulk_out = 2 [ 2.473712] usb_endpoint_descriptor(2): [ 2.473721] bLength=7 [ 2.473728] bDescriptorType=5 [ 2.473734] bEndpointAddress=3 [ 2.473741] wMaxPacketSize=200 [ 2.473748] bInterval=0 [ 2.473754] RT_usb_endpoint_is_bulk_out = 3 [ 2.473761] usb_endpoint_descriptor(3): [ 2.473770] bLength=7 [ 2.473777] bDescriptorType=5 [ 2.473783] bEndpointAddress=84 [ 2.473790] wMaxPacketSize=40 [ 2.473796] bInterval=1 [ 2.473804] RT_usb_endpoint_is_int_in = 4, Interval = 1 [ 2.473812] nr_endpoint=4, in_num=2, out_num=2 [ 2.473821] USB_SPEED_HIGH [ 2.473948] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C. [ 2.473958] RF_Type is 3!! [ 2.476123] EEPROM type is E-FUSE [ 2.476141] ====> ReadAdapterInfo8192C [ 2.477022] Boot from EFUSE, Autoload OK ! [ 2.610014] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 2.815381] EEPROMVID = 0x7392 [ 2.815399] EEPROMPID = 0x7811 [ 2.815408] EEPROMCustomerID : 0x00 [ 2.815415] EEPROMSubCustomerID: 0x00 [ 2.815423] RT_CustomerID: 0x00 [ 2.815437] _ReadMACAddress MAC Address from EFUSE = 80:1f:02:ab:a5:a6 [ 2.815450] EEPROMRegulatory = 0x0 [ 2.815458] _ReadBoardType(0) [ 2.815467] BT Coexistance = disable [ 2.815476] RT_ChannelPlan: 0x02 [ 2.815487] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0) [ 2.815496] ### PS params=> power_mgnt(1),usbss_enable(0) ### [ 2.815504] ### AntDivCfg(0) [ 2.815513] readAdapterInfo_8192CU(): REPLACEMENT = 1 [ 2.815523] <==== ReadAdapterInfo8192C in 339 ms [ 2.816345] rtw_macaddr_cfg MAC Address = 80:1f:02:ab:a5:a6 [ 2.816360] MAC Address from pnetdev->dev_addr= 80:1f:02:ab:a5:a6 [ 2.821363] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0 [ 2.821547] usbcore: registered new interface driver rtl8192cu [ 3.249368] systemd-journald[92]: Received SIGUSR1 [ 4.616279] udc musb-hdrc.0.auto: registering UDC driver [g_multi] [ 4.616391] gadget: using random self ethernet address [ 4.632112] usb0: MAC 56:5b:87:1d:df:42 [ 4.632132] usb0: HOST MAC 90:59:af:5d:bd:e5 [ 4.632502] gserial_setup: registered 1 ttyGS* device [ 4.632647] lun0: open backing file: /dev/mmcblk0p1 [ 4.635234] gadget: Mass Storage Function, version: 2009/09/11 [ 4.635254] gadget: Number of LUNs=1 [ 4.635273] lun0: LUN: removable file: /dev/mmcblk0p1 [ 4.635284] gadget: I/O thread pid: 178 [ 4.635303] gadget: adding config #1 'Multifunction with RNDIS'/bf97359c [ 4.635361] gadget: adding 'rndis'/dd0c7bc0 to config 'Multifunction with RNDIS'/bf97359c [ 4.635390] rndis_register: configNr = 0 [ 4.635398] rndis_set_param_medium: 0 0 [ 4.635409] gadget: RNDIS: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in [ 4.635424] gadget: adding 'acm'/dd0c7b00 to config 'Multifunction with RNDIS'/bf97359c [ 4.635445] gadget: acm ttyGS0: dual speed IN/ep3in OUT/ep2out NOTIFY/ep4in [ 4.635458] gadget: adding 'Mass Storage Function'/dd092a40 to config 'Multifunction with RNDIS'/bf97359c [ 4.635476] gadget: cfg 1/bf97359c speeds: high full [ 4.635486] gadget: interface 0 = rndis/dd0c7bc0 [ 4.635496] gadget: interface 1 = rndis/dd0c7bc0 [ 4.635505] gadget: interface 2 = acm/dd0c7b00 [ 4.635515] gadget: interface 3 = acm/dd0c7b00 [ 4.635524] gadget: interface 4 = Mass Storage Function/dd092a40 [ 4.635539] gadget: Multifunction Composite Gadget [ 4.635565] gadget: g_multi ready [ 4.635605] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver [ 4.639296] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2 [ 4.639340] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup [ 4.639412] usb usb2: default language 0x0409 [ 4.639447] usb usb2: udev 1, busnum 2, minor = 128 [ 4.639461] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.639474] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.639487] usb usb2: Product: MUSB HDRC host driver [ 4.639498] usb usb2: Manufacturer: Linux 3.8.13 musb-hcd [ 4.639509] usb usb2: SerialNumber: musb-hdrc.0.auto [ 4.643222] usb usb2: usb_probe_device [ 4.643245] usb usb2: configuration #1 chosen from 1 choice [ 4.643303] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 4.643467] hub 2-0:1.0: usb_probe_interface [ 4.643481] hub 2-0:1.0: usb_probe_interface - got id [ 4.643500] hub 2-0:1.0: USB hub found [ 4.643524] hub 2-0:1.0: 1 port detected [ 4.643536] hub 2-0:1.0: standalone hub [ 4.643546] hub 2-0:1.0: individual port power switching [ 4.643556] hub 2-0:1.0: no over-current protection [ 4.643566] hub 2-0:1.0: Single TT [ 4.643579] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 