U-Boot SPL 2017.05-rc2 (May 02 2017 - 08:53:40) Trying to boot from MMC1 ** First descriptor is NOT a primary desc on 1:1 ** *** Warning - bad CRC, using default environment reading u-boot.img reading u-boot.img U-Boot 2017.05-rc2 (May 02 2017 - 08:53:40 +0530) CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 ** First descriptor is NOT a primary desc on 1:1 ** *** Warning - bad CRC, using default environment not set. Validating first E-fuse MAC Net: cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 355 bytes read in 4 ms (85.9 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... Running uenvcmd ... Booting from microSD ... reading uImage 9847360 bytes read in 620 ms (15.1 MiB/s) reading am335x-boneblack.dtb 56827 bytes read in 11 ms (4.9 MiB/s) ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-4.14.108+ Created: 2023-12-26 22:17:13 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 9847296 Bytes = 9.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Kernel Image ... OK Loading Device Tree to 8ffef000, end 8ffffdfa ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.108+ (jura@jura-gl) (gcc version 7.5.0 (Linaro GCC 7.5-2019.12)) #1 SMP PREEMPT Wed Dec 27 00:17:01 EET 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x454 with crng_init=0 [ 0.000000] percpu: Embedded 18 pages/cpu @df928000 s41100 r8192 d24436 u73728 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait earlyprintk mem=512M [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 447772K/522240K available (12288K kernel code, 1067K rwdata, 4132K rodata, 1024K init, 360K bss, 25316K reserved, 49152K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0d00000 (13280 kB) [ 0.000000] .init : 0xc1200000 - 0xc1300000 (1024 kB) [ 0.000000] .data : 0xc1300000 - 0xc140ac10 (1068 kB) [ 0.000000] .bss : 0xc1414ac0 - 0xc146ed40 ( 361 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 40596 entries in 120 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000019] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000040] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000055] OMAP clocksource: timer1 at 24000000 Hz [ 0.000718] timer_probe: no matching timers found [ 0.000939] Console: colour dummy device 80x30 [ 0.000969] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000977] This ensures that you still see kernel messages. Please [ 0.000984] update your kernel commandline. [ 0.001009] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) [ 0.046983] pid_max: default: 32768 minimum: 301 [ 0.047266] Security Framework initialized [ 0.047290] Yama: becoming mindful. [ 0.047379] AppArmor: AppArmor initialized [ 0.047461] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.047477] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.048513] CPU: Testing write buffer coherency: ok [ 0.048586] CPU0: Spectre v2: using BPIALL workaround [ 0.049049] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.063087] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.071001] Hierarchical SRCU implementation. [ 0.082159] EFI services will not be available. [ 0.087008] smp: Bringing up secondary CPUs ... [ 0.087030] smp: Brought up 1 node, 1 CPU [ 0.087042] SMP: Total of 1 processors activated (995.32 BogoMIPS). [ 0.087051] CPU: All CPU(s) started in SVC mode. [ 0.088757] devtmpfs: initialized [ 0.103347] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.103802] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.103833] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.107812] xor: automatically using best checksumming function neon [ 0.107847] pinctrl core: initialized pinctrl subsystem [ 0.109031] NET: Registered protocol family 16 [ 0.112108] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.136570] omap_hwmod: debugss: _wait_target_disable failed [ 0.194915] OMAP GPIO hardware version 0.1 [ 0.208276] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.231123] raid6: using algorithm neonx8 gen() 0 MB/s [ 0.231146] raid6: .... xor() 0 MB/s, rmw enabled [ 0.231157] raid6: using neon recovery algorithm [ 0.238131] edma 49000000.edma: TI EDMA DMA engine driver [ 0.241601] SCSI subsystem initialized [ 0.243439] usbcore: registered new interface driver usbfs [ 0.243513] usbcore: registered new interface driver hub [ 0.243641] usbcore: registered new device driver usb [ 0.244196] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 0.244265] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe [ 0.244466] pps_core: LinuxPPS API ver. 1 registered [ 0.244477] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.244513] PTP clock support registered [ 0.245167] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.247349] Advanced Linux Sound Architecture Driver Initialized. [ 0.248056] NetLabel: Initializing [ 