[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.4-x6 (root@panda-a1-1gb) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #1 SMP Sun Dec 4 17:22:57 UTC 2011 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP3 Beagle Board [ 0.000000] Beagle expansionboard: none [ 0.000000] Beagle second expansionboard: none [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk ) [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000 [ 0.000000] On node 0 totalpages: 126464 [ 0.000000] free_area_init_node: node 0, pgdat c0899440, node_mem_map c0962000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 125440 pages, LIFO batch:31 [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz [ 0.000000] Reprogramming SDRC clock to 400000000 Hz [ 0.000000] dpll3_m2_clk rate change failed: -22 [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0d66000 s11584 r8192 d12992 u32768 [ 0.000000] pcpu-alloc: s11584 r8192 d12992 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125440 [ 0.000000] Kernel command line: console=ttyO2,115200n8 console=tty0 mpurate=auto buddy=none buddy2=none camera=none vram=12M omapfb.mode=dvi:1280x720MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] allocated 2097152 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 494MB = 494MB total [ 0.000000] Memory: 486228k/486228k available, 38060k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07d51b0 (7989 kB) [ 0.000000] .init : 0xc07d6000 - 0xc082fd40 ( 360 kB) [ 0.000000] .data : 0xc0830000 - 0xc089b7e8 ( 430 kB) [ 0.000000] .bss : 0xc089b80c - 0xc09615c8 ( 792 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:410 nr_irqs:410 410 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000885] Calibrating delay loop... 493.67 BogoMIPS (lpj=1929216) [ 0.038818] pid_max: default: 32768 minimum: 301 [ 0.039215] Security Framework initialized [ 0.039306] AppArmor: AppArmor initialized [ 0.039642] Mount-cache hash table entries: 512 [ 0.040832] Initializing cgroup subsys cpuacct [ 0.040954] Initializing cgroup subsys memory [ 0.041015] Initializing cgroup subsys devices [ 0.041046] Initializing cgroup subsys freezer [ 0.041076] Initializing cgroup subsys blkio [ 0.041137] Initializing cgroup subsys perf_event [ 0.041351] CPU: Testing write buffer coherency: ok [ 0.041748] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.042938] Brought up 1 CPUs [ 0.042999] SMP: Total of 1 processors activated (493.67 BogoMIPS). [ 0.044647] devtmpfs: initialized [ 0.052673] print_constraints: dummy: [ 0.053253] NET: Registered protocol family 16 [ 0.053558] GPMC revision 5.0 [ 0.055908] OMAP GPIO hardware version 2.5 [ 0.056060] omap_device: omap_gpio.1: new worst case activate latency 0: 30517 [ 0.058807] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.060150] OMAP3 Beagle Rev: xM Ax/Bx [ 0.063385] omap_device: omap_uart.0: new worst case deactivate latency 0: 30517 [ 0.063903] omap_device: omap_uart.1: new worst case activate latency 0: 30517 [ 0.069274] Found NAND on CS0 [ 0.069335] Registering NAND on CS0 [ 0.069885] gpio_request: gpio--22 (DVI reset) status -22 [ 0.069915] Unable to get DVI reset GPIO [ 0.070037] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.073822] omap_device: omap-mcbsp.2: alias fck already exists [ 0.074218] omap_device: omap-mcbsp.3: alias fck already exists [ 0.076110] OMAP DMA hardware revision 5.0 [ 0.088317] bio: create slab at 0 [ 0.090606] SCSI subsystem initialized [ 0.091156] omap_device: omap2_mcspi.1: new worst case activate latency 0: 30517 [ 0.092864] usbcore: registered new interface driver usbfs [ 0.093139] usbcore: registered new interface driver hub [ 0.093536] usbcore: registered new device driver usb [ 0.094696] omap_device: omap_i2c.1: new worst case activate latency 0: 30517 [ 0.094879] omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz [ 0.098663] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 0.098754] twl4030: power (irq 373) chaining IRQs 376..383 [ 0.099578] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 0.100189] _omap_mux_init_gpio: Could not set gpio192 [ 0.104339] print_constraints: VUSB1V5: 1500 mV normal standby [ 0.105133] print_constraints: VUSB1V8: 1800 mV normal standby [ 0.105895] print_constraints: VUSB3V1: 3100 mV normal standby [ 0.108978] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 