4.643590] hub 2-0:1.0: power on to power good time: 10ms [ 4.643614] hub 2-0:1.0: local power source is good [ 4.643681] hub 2-0:1.0: enabling power on all ports [ 4.744679] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 5.219602] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.761966] usb0: eth_open [ 5.768212] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 6.131846] [drm:drm_stub_open], [ 6.131877] [drm:drm_open_helper], pid = 202, minor = 0 [ 6.131904] [drm:drm_setup], [ 6.131937] [drm:drm_release], open_count = 1 [ 6.131951] [drm:drm_release], pid = 202, device = 0xe200, open_count = 1 [ 6.131977] [drm:drm_lastclose], [ 6.131989] [drm:drm_crtc_helper_set_config], [ 6.131998] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 6.132013] [drm:drm_lastclose], driver lastclose completed [ 6.132024] [drm:drm_lastclose], lastclose completed [ 6.132586] [drm:drm_stub_open], [ 6.132607] [drm:drm_open_helper], pid = 202, minor = 0 [ 6.132629] [drm:drm_setup], [ 6.132716] [drm:drm_ioctl], pid=202, cmd=0xc010640c, nr=0x0c, dev 0xe200, auth=1 [ 6.132770] [drm:drm_ioctl], pid=202, cmd=0xc04064a0, nr=0xa0, dev 0xe200, auth=1 [ 6.132790] [drm:drm_mode_getresources], CRTC[1] CONNECTORS[1] ENCODERS[1] [ 6.132822] [drm:drm_ioctl], pid=202, cmd=0xc04064a0, nr=0xa0, dev 0xe200, auth=1 [ 6.132839] [drm:drm_mode_getresources], CRTC[1] CONNECTORS[1] ENCODERS[1] [ 6.132900] [drm:drm_ioctl], pid=202, cmd=0xc02064b2, nr=0xb2, dev 0xe200, auth=1 [ 6.133028] [drm:drm_ioctl], pid=202, cmd=0xc01c64ae, nr=0xae, dev 0xe200, auth=1 [ 6.133058] [drm:drm_mode_addfb], [FB:7] [ 6.133081] [drm:drm_ioctl], pid=202, cmd=0xc00464af, nr=0xaf, dev 0xe200, auth=1 [ 6.133098] [drm:drm_framebuffer_unreference], FB ID: 7 [ 6.133133] [drm:drm_ioctl], pid=202, cmd=0xc00464b4, nr=0xb4, dev 0xe200, auth=1 [ 6.147799] [drm:drm_ioctl], pid=202, cmd=0xc010640c, nr=0x0c, dev 0xe200, auth=1 [ 6.147924] [drm:drm_ioctl], pid=202, cmd=0xc010640c, nr=0x0c, dev 0xe200, auth=1 [ 6.147979] [drm:drm_ioctl], pid=202, cmd=0xc04064a0, nr=0xa0, dev 0xe200, auth=1 [ 6.148001] [drm:drm_mode_getresources], CRTC[1] CONNECTORS[1] ENCODERS[1] [ 6.148018] [drm:drm_ioctl], pid=202, cmd=0xc04064a0, nr=0xa0, dev 0xe200, auth=1 [ 6.148034] [drm:drm_mode_getresources], CRTC[1] CONNECTORS[1] ENCODERS[1] [ 6.152934] [drm:drm_ioctl], pid=202, cmd=0xc06864a1, nr=0xa1, dev 0xe200, auth=1 [ 6.152997] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 6.153013] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 6.153031] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 6.156810] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 6.156866] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 6.156883] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 6.156901] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 6.157099] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 6.157176] [drm:drm_ioctl], pid=202, cmd=0xc01464a6, nr=0xa6, dev 0xe200, auth=1 [ 6.157597] [drm:drm_ioctl], pid=202, cmd=0xc04064aa, nr=0xaa, dev 0xe200, auth=1 [ 6.157625] [drm:drm_ioctl], pid=202, cmd=0xc04064aa, nr=0xaa, dev 0xe200, auth=1 [ 6.157678] [drm:drm_ioctl], pid=202, cmd=0xc04064aa, nr=0xaa, dev 0xe200, auth=1 [ 6.157704] [drm:drm_ioctl], pid=202, cmd=0xc04064aa, nr=0xaa, dev 0xe200, auth=1 [ 6.157823] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 6.157841] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 6.157856] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 6.168534] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 6.168597] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 6.168616] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 6.168634] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 6.168833] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 6.190528] [drm:drm_ioctl], pid=202, cmd=0x641e, nr=0x1e, dev 0xe200, auth=1 [ 6.190571] [drm:drm_ioctl], pid=202, cmd=0xc02064b2, nr=0xb2, dev 0xe200, auth=1 [ 6.209584] [drm:drm_ioctl], pid=202, cmd=0xc02064b2, nr=0xb2, dev 0xe200, auth=1 [ 6.221912] [drm:drm_ioctl], pid=202, cmd=0xc04064aa, nr=0xaa, dev 0xe200, auth=1 [ 6.221957] [drm:drm_ioctl], pid=202, cmd=0xc04064aa, nr=0xaa, dev 0xe200, auth=1 [ 6.221983] [drm:drm_ioctl], pid=202, cmd=0xc04064aa, nr=0xaa, dev 0xe200, auth=1 [ 6.222004] [drm:drm_ioctl], pid=202, cmd=0xc04064aa, nr=0xaa, dev 0xe200, auth=1 [ 6.222498] [drm:drm_ioctl], pid=202, cmd=0x641e, nr=0x1e, dev 