Texas Instruments X-Loader 1.5.1 (Jul 15 2011 - 21:29:14) Beagle xM Reading boot sector Loading u-boot.bin from mmc U-Boot 2011.09-rc2 (Oct 06 2011 - 17:47:10) OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB WARNING: Caches not enabled NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Beagle xM Rev C No EEPROM on expansion board Die ID #6b0600029ff800000160a7450700901b Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 The user button is currently NOT pressed. SD/MMC found on device 0 reading uEnv.txt ** Unable to read "uEnv.txt" from mmc 0:1 ** reading boot.scr 378 bytes read Loaded script from boot.scr Running bootscript from mmc0 ... ## Executing script at 80200000 reading uImage 3741340 bytes read reading uInitrd 5843050 bytes read ## Booting kernel from Legacy Image at 80000000 ... Image Name: Ubuntu Kernel Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3741276 Bytes = 3.6 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: Ubuntu Initrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 5842986 Bytes = 5.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. fsck from util-linux 2.19.1 [ 14.204101] hub 1-0:1.0: unable to enumerate USB device on port 2 /dev/mmcblk0p2: clean, 28782/482304 files, 1533809/3855360 blocks * Stopping Mount filesystems on boot[ OK ] Waiting for network configuration... * Stopping cold plug devices[ OK ] * Stopping log initial device creation[ OK ] * Starting enable remaining boot-time encrypted block devices[ OK ] * Starting configure virtual network devices[ OK ] * Starting configure network device security[ OK ] * Starting save udev log and update rules[ OK ] * Stopping save udev log and update rules[ OK ] * Stopping enable remaining boot-time encrypted block devices[ OK ] * Stopping configure virtual network devices[ OK ] * Stopping Read required files in advance[ OK ] Waiting up to 60 more seconds for network configuration... Booting system without full network configuration... * Stopping Failsafe Boot Delay[ OK ] * Starting System V initialisation compatibility[ OK ] * Starting AppArmor profiles [ OK ] * Stopping System V initialisation compatibility[ OK ] * Starting System V runlevel compatibility[ OK ] * Starting eCryptfs[ OK ] * Starting save kernel messages[ OK ] * Starting regular background program processing daemon[ OK ] * Starting deferred execution scheduler[ OK ] * Starting CPU interrupts balancing daemon[ OK ] * Stopping eCryptfs[ OK ] * Stopping System V runlevel compatibility[ OK ] Ubuntu 11.10 rebehost ttyO2 rebehost login: *** Password: *** Last login: Wed Oct 12 17:48:10 CEST 2011 on ttyO2 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-omap armv7l) * Documentation: https://help.ubuntu.com/ pablo@rebehost:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-12-omap (buildd@celbalrai) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu Fri Oct 7 14:58:13 UTC 2011 (Ubuntu 3.0.0-12.20-omap 3.0.4) [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP3 Beagle Board [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk ) [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000 [ 0.000000] On node 0 totalpages: 128000 [ 0.000000] free_area_init_node: node 0, pgdat c07bdb44, node_mem_map c087900 0 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 126976 pages, LIFO batch:31 [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] Reprogramming SDRC clock to 332000000 Hz [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 126976 [ 0.000000] Kernel command line: ro elevator=noop vram=12M omapfb.mode=dvi:12 80x720MR-16@60 mpurate=800 root=UUID=9822c3c2-8c1c-4b8c-9a1a-829adf2d6284 fixrtc quiet splash console=ttyO2,115200n8 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] allocated 2097152 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memor y cgroups [ 0.000000] Memory: 500MB = 500MB total [ 0.000000] Memory: 491032k/491032k available, 33256k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0048000 ( 256 kB) [ 0.000000] .text : 0xc0048000 - 0xc0762fe8 (7276 kB) [ 0.000000] .data : 0xc0764000 - 0xc07bfa50 ( 367 kB) [ 0.000000] .bss : 0xc07bfa74 - 0xc08785e8 ( 739 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, N odes=1 [ 0.000000] NR_IRQS:410 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupt s [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck. [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 13 1071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000152] Calibrating delay loop... 503.12 BogoMIPS (lpj=1966080) [ 0.032897] pid_max: default: 32768 minimum: 301 [ 0.033111] Security Framework initialized [ 0.033142] AppArmor: AppArmor initialized [ 0.033172] Yama: becoming mindful. [ 0.033447] Mount-cache hash table entries: 512 [ 0.033874] Initializing cgroup subsys cpuacct [ 0.033935] Initializing cgroup subsys memory [ 0.033966] Initializing cgroup subsys devices [ 0.033996] Initializing cgroup subsys freezer [ 0.033996] Initializing cgroup subsys net_cls [ 0.033996] Initializing cgroup subsys blkio [ 0.034027] Initializing cgroup subsys perf_event [ 0.034149] CPU: Testing write buffer coherency: ok [ 0.034423] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counter s available [ 0.035308] devtmpfs: initialized [ 0.036621] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core [ 0.036651] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per [ 0.036651] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup [ 0.049652] omap_hwmod: i2c1: softreset failed (waited 10000 usec) [ 0.061492] omap_hwmod: i2c2: softreset failed (waited 10000 usec) [ 0.073333] omap_hwmod: i2c3: softreset failed (waited 10000 usec) [ 0.074768] print_constraints: dummy: [ 0.075012] NET: Registered protocol family 16 [ 0.075195] GPMC revision 5.0 [ 0.076141] omap_device: omap_gpio.0: new worst case activate latency 0: 3051 7 [ 0.076293] OMAP GPIO hardware version 2.5 [ 0.076477] OMAP GPIO hardware version 2.5 [ 0.076629] OMAP GPIO hardware version 2.5 [ 0.076782] OMAP GPIO hardware version 2.5 [ 0.076934] OMAP GPIO hardware version 2.5 [ 0.077087] OMAP GPIO hardware version 2.5 [ 0.077575] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.078887] OMAP3 Beagle Rev: xM C [ 0.080322] omap_device: omap_uart.1: new worst