[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13-bone64 (rengglian@rengglian-VirtualBox) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sat Aug 23 17:58:55 CEST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c0882780, node_mem_map c08ff000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (l2cache sgx neon )
[    0.000000] PERCPU: Embedded 9 pages/cpu @c0b0e000 s14080 r8192 d14592 u36864
[    0.000000] pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 capemgr.disable_portno=BB-BONELT-HDMI,BB-BONELT-HDMIN capemgr.enable_partno=BB-VIEW-LCD-01 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 249020k/249020k available, 13124k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07bedd0   (7900 kB)
[    0.000000]       .init : 0xc07bf000 - 0xc07fc700   ( 246 kB)
[    0.000000]       .data : 0xc07fe000 - 0xc0885740   ( 542 kB)
[    0.000000]        .bss : 0xc0885740 - 0xc08feec0   ( 486 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:0 nr_irqs:0 0
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000304] Calibrating delay loop... 715.96 BogoMIPS (lpj=698368)
[    0.011583] pid_max: default: 32768 minimum: 301
[    0.011764] Security Framework initialized
[    0.011838] Mount-cache hash table entries: 512
[    0.019431] Initializing cgroup subsys cpuacct
[    0.019457] Initializing cgroup subsys memory
[    0.019510] Initializing cgroup subsys blkio
[    0.019627] CPU: Testing write buffer coherency: ok
[    0.020095] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.020164] Setting up static identity map for 0x804a3bf8 - 0x804a3c44
[    0.021454] Brought up 1 CPUs
[    0.021473] SMP: Total of 1 processors activated (715.96 BogoMIPS).
[    0.022409] devtmpfs: initialized
[    0.032907] omap_hwmod: wd_timer2: _wait_target_disable failed
[    0.086605] pinctrl core: initialized pinctrl subsystem
[    0.086783] rstctl core: initialized rstctl subsystem
[    0.087160] regulator-dummy: no parameters
[    0.087585] NET: Registered protocol family 16
[    0.088431] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.096154] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.096903] platform 49000000.edma: alias fck already exists
[    0.096927] platform 49000000.edma: alias fck already exists
[    0.096945] platform 49000000.edma: alias fck already exists
[    0.097807] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.097935] OMAP GPIO hardware version 0.1
[    0.098971] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.099923] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.100852] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.105374] No ATAGs?
[    0.105394] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.107047] cpsw.0: No hwaddr in dt. Using d4:94:a1:38:2a:24 from efuse
[    0.107071] cpsw.1: No hwaddr in dt. Using d4:94:a1:38:2a:25 from efuse
[    0.118362] bio: create slab <bio-0> at 0
[    0.126979] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.127169] of_get_named_gpio_flags: can't parse gpios property
[    0.127333] vmmcsd_fixed: 3300 mV 
[    0.129428] SCSI subsystem initialized
[    0.129741] usbcore: registered new interface driver usbfs
[    0.129823] usbcore: registered new interface driver hub
[    0.130081] usbcore: registered new device driver usb
[    0.131726] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    0.132985] input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0
[    0.134843] DCDC1: at 1800 mV 
[    0.135805] vdd_mpu: 925 <--> 1325 mV at 1275 mV 
[    0.136796] vdd_core: 925 <--> 1150 mV at 1125 mV 
[    0.137739] LDO1: at 1800 mV 
[    0.138656] LDO2: at 3300 mV 
[    0.139570] LDO3: 1800 <--> 3300 mV at 3300 mV 
[    0.140533] LDO4: at 3300 mV 
[    0.141384] tps65217 0-0024: TPS65217 ID 0x7 version 1.0
[    0.141954] omap_i2c 44e0b000.i2c: unable to select pin group
[    0.142608] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[    0.144424] omap_i2c 4819c000.i2c: unable to select pin group
[    0.144613] media: Linux media interface: v0.10
[    0.144702] Linux video capture interface: v2.00
[    0.144810] pps_core: LinuxPPS API ver. 1 registered
[    0.144821] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.145351] Advanced Linux Sound Architecture Driver Initialized.
[    0.146117] NetLabel: Initializing
[    0.146131] NetLabel:  domain hash size = 128
[    0.146139] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.146227] NetLabel:  unlabeled traffic allowed by default
[    0.146588] Switching to clocksource gp_timer
[    0.188918] NET: Registered protocol family 2
[    0.189821] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.189892] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.189963] TCP: Hash tables configured (established 2048 bind 2048)
[    0.190045] TCP: reno registered
[    0.190063] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.190097] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.190407] NET: Registered protocol family 1
[    0.190908] RPC: Registered named UNIX socket transport module.