0xe200, auth=1 [ 6.222552] [drm:drm_ioctl], pid=202, cmd=0xc06864a2, nr=0xa2, dev 0xe200, auth=1 [ 6.222571] [drm:drm_mode_setcrtc], [CRTC:3] [ 6.222583] [drm:drm_crtc_helper_set_config], [ 6.222592] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 6.455237] [drm:drm_ioctl], pid=202, cmd=0xc06864a2, nr=0xa2, dev 0xe200, auth=1 [ 6.455280] [drm:drm_mode_setcrtc], [CRTC:3] [ 6.455293] [drm:drm_crtc_helper_set_config], [ 6.455303] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 6.458630] [drm:drm_ioctl], pid=202, cmd=0xc01064b3, nr=0xb3, dev 0xe200, auth=1 [ 6.458707] [drm:drm_vm_open_locked], 0xb6f16000,0x00004000 [ 6.458731] [drm:drm_ioctl], pid=202, cmd=0xc01064b3, nr=0xb3, dev 0xe200, auth=1 [ 6.458756] [drm:drm_vm_open_locked], 0xb6926000,0x00180000 [ 6.616423] net eth0: initializing cpsw version 1.12 (0) [ 6.619228] net eth0: phy found : id is : 0x7c0f1 [ 6.619253] libphy: PHY 4a101000.mdio:01 not found [ 6.624323] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 6.688719] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.760756] [drm:drm_vm_open_locked], 0xb6926000,0x00180000 [ 6.761166] [drm:drm_vm_open_locked], 0xb6f16000,0x00004000 [ 6.769781] [drm:drm_vm_close_locked], 0xb6926000,0x00180000 [ 6.769841] [drm:drm_vm_close_locked], 0xb6f16000,0x00004000 [ 7.112028] +871x_drv - drv_open, bup=0 [ 7.122974] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC [ 7.122999] FirmwareDownload92C accquire FW from embedded image [ 7.123010] fw_ver=v80, fw_subver=0, sig=0x88c0 [ 7.203603] fw download ok! [ 7.203622] Set RF Chip ID to RF_6052 and RF type to 1T1R. [ 7.715644] IQK:Start!!! [ 7.738764] Path A Rx IQK fail!! [ 7.749241] Path A IQK Success!! [ 7.764133] Path A Rx IQK fail!! [ 7.772523] Path A IQK Success!! [ 7.778027] IQK: final_candidate is 0 [ 7.778049] IQK: RegE94=105 RegE9C=13 RegEA4=ff RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0 Path A IQ Calibration Success ! [ 7.901000] pdmpriv->TxPowerTrackControl = 1 [ 7.903205] MAC Address from REG_MACID = 80:1f:02:ab:a5:a6 [ 7.903219] rtl8192cu_hal_init in 791ms [ 7.903231] MAC Address = 80:1f:02:ab:a5:a6 [ 7.913345] -871x_drv - drv_open, bup=1 [ 7.913797] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.913846] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH! [ 7.913897] set_mode = IW_MODE_INFRA [ 7.915054] =>rtw_wx_set_essid [ 7.915072] ssid=g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a, len=32 [ 7.915101] Set SSID under fw_state=0x00000008 [ 7.915125] <=rtw_wx_set_essid, ret 0 [ 7.954464] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH! [ 8.076885] [drm:drm_ioctl], pid=202, cmd=0xc01864b1, nr=0xb1, dev 0xe200, auth=1 [ 8.076931] [drm:drm_ioctl], ret = -22 [ 8.228740] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 8.228775] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 8.228797] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 8.229135] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 8.229166] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 8.229181] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 8.229195] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 8.229383] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 8.233113] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 8.233145] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 8.233166] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 8.233398] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 8.233427] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 8.233442] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 8.233456] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 8.233649] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 9.219832] survey done event(4) [ 9.219867] rtw_select_and_join_from_scanned_queue: return _FAIL(candidate == NULL) [ 9.219879] try_to_join, but select scanning queue fail, to_roaming:0 [ 9.262504] [drm:drm_vm_open_locked], 0xb6926000,0x00180000 [ 9.262889] [drm:drm_vm_open_locked], 0xb6f16000,0x00004000 [ 9.271680] [drm:drm_vm_close_locked], 0xb6926000,0x00180000 [ 9.271741] [drm:drm_vm_close_locked], 0xb6f16000,0x00004000 [ 9.696346] libphy: 4a101000.mdio:00 - Link is Up - 100/Full [ 9.696411] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.750787] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 11.178965] survey done event(7) [ 11.875391] ==>pwr_state_check_handler .fw_state(8) [ 11.875417] ==> rtw_ps_cmd , enqueue CMD [ 11.875470] ==>rtw_ps_processor .fw_state(8) [ 11.875481] ==>ips_enter cnts:1 [ 11.875602] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00020808).... [ 11.875615] ===> rtw_ips_pwr_down................... [ 11.875737] ====> rtw_ips_dev_unload... [ 11.890922] usb_read_port_cancel [ 11.898981] usb_write_port_cancel [ 11.899097] ==> rtl8192cu_hal_deinit [ 11.899107] bkeepfwalive(0) [ 11.899115] card disble without HWSM........... [ 11.903148] <=== rtw_ips_pwr_down..................... in 27ms [ 14.182605] rfpwrstate_check call ips_leave.... [ 14.182633] ==>ips_leave cnts:1 [ 14.182642] ===> rtw_ips_pwr_up.............. [ 14.182657] ===> ips_netdrv_open......... [ 14.186137] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC [ 14.186156] FirmwareDownload92C accquire FW from embedded image [ 14.186166] fw_ver=v80, fw_subver=0, sig=0x88c0 [ 14.254472] fw download ok! [ 14.254497] Set RF Chip ID to RF_6052 and RF type to 1T1R. [ 14.888764] IQK:Start!!! [ 14.918378] Path A IQK Success!! [ 14.945993] Path A IQK Success!! [ 14.967223] IQK: final_candidate is 0 [ 14.967247] IQK: RegE94=105 RegE9C=13 RegEA4=ff RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0 Path A IQ Calibration Success ! [ 15.086789] pdmpriv->TxPowerTrackControl = 1 [ 15.093270] MAC Address from REG_MACID = 80:1f:02:ab:a5:a6 [ 15.093292] rtl8192cu_hal_init in 910ms [ 15.093371] <=== rtw_ips_pwr_up.............. in 910ms [ 15.093684] ==> ips_leave.....LED(0x00028080)... [ 16.166212] gs_open: ttyGS0 (dd5d3c00,dd075600) [ 16.166328] gs_close: ttyGS0 (dd5d3c00,dd075600) ... [ 16.166342] gs_close: ttyGS0 (dd5d3c00,dd075600) done! [ 16.167017] gs_open: ttyGS0 (dd5d3c00,dd58c980) [ 16.167112] gs_close: ttyGS0 (dd5d3c00,dd58c980) ... [ 16.167125] gs_close: ttyGS0 (dd5d3c00,dd58c980) done! [ 16.193417] systemd-udevd[93]: worker [109] terminated by signal 11 (Segmentation fault) [ 16.281490] gs_open: ttyGS0 (dd5d3c00,dd58c5c0) [ 16.285720] gs_close: ttyGS0 (dd5d3c00,dd58c5c0) ... [ 16.285742] gs_close: ttyGS0 (dd5d3c00,dd58c5c0) done! [ 16.286023] gs_open: ttyGS0 (dd5d3c00,dd40b540) [ 16.308695] systemd-udevd[93]: worker [109] failed while handling '/devices/ocp.3/47400000.usb/musb-hdrc.0.auto/gadget/net/usb0' [ 16.407298] survey done event(4) [ 17.094141] ==>pwr_state_check_handler .fw_state(8) [ 17.094167] ==> rtw_ps_cmd , enqueue CMD [ 17.094208] ==>rtw_ps_processor .fw_state(8) [ 17.094218] ==>ips_enter cnts:2 [ 17.094333] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00028000).... [ 17.094346] ===> rtw_ips_pwr_down................... [ 17.094453] ====> rtw_ips_dev_unload... [ 17.109695] usb_read_port_cancel [ 17.109841] usb_write_port_cancel [ 17.109946] ==> rtl8192cu_hal_deinit [ 17.109955] bkeepfwalive(0) [ 17.109962] card disble without HWSM........... [ 17.112233] <=== rtw_ips_pwr_down..................... in 17ms [ 18.213721] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 18.213788] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 18.213809] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 18.217252] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 18.217310] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 18.217329] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 18.217347] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 18.217554] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 18.258446] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 18.258478] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 18.258499] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 18.262310] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 18.262371] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 18.262389] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 18.262407] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 18.262625] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 18.285185] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 18.285221] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 18.285241] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 18.285590] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 18.285621] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 18.285637] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 18.285651] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 18.285847] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 