case activate latency 0: 3051 7 [ 0.083099] Found NAND on CS0 [ 0.083129] Registering NAND on CS0 [ 0.083496] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.124847] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/800 MH z [ 0.125000] OMAP DMA hardware revision 5.0 [ 0.129364] bio: create slab at 0 [ 0.131530] SCSI subsystem initialized [ 0.131744] libata version 3.00 loaded. [ 0.132019] usbcore: registered new interface driver usbfs [ 0.132080] usbcore: registered new interface driver hub [ 0.132202] usbcore: registered new device driver usb [ 0.144470] omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz [ 0.146850] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 0.146881] twl4030: power (irq 373) chaining IRQs 376..383 [ 0.147247] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 0.149291] print_constraints: VUSB1V5: 1500 mV normal standby [ 0.149627] print_constraints: VUSB1V8: 1800 mV normal standby [ 0.149932] print_constraints: VUSB3V1: 3100 mV normal standby [ 0.153259] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 0.153869] print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal sta ndby [ 0.154235] print_constraints: VDAC: 1800 mV normal standby [ 0.154541] print_constraints: VPLL2: 1800 mV normal standby [ 0.154937] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal stan dby [ 0.155090] omap_device: omap_i2c.1: new worst case deactivate latency 0: 305 17 [ 0.155212] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz [ 0.155975] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.156463] NetLabel: Initializing [ 0.156463] NetLabel: domain hash size = 128 [ 0.156494] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.156555] NetLabel: unlabeled traffic allowed by default [ 0.156860] Switching to clocksource 32k_counter [ 0.157745] Switched to NOHz mode on CPU #0 [ 0.164978] AppArmor: AppArmor Filesystem Enabled [ 0.173065] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host) [ 0.173217] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.173248] musb-hdrc: MHDRC RTL version 1.800 [ 0.173248] musb-hdrc: setup fifo_mode 4 [ 0.173278] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 0.173431] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DM A, IRQ 92 [ 0.173919] NET: Registered protocol family 2 [ 0.174133] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.174743] TCP established hash table entries: 16384 (order: 5, 131072 bytes ) [ 0.175018] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 0.175170] TCP: Hash tables configured (established 16384 bind 16384) [ 0.175201] TCP reno registered [ 0.175201] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.175231] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.175537] NET: Registered protocol family 1 [ 0.175598] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.175842] Trying to unpack rootfs image as initramfs... [ 0.181213] PMU: registered new PMU device of type 0 [ 0.181823] audit: initializing netlink socket (disabled) [ 0.181884] type=2000 audit(0.203:1): initialized [ 0.311584] omap_device: omap_i2c.1: new worst case activate latency 0: 30517 [ 0.360687] VFS: Disk quotas dquot_6.5.2 [ 0.360931] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.368316] fuse init (API version 7.16) [ 0.368927] msgmni has been set to 959 [ 0.377227] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 53) [ 0.377380] io scheduler noop registered (default) [ 0.377410] io scheduler deadline registered [ 0.377502] io scheduler cfq registered [ 0.439086] OMAP DSS rev 2.0 [ 0.447937] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.452972] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 0.453216] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 0.453460] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 0.453613] console [ttyO2] enabled [ 0.453826] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3 [ 0.467926] brd: module loaded [ 0.479034] loop: module loaded [ 0.480682] omap2-nand driver initializing [ 0.481018] No NAND device found. [ 0.481262] No NAND device found. [ 0.482818] Fixed MDIO Bus: probed [ 0.482971] PPP generic driver version 2.4.2 [ 0.483245] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) ( 6 bit encapsulation enabled). [ 0.483245] CSLIP: code copyright 1989 Regents of the University of Californi a. [ 0.483276] SLIP linefill/keepalive option. [ 0.483337] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.492889] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 2.501892] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numbe r 1 [ 2.502014] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 [ 2.516784] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 2.517517] hub 1-0:1.0: USB hub found [ 2.517578] hub 1-0:1.0: 3 ports detected [ 2.548156] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.548309] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller [ 2.548370] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus num ber 2 [ 2.548431] ohci-omap3 ohci-omap3.0: irq 76, io mem 0x48064400 [ 2.634613] hub 2-0:1.0: USB hub found [ 2.634643] hub 2-0:1.0: 3 ports detected [ 2.635437] mousedev: PS/2 mouse device common for all mice [ 2.643859] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 2.645263] device-mapper: uevent: version 1.0.3 [ 2.645721] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-d evel@redhat.com [ 2.645782] cpuidle: using governor ladder [ 2.645782] cpuidle: using governor menu [ 2.645843] sdhci: Secure Digital Host Controller Interface driver [ 2.645843] sdhci: Copyright(c) Pierre Ossman [ 2.760406] OMAP3 Beagle/Devkit8000 SoC init [ 2.790161] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2.860839] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok [ 2.861541] ALSA device list: [ 2.861572] #0: omap3beagle [ 2.862487] TCP cubic registered [ 2.863403] NET: Registered protocol family 10 [ 2.865173] NET: Registered protocol family 17 [ 2.865386] Registering the dns_resolver key type [ 2.865478] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 2.874084] Freeing initrd memory: 5704K [ 2.874603] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 2.874633] omap2_set_init_voltage: Unable to put vdd_mpu to its init