[    0.190925] RPC: Registered udp transport module.
[    0.190934] RPC: Registered tcp transport module.
[    0.190944] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.191732] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    0.192054] CPU PMU: attempt to register multiple PMU devices!
[    0.192083] arm-pmu: probe of arm-pmu failed with error -28
[    0.192432] omap2_mbox_probe: platform not supported
[    0.400339] VFS: Disk quotas dquot_6.5.2
[    0.400522] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.401608] NFS: Registering the id_resolver key type
[    0.401693] Key type id_resolver registered
[    0.401706] Key type id_legacy registered
[    0.402067] fuse init (API version 7.20)
[    0.402677] Btrfs loaded
[    0.402810] msgmni has been set to 486
[    0.404999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.405021] io scheduler noop registered
[    0.405033] io scheduler deadline registered
[    0.405061] io scheduler cfq registered (default)
[    0.406670] tps65217-bl tps65217-bl: no platform data provided
[    0.406704] tps65217-bl: probe of tps65217-bl failed with error -22
[    0.407402] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.409368] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    0.409618] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
[    1.162367] console [ttyO0] enabled
[    1.166898] [drm] Initialized drm 1.1.0 20060810
[    1.181667] brd: module loaded
[    1.189982] loop: module loaded
[    1.193401] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.200665] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.207908] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.215150] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.222390] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.236521] bone-capemgr bone_capemgr.8: Baseboard: 'A335BONE,00A3,5011BB001036'
[    1.244284] bone-capemgr bone_capemgr.8: compatible-baseboard=ti,beaglebone
[    1.251737] omap_i2c 4819c000.i2c: Arbitration lost
[    2.267774] omap_i2c 4819c000.i2c: timeout waiting for bus ready
[    3.281440] omap_i2c 4819c000.i2c: timeout waiting for bus ready
[    3.291210] bone-capemgr bone_capemgr.8: slot #0: No cape found
[    4.300974] omap_i2c 4819c000.i2c: timeout waiting for bus ready
[    5.314643] omap_i2c 4819c000.i2c: timeout waiting for bus ready
[    5.324413] bone-capemgr bone_capemgr.8: slot #1: No cape found
[    6.334176] omap_i2c 4819c000.i2c: timeout waiting for bus ready
[    7.347846] omap_i2c 4819c000.i2c: timeout waiting for bus ready
[    7.357615] bone-capemgr bone_capemgr.8: slot #2: No cape found
[    8.367379] omap_i2c 4819c000.i2c: timeout waiting for bus ready
[    9.381049] omap_i2c 4819c000.i2c: timeout waiting for bus ready
[    9.390819] bone-capemgr bone_capemgr.8: slot #3: No cape found
[    9.397071] bone-capemgr bone_capemgr.8: enabled_partno part_number 'BB-VIEW-LCD-01', version 'N/A', prio '0'
[    9.407445] bone-capemgr bone_capemgr.8: slot #4: generic override
[    9.413922] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 4
[    9.421940] bone-capemgr bone_capemgr.8: slot #4: 'Override Board Name,00A0,Override Manuf,BB-VIEW-LCD-01'
[    9.432389] bone-capemgr bone_capemgr.8: initialized OK.
[    9.437990] bone-capemgr bone_capemgr.8: loader: before slot-4 BB-VIEW-LCD-01:00A0 (prio 0)
[    9.446735] bone-capemgr bone_capemgr.8: loader: check slot-4 BB-VIEW-LCD-01:00A0 (prio 0)
[    9.457380] OneNAND driver initializing
[    9.462566] usbcore: registered new interface driver cdc_ether
[    9.468768] usbcore: registered new interface driver rndis_host
[    9.475039] bone-capemgr bone_capemgr.8: loader: after slot-4 BB-VIEW-LCD-01:00A0 (prio 0)
[    9.483780] usbcore: registered new interface driver cdc_ncm
[    9.489731] bone-capemgr bone_capemgr.8: slot #4: Requesting part number/version based 'BB-VIEW-LCD-01-00A0.dtbo
[    9.500972] usbcore: registered new interface driver cdc_acm
[    9.506919] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    9.515289] Initializing USB Mass Storage driver...
[    9.520417] bone-capemgr bone_capemgr.8: slot #4: Requesting firmware 'BB-VIEW-LCD-01-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[    9.534519] usbcore: registered new interface driver usb-storage
[    9.540813] USB Mass Storage support registered.