0.110717] print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby [ 0.111541] print_constraints: VDAC: 1800 mV normal standby [ 0.112396] print_constraints: VDVI: 1800 mV normal standby [ 0.113311] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby [ 0.113677] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517 [ 0.113983] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz [ 0.114654] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz [ 0.116302] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.117492] NetLabel: Initializing [ 0.117553] NetLabel: domain hash size = 128 [ 0.117584] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.117675] NetLabel: unlabeled traffic allowed by default [ 0.117767] Switching to clocksource 32k_counter [ 0.123046] Switched to NOHz mode on CPU #0 [ 0.139221] AppArmor: AppArmor Filesystem Enabled [ 0.169097] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 0.169342] omap_device: musb-omap2430.-1: new worst case activate latency 0: 30517 [ 0.174224] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.174255] musb-hdrc: MHDRC RTL version 1.800 [ 0.174285] musb-hdrc: setup fifo_mode 5 [ 0.174316] musb-hdrc: 28/31 max ep, 8192/16384 memory [ 0.174835] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 [ 0.175445] NET: Registered protocol family 2 [ 0.175964] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.177337] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.177764] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.178131] TCP: Hash tables configured (established 16384 bind 16384) [ 0.178192] TCP reno registered [ 0.178222] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.178283] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.178833] NET: Registered protocol family 1 [ 0.180114] RPC: Registered named UNIX socket transport module. [ 0.180175] RPC: Registered udp transport module. [ 0.180236] RPC: Registered tcp transport module. [ 0.180267] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.180816] Trying to unpack rootfs image as initramfs... [ 0.624603] Freeing initrd memory: 3424K [ 0.624877] _regulator_get: etb supply vcore not found, using dummy regulator [ 0.625946] _regulator_get: etm supply vcore not found, using dummy regulator [ 0.626403] PMU: registered new PMU device of type 0 [ 0.626586] omap_dsp_init: 600000 bytes @ 9ee00000 [ 0.627838] audit: initializing netlink socket (disabled) [ 0.627960] type=2000 audit(0.648:1): initialized [ 0.856719] VFS: Disk quotas dquot_6.5.2 [ 0.857482] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.868438] fuse init (API version 7.17) [ 0.872436] Btrfs loaded [ 0.872558] msgmni has been set to 956 [ 0.876007] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.876068] io scheduler noop registered [ 0.876098] io scheduler deadline registered [ 0.876403] io scheduler cfq registered (default) [ 0.877532] omap_device: omapdss_dss.-1: new worst case activate latency 0: 30517 [ 0.877624] OMAP DSS rev 2.0 [ 0.877685] omap_device: omapdss_dss.-1: new worst case deactivate latency 0: 30517 [ 0.882019] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.885162] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 0.885833] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 0.886505] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 1.754180] console [ttyO2] enabled [ 1.758605] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3 [ 1.782043] brd: module loaded [ 1.793457] loop: module loaded [ 1.799621] omap2-nand driver initializing [ 1.804382] No NAND device found. [ 1.808197] No NAND device found. [ 1.812042] OneNAND driver initializing [ 1.817443] usbcore: registered new interface driver cdc_ether [ 1.823822] usbcore: registered new interface driver rndis_host [ 1.830169] cdc_ncm: 04-Aug-2011 [ 1.833709] usbcore: registered new interface driver cdc_ncm [ 1.840454] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.847656] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator [ 1.856231] _regulator_get: ehci-omap.0 supply hsusb1 not found, using dummy regulator [ 3.875732] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 3.882476] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 3.890533] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 [ 3.907043] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 