18.301465] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 18.301500] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 18.301520] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 18.301778] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 18.301807] [drm:drm_ioctl], pid=202, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 18.301822] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 18.301837] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] [ 18.302034] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:HDMI-A-1] disconnected [ 19.712060] rfpwrstate_check call ips_leave.... [ 19.712086] ==>ips_leave cnts:2 [ 19.712095] ===> rtw_ips_pwr_up.............. [ 19.712110] ===> ips_netdrv_open......... [ 19.723131] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC [ 19.723154] FirmwareDownload92C accquire FW from embedded image [ 19.723165] fw_ver=v80, fw_subver=0, sig=0x88c0 [ 19.775907] fw download ok! [ 19.775930] Set RF Chip ID to RF_6052 and RF type to 1T1R. [ 20.269466] IQK:Start!!! [ 20.286968] Path A IQK Success!! [ 20.309207] Path A IQK Success!! [ 20.320814] IQK: final_candidate is 0 [ 20.320838] IQK: RegE94=105 RegE9C=13 RegEA4=ff RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0 Path A IQ Calibration Success ! [ 20.438245] pdmpriv->TxPowerTrackControl = 1 [ 20.444470] MAC Address from REG_MACID = 80:1f:02:ab:a5:a6 [ 20.444488] rtl8192cu_hal_init in 732ms [ 20.444564] <=== rtw_ips_pwr_up.............. in 732ms [ 20.444635] ==> ips_leave.....LED(0x00028080)... [ 20.781934] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 21.745968] survey done event(5) [ 22.445725] ==>pwr_state_check_handler .fw_state(8) [ 22.445751] ==> rtw_ps_cmd , enqueue CMD [ 22.445816] ==>rtw_ps_processor .fw_state(8) [ 22.445827] ==>ips_enter cnts:3 [ 22.445946] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00028000).... [ 22.445958] ===> rtw_ips_pwr_down................... [ 22.446076] ====> rtw_ips_dev_unload... [ 22.461349] usb_read_port_cancel [ 22.461476] usb_write_port_cancel [ 22.461579] ==> rtl8192cu_hal_deinit [ 22.461588] bkeepfwalive(0) [ 22.461595] card disble without HWSM........... [ 22.463834] <=== rtw_ips_pwr_down..................... in 17ms [ 30.813220] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 32.083327] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=0 [ 40.844746] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 48.754561] rfpwrstate_check call ips_leave.... [ 48.754588] ==>ips_leave cnts:3 [ 48.754597] ===> rtw_ips_pwr_up.............. [ 48.754611] ===> ips_netdrv_open......... [ 48.761914] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC [ 48.761935] FirmwareDownload92C accquire FW from embedded image [ 48.761947] fw_ver=v80, fw_subver=0, sig=0x88c0 [ 48.783363] fw download ok! [ 48.783382] Set RF Chip ID to RF_6052 and RF type to 1T1R. [ 49.080790] IQK:Start!!! [ 49.088665] Path A IQK Success!! [ 49.095166] Path A IQK Success!! [ 49.099720] IQK: final_candidate is 0 [ 49.099740] IQK: RegE94=105 RegE9C=13 RegEA4=ff RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0 Path A IQ Calibration Success ! [ 49.210265] pdmpriv->TxPowerTrackControl = 1 [ 49.211913] MAC Address from REG_MACID = 80:1f:02:ab:a5:a6 [ 49.211925] rtl8192cu_hal_init in 457ms [ 49.211998] <=== rtw_ips_pwr_up.............. in 457ms [ 49.212367] ==> ips_leave.....LED(0x00028080)... [ 50.511640] survey done event(f) [ 50.876489] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 51.212187] ==>pwr_state_check_handler .fw_state(8) [ 51.212205] ==> rtw_ps_cmd , enqueue CMD [ 51.212245] ==>rtw_ps_processor .fw_state(8) [ 51.212256] ==>ips_enter cnts:4 [ 51.212336] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00028000).... [ 51.212348] ===> rtw_ips_pwr_down................... [ 51.212454] ====> rtw_ips_dev_unload... [ 51.227085] usb_read_port_cancel [ 51.235790] usb_write_port_cancel [ 51.235901] ==> rtl8192cu_hal_deinit [ 51.235911] bkeepfwalive(0) [ 51.235918] card disble without HWSM........... [ 51.239614] <=== rtw_ips_pwr_down..................... in 27ms [ 60.908203] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 70.939935] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 80.971670] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 91.003399] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 101.035316] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 