[    9.546078] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    9.552763] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    9.558014] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    9.566791] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    9.566805] musb-hdrc: MHDRC RTL version 2.0 
[    9.566816] musb-hdrc: setup fifo_mode 4
[    9.566837] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    9.566954] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    9.571998] musb-hdrc musb-hdrc.0.auto: *** power=250
[    9.577850] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    9.583083] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    9.591837] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    9.591851] musb-hdrc: MHDRC RTL version 2.0 
[    9.591860] musb-hdrc: setup fifo_mode 4
[    9.591876] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    9.591996] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    9.597019] musb-hdrc musb-hdrc.1.auto: *** power=250
[    9.602313] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    9.608603] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    9.616829] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    9.616920] usb usb1: default language 0x0409
[    9.616961] usb usb1: udev 1, busnum 1, minor = 0
[    9.616977] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    9.624091] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.631652] usb usb1: Product: MUSB HDRC host driver
[    9.636854] usb usb1: Manufacturer: Linux 3.8.13-bone64 musb-hcd
[    9.643143] usb usb1: SerialNumber: musb-hdrc.1.auto
[    9.648969] usb usb1: usb_probe_device
[    9.648990] usb usb1: configuration #1 chosen from 1 choice
[    9.649044] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    9.649182] hub 1-0:1.0: usb_probe_interface
[    9.649198] hub 1-0:1.0: usb_probe_interface - got id
[    9.649219] hub 1-0:1.0: USB hub found
[    9.653215] hub 1-0:1.0: 1 port detected
[    9.657340] hub 1-0:1.0: standalone hub
[    9.657354] hub 1-0:1.0: individual port power switching
[    9.657366] hub 1-0:1.0: no over-current protection
[    9.657378] hub 1-0:1.0: Single TT
[    9.657392] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    9.657405] hub 1-0:1.0: power on to power good time: 10ms
[    9.657434] hub 1-0:1.0: local power source is good
[    9.657533] hub 1-0:1.0: enabling power on all ports
[    9.658302] mousedev: PS/2 mouse device common for all mice
[    9.666084] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    9.673771] i2c /dev entries driver
[    9.678742] pps_ldisc: PPS line discipline registered
[    9.684160] Driver for 1-wire Dallas network protocol.
[    9.690968] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    9.698711] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    9.707632] cpuidle: using governor ladder
[    9.711971] cpuidle: using governor menu
[    9.716411] of_get_named_gpio_flags exited with status 6
[    9.716425] of_get_named_gpio_flags: can't parse gpios property
[    9.716436] of_get_named_gpio_flags: can't parse gpios property
[    9.716462] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    9.723674] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    9.730410] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    9.737589] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    9.745178] mmc.4 supply vmmc_aux not found, using dummy regulator
[    9.753249] omap_hsmmc mmc.4: pins are not configured from the driver
[    9.760156] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    9.760211] hub 1-0:1.0: hub_suspend
[    9.760243] usb usb1: bus auto-suspend, wakeup 1
[    9.787813] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7
[    9.799525] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
[    9.806816] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[    9.815780] leds-gpio gpio-leds.7: pins are not configured from the driver
[    9.823008] of_get_named_gpio_flags exited with status 53
[    9.823025] of_get_named_gpio_flags exited with status 54
[    9.823039] of_get_named_gpio_flags exited with status 55
[    9.823053] of_get_named_gpio_flags exited with status 56
[    9.823069] of_get_named_gpio_flags exited with status 53
[    9.823300] of_get_named_gpio_flags exited with status 54
[    9.823452] of_get_named_gpio_flags exited with status 55
[    9.823584] of_get_named_gpio_flags exited with status 56
[    9.823989] ledtrig-cpu: registered to indicate activity on CPUs
[    9.830700] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    9.837917] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    9.845733] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    9.851993] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    9.859163] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    9.870207] usbcore: registered new interface driver usbhid
[    9.876089] usbhid: USB HID core driver
[    9.881333] ashmem: initialized
[    9.885093] logger: created 256K log 'log_main'
[    9.890141] logger: created 256K log 'log_events'
[    9.895384] logger: created 256K log 'log_radio'
[    9.900474] logger: created 256K log 'log_system'
[    9.907832] TCP: cubic registered
[    9.911528] NET: Registered protocol family 10
[    9.917369] NET: Registered protocol family 17
[    9.922401] Key type dns_resolver registered
[    9.927182] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    9.935300] ThumbEE CPU extension supported.