3.913269] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.920471] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.928131] usb usb1: Product: OMAP-EHCI Host Controller [ 3.933776] usb usb1: Manufacturer: Linux 3.1.4-x6 ehci_hcd [ 3.939666] usb usb1: SerialNumber: ehci-omap.0 [ 3.945709] hub 1-0:1.0: USB hub found [ 3.949829] hub 1-0:1.0: 3 ports detected [ 3.985260] Initializing USB Mass Storage driver... [ 3.990661] usbcore: registered new interface driver usb-storage [ 3.997070] USB Mass Storage support registered. [ 4.002197] usbcore: registered new interface driver libusual [ 4.008636] udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma) [ 4.015777] gadget: using random self ethernet address [ 4.021392] gadget: using random host ethernet address [ 4.028472] usb0: MAC 12:91:36:44:3b:03 [ 4.032623] usb0: HOST MAC a2:d6:85:0e:1e:c5 [ 4.037170] gadget: Ethernet Gadget, version: Memorial Day 2008 [ 4.043579] gadget: g_ether ready [ 4.051300] musb-hdrc musb-hdrc: MUSB HDRC host driver [ 4.057403] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2 [ 4.065246] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.072479] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.080139] usb usb2: Product: MUSB HDRC host driver [ 4.085357] usb usb2: Manufacturer: Linux 3.1.4-x6 musb-hcd [ 4.091278] usb usb2: SerialNumber: musb-hdrc [ 4.096984] hub 2-0:1.0: USB hub found [ 4.100982] hub 2-0:1.0: 1 port detected [ 4.107055] mousedev: PS/2 mouse device common for all mice [ 4.114135] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0 [ 4.126953] i2c /dev entries driver [ 4.132141] Linux media interface: v0.10 [ 4.136657] lirc_dev: IR Remote Control driver registered, major 249 [ 4.143524] Driver for 1-wire Dallas network protocol. [ 4.149536] omap_device: omap_wdt.-1: new worst case activate latency 0: 30517 [ 4.158142] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 4.164520] omap_device: omap_wdt.-1: new worst case deactivate latency 0: 30517 [ 4.173309] twl4030_wdt twl4030_wdt: Failed to register misc device [ 4.179962] twl4030_wdt: probe of twl4030_wdt failed with error -16 [ 4.187988] device-mapper: uevent: version 1.0.3 [ 4.194488] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com [ 4.204467] device-mapper: multipath: version 1.3.0 loaded [ 4.210266] device-mapper: multipath round-robin: version 1.0.0 loaded [ 4.218750] cpuidle: using governor ladder [ 4.223144] cpuidle: using governor menu [ 4.227416] sdhci: Secure Digital Host Controller Interface driver [ 4.233917] sdhci: Copyright(c) Pierre Ossman [ 4.239746] omap_device: omap_hsmmc.0: new worst case activate latency 0: 213623 [ 4.249176] omap_device: omap_hsmmc.0: new worst case deactivate latency 0: 30517 [ 4.257232] gpio_request: gpio-0 (mmc_wp) status -16 [ 4.257293] omap_hsmmc: probe of omap_hsmmc.1 failed with error -16 [ 4.264282] Registered led device: beagleboard::usr0 [ 4.264465] Registered led device: beagleboard::usr1 [ 4.266510] Registered led device: beagleboard::pmu_stat [ 4.268768] usbcore: registered new interface driver snd-usb-6fire [ 4.277465] OMAP3 Beagle/Devkit8000 SoC init [ 4.354614] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok [ 4.362518] ALSA device list: [ 4.365631] #0: omap3beagle [ 4.369354] oprofile: using arm/armv7 [ 4.374755] TCP cubic registered [ 4.380126] NET: Registered protocol family 10 [ 4.389373] NET: Registered protocol family 17 [ 4.394500] Registering the dns_resolver key type [ 4.399627] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 4.407745] ThumbEE CPU extension supported. [ 4.412261] Registering SWP/SWPB emulation handler [ 4.419067] usb 1-2: new high speed USB device number 2 using ehci-omap [ 4.428253] omap3_idle_init: core off state C7 disabled due to i583 [ 4.435424] sr_init: No PMIC hook to init smartreflex [ 4.441070] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 4.449554] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 4.457916] SmartReflex Class3 initialized [ 4.468200] clock: disabling unused clocks to save power [ 4.475616] registered taskstats version 1 [ 4.480285] fbcvt: 1280x720@60: CVT Name - .921M9-R [ 4.505065] Console: switching to colour frame buffer device 160x45 [ 4.523895] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 4.531707] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 