111.066973] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 121.098698] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 131.130315] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 131.518808] rfpwrstate_check call ips_leave.... [ 131.518829] ==>ips_leave cnts:4 [ 131.518838] ===> rtw_ips_pwr_up.............. [ 131.518850] ===> ips_netdrv_open......... [ 131.525630] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC [ 131.525651] FirmwareDownload92C accquire FW from embedded image [ 131.525661] fw_ver=v80, fw_subver=0, sig=0x88c0 [ 131.547752] fw download ok! [ 131.547772] Set RF Chip ID to RF_6052 and RF type to 1T1R. [ 131.844471] IQK:Start!!! [ 131.852208] Path A IQK Success!! [ 131.859085] Path A IQK Success!! [ 131.863881] IQK: final_candidate is 0 [ 131.863902] IQK: RegE94=105 RegE9C=13 RegEA4=ff RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0 Path A IQ Calibration Success ! [ 131.975962] pdmpriv->TxPowerTrackControl = 1 [ 131.977670] MAC Address from REG_MACID = 80:1f:02:ab:a5:a6 [ 131.977682] rtl8192cu_hal_init in 457ms [ 131.977799] <=== rtw_ips_pwr_up.............. in 458ms [ 131.978639] ==> ips_leave.....LED(0x00028080)... [ 133.277223] survey done event(5) [ 133.981745] ==>pwr_state_check_handler .fw_state(8) [ 133.981767] ==> rtw_ps_cmd , enqueue CMD [ 133.981806] ==>rtw_ps_processor .fw_state(8) [ 133.981817] ==>ips_enter cnts:5 [ 133.981896] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00028000).... [ 133.981909] ===> rtw_ips_pwr_down................... [ 133.982010] ====> rtw_ips_dev_unload... [ 133.996710] usb_read_port_cancel [ 133.999478] usb_write_port_cancel [ 133.999589] ==> rtl8192cu_hal_deinit [ 133.999598] bkeepfwalive(0) [ 133.999605] card disble without HWSM........... [ 134.001756] <=== rtw_ips_pwr_down..................... in 19ms [ 141.162026] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 151.193774] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 161.225483] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 171.257209] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 181.288926] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 191.320656] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 201.352377] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 211.384104] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 221.415831] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 231.447563] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 241.479205] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 251.510865] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 261.542530] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 271.574191] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 281.605855] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 291.637530] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 301.669201] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 311.700874] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 321.732530] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 331.764228] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 341.795897] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 351.827569] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 361.859262] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 371.890936] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 376.290214] rfpwrstate_check call ips_leave.... [ 376.290240] ==>ips_leave cnts:5 [ 376.290249] ===> rtw_ips_pwr_up.............. [ 376.290263] ===> ips_netdrv_open......... [ 376.297218] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC [ 376.297239] FirmwareDownload92C accquire FW from embedded image [ 376.297250] fw_ver=v80, fw_subver=0, sig=0x88c0 [ 376.318741] fw download ok! [ 376.318758] Set RF Chip ID to RF_6052 and RF type to 1T1R. [ 376.616935] IQK:Start!!! [ 376.624791] Path A IQK Success!! [ 376.631380] Path A IQK Success!! [ 376.636141] IQK: final_candidate is 0 [ 376.636163] IQK: RegE94=105 RegE9C=13 RegEA4=ff RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0 Path A IQ Calibration Success ! [ 376.748526] pdmpriv->TxPowerTrackControl = 1 [ 376.750206] MAC Address from REG_MACID = 80:1f:02:ab:a5:a6 [ 376.750218] rtl8192cu_hal_init in 458ms [ 376.750336] <=== rtw_ips_pwr_up.............. in 460ms [ 376.750746] ==> ips_leave.....LED(0x00028080)... [ 378.051842] survey done event(4) [ 