[    9.939823] Registering SWP/SWPB emulation handler
[    9.945770] registered taskstats version 1
[    9.967817] mmc0: host does not support reading read-only switch. assuming write-enable.
[    9.978877] mmc0: new high speed SDHC card at address 1234
[    9.985247] mmcblk0: mmc0:1234 SA04G 3.63 GiB 
[    9.992305]  mmcblk0: p1 p2
[   10.000221] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[   10.006642] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[   10.014573] libphy: 4a101000.mdio: probed
[   10.018849] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[   10.028622] Detected MACID = d4:94:a1:38:2a:24
[   10.033253] cpsw 4a100000.ethernet: NAPI disabled
[   10.039931] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[   10.055250] ALSA device list:
[   10.058413]   No soundcards found.
[   10.066966] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[   10.074664] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[   13.350395] EXT4-fs (mmcblk0p2): recovery complete
[   14.040033] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   14.048844] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[   14.057952] devtmpfs: mounted
[   14.061477] Freeing init memory: 244K
[   15.077381] udevd[191]: starting version 175
[   15.579075] bone-capemgr bone_capemgr.8: failed to load firmware 'BB-VIEW-LCD-01-00A0.dtbo'
[   15.587943] bone-capemgr bone_capemgr.8: loader: failed to load slot-4 BB-VIEW-LCD-01:00A0 (prio 0)
[   15.963764] omap_rng 48310000.rng: base address of priv is -97452032
[   16.025841] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[   18.324756] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   18.574583] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[   24.539323] net eth0: initializing cpsw version 1.12 (0)
[   24.547171] net eth0: phy found : id is : 0x7c0f1
[   24.552140] libphy: PHY 4a101000.mdio:01 not found
[   24.557183] net eth0: phy 4a101000.mdio:01 not found on slave 1
[   24.569790] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.625718] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[   27.631744] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  226.858429] bone-capemgr bone_capemgr.8: part_number 'BB-VIEW-LCD7-01', version 'N/A'
[  226.869217] bone-capemgr bone_capemgr.8: slot #5: generic override
[  226.876112] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 5
[  226.884261] bone-capemgr bone_capemgr.8: slot #5: 'Override Board Name,00A0,Override Manuf,BB-VIEW-LCD7-01'
[  226.895044] bone-capemgr bone_capemgr.8: slot #5: Requesting part number/version based 'BB-VIEW-LCD7-01-00A0.dtbo
[  226.905934] bone-capemgr bone_capemgr.8: slot #5: Requesting firmware 'BB-VIEW-LCD7-01-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[  226.959642] bone-capemgr bone_capemgr.8: failed to load firmware 'BB-VIEW-LCD7-01-00A0.dtbo'
[  293.441947] bone-capemgr bone_capemgr.8: part_number 'BB-VIEW-LCD7-01', version 'N/A'
[  293.452261] bone-capemgr bone_capemgr.8: slot #6: generic override
[  293.458980] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 6
[  293.467170] bone-capemgr bone_capemgr.8: slot #6: 'Override Board Name,00A0,Override Manuf,BB-VIEW-LCD7-01'
[  293.478039] bone-capemgr bone_capemgr.8: slot #6: Requesting part number/version based 'BB-VIEW-LCD7-01-00A0.dtbo
[  293.488937] bone-capemgr bone_capemgr.8: slot #6: Requesting firmware 'BB-VIEW-LCD7-01-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[  293.540680] bone-capemgr bone_capemgr.8: failed to load firmware 'BB-VIEW-LCD7-01-00A0.dtbo'
[  303.633683] bone-capemgr bone_capemgr.8: part_number 'BB-VIEW-LCD7-01', version 'N/A'
[  303.644341] bone-capemgr bone_capemgr.8: slot #7: generic override
[  303.651235] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 7
[  303.659377] bone-capemgr bone_capemgr.8: slot #7: 'Override Board Name,00A0,Override Manuf,BB-VIEW-LCD7-01'
[  303.670366] bone-capemgr bone_capemgr.8: slot #7: Requesting part number/version based 'BB-VIEW-LCD7-01-00A0.dtbo
[  303.681251] bone-capemgr bone_capemgr.8: slot #7: Requesting firmware 'BB-VIEW-LCD7-01-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[  303.733408] bone-capemgr bone_capemgr.8: failed to load firmware 'BB-VIEW-LCD7-01-00A0.dtbo'