voltage [ 2.874633] [ 2.875579] clock: disabling unused clocks to save power [ 2.876525] registered taskstats version 1 [ 2.876739] fbcvt: 1280x720@60: CVT Name - .921M9-R [ 2.896423] Console: switching to colour frame buffer device 160x45 [ 2.907226] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 2.908721] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:20:10 UTC (946686010) [ 2.909149] Freeing init memory: 256K [ 3.016540] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 3.038787] udevd[63]: starting version 173 [ 3.175842] mmc0: host does not support reading read-only switch. assuming wr ite-enable. [ 3.175964] mmc0: new SDHC card at address b368 [ 3.180084] mmcblk0: mmc0:b368 00000 3.74 GiB [ 3.182891] mmcblk0: p1 p2 [ 3.235290] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 3.454010] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 3.672821] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 3.891510] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 4.110321] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 4.329071] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 4.547821] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 4.766448] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 4.888366] Btrfs loaded [ 5.016601] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 5.129272] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesyst em [ 5.129272] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 5.235290] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 5.453918] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 5.672546] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 5.891510] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 6.110198] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 6.328979] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 6.547698] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 6.766510] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 6.985290] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 7.203918] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 7.422576] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 7.641510] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 7.860229] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 8.079040] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 8.297729] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 8.516510] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 8.735260] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 8.953979] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 9.172637] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 9.391510] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 9.610260] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 9.829010] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 10.047790] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 10.266510] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 10.485076] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 10.704010] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 10.922637] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 11.141540] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 11.207183] EXT4-fs (mmcblk0p2): recovery complete [ 11.360260] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 11.578887] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 11.797729] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 11.984619] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null) [ 12.016601] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 12.235321] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 12.454193] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 12.672851] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 12.891601] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 13.110290] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 13.329010] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 13.547607] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 13.766571] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 13.985321] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 14.177368] udevd[278]: starting version 173 [ 14.204101] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 14.683166] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 14.694000] Registered led device: beagleboard::usr0 [ 14.694274] Registered led device: beagleboard::usr1 [ 14.698608] Registered led device: beagleboard::pmu_stat [ 14.792114] omap_device: omap2_mcspi.1: new worst case activate latency 0: 30 517 [ 14.796539] omap_device: omap2_mcspi.3: new worst case deactivate latency 0: 61035 [ 14.961425] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c -1/1-0049/twl4030_pwrbutton/input/input1 [ 15.118713] omap_device: omap_wdt.-1: new worst case activate latency 0: 3051 7 [ 15.141601] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 16.653228] type=1400 audit(1318434269.552:2): apparmor="STATUS" operation="p rofile_load" name="/sbin/dhclient" pid=374 comm="apparmor_parser" [ 16.660766] type=1400 audit(1318434269.560:3): apparmor="STATUS" operation="p rofile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=374 comm=" apparmor_parser" [ 16.667266] type=1400 audit(1318434269.568:4): apparmor="STATUS" operation="p rofile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=374 comm="appar mor_parser" [ 17.077880] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 32.142578] Adding 524240k swap on /SWAP.swap. Priority:-1 extents:11 across :571384k SS [ 140.174835] type=1400 audit(1318434393.076:5): apparmor="STATUS" operation="p rofile_replace" name="/sbin/dhclient" pid=523 comm="apparmor_parser" [ 140.176605] type=1400 audit(1318434393.076:6): apparmor="STATUS" operation="p rofile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=523 com m="apparmor_parser" [ 140.177703] type=1400 audit(1318434393.076:7): apparmor="STATUS" operation="p rofile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=523 comm="ap parmor_parser" [ 140.213134] type=1400 audit(1318434393.115:8): apparmor="STATUS" operation="p rofile_load" name="/usr/sbin/tcpdump" pid=524 comm="apparmor_parser" pablo@rebehost:~$