378.758173] ==>pwr_state_check_handler .fw_state(8) [ 378.758196] ==> rtw_ps_cmd , enqueue CMD [ 378.758236] ==>rtw_ps_processor .fw_state(8) [ 378.758247] ==>ips_enter cnts:6 [ 378.758327] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00028000).... [ 378.758340] ===> rtw_ips_pwr_down................... [ 378.758447] ====> rtw_ips_dev_unload... [ 378.773388] usb_read_port_cancel [ 378.773883] usb_write_port_cancel [ 378.773989] ==> rtl8192cu_hal_deinit [ 378.773998] bkeepfwalive(0) [ 378.774005] card disble without HWSM........... [ 378.776425] <=== rtw_ips_pwr_down..................... in 17ms [ 381.922619] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 391.954322] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 401.986010] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 412.017690] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 422.049394] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 432.081078] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 442.112925] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 452.144439] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 462.176138] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 472.207828] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 482.239539] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 492.271221] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 502.302918] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 512.334617] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 522.366313] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 532.398006] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 542.429716] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 552.461413] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 562.493113] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 572.524800] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 582.556516] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 592.588205] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 602.620251] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 612.651901] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 622.683638] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 632.715350] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 642.747072] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 652.778722] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 662.810459] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 672.842219] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 678.081420] rfpwrstate_check call ips_leave.... [ 678.081482] ==>ips_leave cnts:6 [ 678.081507] ===> rtw_ips_pwr_up.............. [ 678.081545] ===> ips_netdrv_open......... [ 678.094566] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC [ 678.094611] FirmwareDownload92C accquire FW from embedded image [ 678.094644] fw_ver=v80, fw_subver=0, sig=0x88c0 [ 678.145090] fw download ok! [ 678.145134] Set RF Chip ID to RF_6052 and RF type to 1T1R. [ 678.559123] IQK:Start!!! [ 678.578830] Path A IQK Success!! [ 678.594250] Path A IQK Success!! [ 678.602891] IQK: final_candidate is 0 [ 678.602946] IQK: RegE94=105 RegE9C=13 RegEA4=ff RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0 Path A IQ Calibration Success ! [ 678.719038] pdmpriv->TxPowerTrackControl = 1 [ 678.727781] MAC Address from REG_MACID = 80:1f:02:ab:a5:a6 [ 678.727822] rtl8192cu_hal_init in 646ms [ 678.728019] <=== rtw_ips_pwr_up.............. in 646ms [ 678.728148] ==> ips_leave.....LED(0x00028080)... [ 680.057523] survey done event(4) [ 680.732663] ==>pwr_state_check_handler .fw_state(8) [ 680.732715] ==> rtw_ps_cmd , enqueue CMD [ 680.732823] ==>rtw_ps_processor .fw_state(8) [ 680.732853] ==>ips_enter cnts:7 [ 680.733036] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00028000).... [ 680.733076] ===> rtw_ips_pwr_down................... [ 680.733272] ====> rtw_ips_dev_unload... [ 680.761490] usb_read_port_cancel [ 680.761733] usb_write_port_cancel [ 680.762055] ==> rtl8192cu_hal_deinit [ 680.762087] bkeepfwalive(0) [ 680.762110] card disble without HWSM........... [ 680.769809] <=== rtw_ips_pwr_down..................... in 37ms [ 682.874031] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 692.905560] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 702.937329] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 712.969063] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 