U-Boot SPL 2017.03-rc2-00002-g11d4fd24f9 (Feb 15 2017 - 16:42:40) Trying to boot from MMC2 U-Boot 2017.03-rc2-00002-g11d4fd24f9 (Feb 15 2017 - 16:42:40 -0600), Build: jenkins-github_Bootloader-Builder-520 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment Model: BeagleBone Blue not set. Validating first E-fuse MAC BeagleBone Black: Model: BeagleBoard.org BeagleBone Blue: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE Could not get PHY for cpsw: addr 0 cpsw Press SPACE to abort autoboot in 2 seconds board_name=[BBBL] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Bad device 0:2 0x82000000 ** ** Bad device 0:2 0x82000000 ** switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... reading uEnv.txt 33 bytes read in 3 ms (10.7 KiB/s) gpio: pin 55 (gpio 55) value is 1 Loaded environment from /uEnv.txt Importing environment from mmc ... Checking if uenvcmd is set ... Checking if client_ip is set ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 33 bytes read in 27 ms (1000 Bytes/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... ** Invalid partition 3 ** ** Invalid partition 4 ** ** Invalid partition 5 ** ** Invalid partition 6 ** ** Invalid partition 7 ** switch to partitions #0, OK mmc1(part 0) is current device Scanning mmc 1:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc1(part 0) is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 1970 bytes read in 17 ms (112.3 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.4.49-ti-r89 ... 8651944 bytes read in 563 ms (14.7 MiB/s) loading /boot/dtbs/4.4.49-ti-r89/am335x-boneblue.dtb ... 136043 bytes read in 55 ms (2.4 MiB/s) uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to enable... loading /boot/initrd.img-4.4.49-ti-r89 ... 5239210 bytes read in 355 ms (14.1 MiB/s) debug: [console=ttyO0,115200n8 run_hardware_tests quiet root=UUID=2c34d588-adb2-49c5-bfec-1717bb555650 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet cape_universal=enable] ... debug: [bootz 0x82000000 0x88080000:4ff1aa 0x88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fb00000, end 8ffff1aa ... OK Loading Device Tree to 8fadb000, end 8faff36a ... OK Starting kernel ... [ 0.002360] clocksource_probe: no matching clocksources found [ 2.116059] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 2.370033] omap_voltage_late_init: Voltage driver support not added [ 2.378139] PM: Cannot get wkup_m3_ipc handle Loading, please wait... [ 5.381164] remoteproc1: failed to load am335x-pru0-fw [ 5.419812] remoteproc1: request_firmware failed: -2 [ 5.425017] pru-rproc 4a334000.pru0: rproc_boot failed [ 5.517545] remoteproc1: failed to load am335x-pru1-fw [ 5.533027] remoteproc1: request_firmware failed: -2 [ 5.538257] pru-rproc 4a338000.pru1: rproc_boot failed rootfs: recovering journal rootfs: clean, 84415/233392 files, 414248/932864 blocks Debian GNU/Linux 8 beaglebone ttyS0 BeagleBoard.org Debian Image 2017-02-19 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] beaglebone login: debian Password: Linux beaglebone 4.4.49-ti-r89 #1 SMP Fri Feb 17 20:59:06 UTC 2017 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. debian@beaglebone:~$ cat /etc/issue Debian GNU/Linux 8 \n \l BeagleBoard.org Debian Image 2017-02-19 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] debian@beaglebone:~$ uname -a Linux beaglebone 4.4.49-ti-r89 #1 SMP Fri Feb 17 20:59:06 UTC 2017 armv7l GNU/Linux debian@beaglebone:~$