4.539306] Freeing init memory: 356K [ 4.579772] usb 1-2: New USB device found, idVendor=0424, idProduct=9514 [ 4.587158] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.603393] hub 1-2:1.0: USB hub found [ 4.609771] hub 1-2:1.0: 5 ports detected [ 4.817779] mmc0: host does not support reading read-only switch. assuming write-enable. [ 4.836975] mmc0: new SDHC card at address 0002 [ 4.852844] mmcblk0: mmc0:0002 00000 3.70 GiB [ 4.873748] udev[67]: starting version 167 [ 4.881347] mmcblk0: p1 p2 [ 4.915283] usb 1-2.1: new high speed USB device number 3 using ehci-omap [ 5.064178] usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00 [ 5.074432] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.235687] usb 1-2.3: new low speed USB device number 4 using ehci-omap [ 5.404296] usb 1-2.3: New USB device found, idVendor=0461, idProduct=4e22 [ 5.414825] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.425720] usb 1-2.3: Product: USB Optical Mouse [ 5.433898] usb 1-2.3: Manufacturer: PixArt [ 5.743499] usb 1-2.4: new high speed USB device number 5 using ehci-omap [ 5.904541] omap_device: omap_hsmmc.0: new worst case activate latency 0: 244140 [ 5.918762] usb 1-2.4: New USB device found, idVendor=045e, idProduct=0772 [ 5.929290] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.940216] usb 1-2.4: Product: Microsoft® LifeCam Studio(TM) [ 5.949493] usb 1-2.4: Manufacturer: Microsoft [ 6.087249] usb 1-2.5: new low speed USB device number 6 using ehci-omap [ 6.226867] usb 1-2.5: New USB device found, idVendor=413c, idProduct=2003 [ 6.237365] usb 1-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.248138] usb 1-2.5: Product: Dell USB Keyboard [ 6.256164] usb 1-2.5: Manufacturer: Dell [ 6.767120] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 9.341430] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 9.579956] udev[238]: starting version 167 [ 12.013488] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 13.411773] twl_rtc twl_rtc: Power up reset detected. [ 13.426849] twl_rtc twl_rtc: Enabling TWL-RTC. [ 13.501464] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 13.549530] rtc-ds1307: probe of 2-0068 failed with error -5 [ 20.704742] input: PixArt USB Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input2 [ 20.821624] generic-usb 0003:0461:4E22.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ehci-omap.0-2.3/input0 [ 20.928802] Linux video capture interface: v2.00 [ 21.092620] generic-usb 0003:045E:0772.0002: hiddev0,hidraw1: USB HID v1.01 Device [Microsoft Microsoft® LifeCam Studio(TM)] on usb-ehci-omap.0-2.4/input4 [ 21.114074] input: Dell Dell USB Keyboard as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.5/1-2.5:1.0/input/input3 [ 21.336029] generic-usb 0003:413C:2003.0003: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-ehci-omap.0-2.5/input0 [ 21.336212] usbcore: registered new interface driver usbhid [ 21.336212] usbhid: USB HID core driver [ 21.424652] smsc95xx v1.0.4 [ 21.638641] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam Studio(TM) (045e:0772) [ 21.846527] input: Microsoft® LifeCam Studio(TM) as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.4/1-2.4:1.0/input/input4 [ 21.848022] usbcore: registered new interface driver uvcvideo [ 21.848052] USB Video Class driver (1.1.1) [ 22.244781] smsc95xx 1-2.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 86:b4:23:ee:f8:13 [ 22.245056] usbcore: registered new interface driver smsc95xx [ 23.211975] 5:3:1: cannot get freq at ep 0x82 [ 23.278442] usbcore: registered new interface driver snd-usb-audio [ 35.289855] eth0: no IPv6 routers present [ 42.588134] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro,commit=0 [ 43.774688] omap_device: omap_hsmmc.0: new worst case activate latency 0: 549316 [ 1894.893432] usb 1-2.4: USB disconnect, device number 5 [ 1904.730743] omap_device: omap_i2c.1: new worst case activate latency 0: 61035 [ 2029.087097] omap_device: omap_hsmmc.0: new worst case deactivate latency 0: 91552 [ 2063.415069] omap_device: omap-mcbsp.2: new worst case activate latency 0: 30517 [ 2063.416351] omap_device: omap-mcbsp.2: new worst case deactivate latency 0: 30517 [ 2063.446136] omap_device: omap-mcbsp.2: new worst case activate latency 0: 152587 [ 2760.736328] unexport_store: status -22