723.000743] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 733.032494] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 743.064489] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 753.096227] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 763.127574] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 773.159687] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 783.191331] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 793.222691] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 803.254491] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 813.286130] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 823.317820] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 833.349568] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 843.381284] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 853.412961] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 863.444683] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 873.476414] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 883.508129] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 893.539798] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 903.571493] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 913.603190] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 923.634892] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 933.666550] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 943.698274] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 953.729963] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 963.761656] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 973.793362] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 980.093985] rfpwrstate_check call ips_leave.... [ 980.094046] ==>ips_leave cnts:7 [ 980.094069] ===> rtw_ips_pwr_up.............. [ 980.094105] ===> ips_netdrv_open......... [ 980.105442] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC [ 980.105487] FirmwareDownload92C accquire FW from embedded image [ 980.105521] fw_ver=v80, fw_subver=0, sig=0x88c0 [ 980.156586] fw download ok! [ 980.156628] Set RF Chip ID to RF_6052 and RF type to 1T1R. [ 980.568680] IQK:Start!!! [ 980.587238] Path A IQK Success!! [ 980.602953] Path A IQK Success!! [ 980.612662] IQK: final_candidate is 0 [ 980.612715] IQK: RegE94=105 RegE9C=13 RegEA4=ff RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0 Path A IQ Calibration Success ! [ 980.728884] pdmpriv->TxPowerTrackControl = 1 [ 980.739308] MAC Address from REG_MACID = 80:1f:02:ab:a5:a6 [ 980.739351] rtl8192cu_hal_init in 644ms [ 980.739548] <=== rtw_ips_pwr_up.............. in 644ms [ 980.739685] ==> ips_leave.....LED(0x00028080)... [ 982.069622] survey done event(a) [ 982.746370] ==>pwr_state_check_handler .fw_state(8) [ 982.746423] ==> rtw_ps_cmd , enqueue CMD [ 982.746531] ==>rtw_ps_processor .fw_state(8) [ 982.746562] ==>ips_enter cnts:8 [ 982.746697] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00028000).... [ 982.746733] ===> rtw_ips_pwr_down................... [ 982.747002] ====> rtw_ips_dev_unload... [ 982.774201] usb_read_port_cancel [ 982.783800] usb_write_port_cancel [ 982.784017] ==> rtl8192cu_hal_deinit [ 982.784044] bkeepfwalive(0) [ 982.784067] card disble without HWSM........... [ 982.793378] <=== rtw_ips_pwr_down..................... in 46ms [ 983.825057] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 993.856724] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 1003.888456] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 1013.920129] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 1023.951827] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 1033.983567] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 1044.015224] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 1054.046855] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 1064.078578] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 1074.110285] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 1084.141956] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 1094.173680] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 1104.205369] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 1114.237131] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 1124.268786] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2 [ 1134.300471] [drm:output_poll_execute], [CONNECTOR:5:HDMI-A-1] status updated from 2 to 2