0.248072] NetLabel: domain hash size = 128 [ 0.248080] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.248179] NetLabel: unlabeled traffic allowed by default [ 0.251398] clocksource: Switched to clocksource timer1 [ 0.384346] VFS: Disk quotas dquot_6.6.0 [ 0.384482] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.385214] AppArmor: AppArmor Filesystem Enabled [ 0.396936] NET: Registered protocol family 2 [ 0.397831] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.397888] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.397951] TCP: Hash tables configured (established 4096 bind 4096) [ 0.398067] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.398094] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.398314] NET: Registered protocol family 1 [ 0.407273] RPC: Registered named UNIX socket transport module. [ 0.407296] RPC: Registered udp transport module. [ 0.407305] RPC: Registered tcp transport module. [ 0.407314] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.408420] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.408692] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.410199] audit: initializing netlink subsys (disabled) [ 0.411567] audit: type=2000 audit(0.408:1): state=initialized audit_enabled=0 res=1 [ 0.411734] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.417332] zbud: loaded [ 0.424734] NFS: Registering the id_resolver key type [ 0.424800] Key type id_resolver registered [ 0.424810] Key type id_legacy registered [ 0.424832] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.425207] fuse init (API version 7.26) [ 0.435022] Key type asymmetric registered [ 0.435049] Asymmetric key parser 'x509' registered [ 0.435197] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.439827] io scheduler noop registered [ 0.439846] io scheduler deadline registered [ 0.440097] io scheduler cfq registered (default) [ 0.440112] io scheduler mq-deadline registered [ 0.441437] pinctrl-single 44e10800.pinmux: please update dts to use #pinctrl-cells = <1> [ 0.441819] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.445312] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 0.446722] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 0.450502] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 [ 1.229260] console [ttyS0] enabled [ 1.235330] omap_rng 48310000.rng: Random Number Generator ver. 20 [ 1.242162] sdhci: Secure Digital Host Controller Interface driver [ 1.248433] sdhci: Copyright(c) Pierre Ossman [ 1.253264] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.303858] random: fast init done [ 1.334607] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.343004] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.350084] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 [ 1.356721] mmc0: Problem switching card into high-speed mode! [ 1.362877] mmc0: new SDHC card at address 0001 [ 1.367658] usbcore: registered new interface driver udl [ 1.374094] mmcblk0: mmc0:0001 SD32G 28.8 GiB [ 1.386497] mmcblk0: p1 p2 [ 1.396449] libphy: Fixed MDIO Bus: probed [ 1.402732] CAN device driver interface [ 1.439479] mmc1: new high speed MMC card at address 0001 [ 1.445884] mmcblk1: mmc1:0001 MK2704 3.53 GiB [ 1.451014] mmcblk1boot0: mmc1:0001 MK2704 partition 1 2.00 MiB [ 1.457437] mmcblk1boot1: mmc1:0001 MK2704 partition 2 2.00 MiB [ 1.463468] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 1.471638] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.477931] mmcblk1rpmb: mmc1:0001 MK2704 partition 3 512 KiB [ 1.485002] MDIO: davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe] [ 1.500418] libphy: 4a101000.mdio: probed [ 1.504718] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 1.515071] cpsw 4a100000.ethernet: Detected MACID = 68:5e:1c:bc:43:aa [ 1.521979] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 [ 1.528461] cpsw 4a100000.ethernet: ALE Table size 1024 [ 1.533814] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies) [ 1.542802] usbcore: registered new interface driver smsc95xx [ 1.549570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.556242] ehci-platform: EHCI generic platform driver [ 1.561734] ehci-omap: OMAP-EHCI Host Controller driver [ 1.567560] usbcore: registered new interface driver usb-storage [ 1.576207] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator [ 1.592030] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator [ 1.606209] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 1.611668] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 [ 1.619492] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.626346] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.633627] usb usb1: Product: MUSB HDRC host driver [ 1.638636] usb usb1: Manufacturer: Linux 4.14.108+ musb-hcd [ 1.644344] usb usb1: SerialNumber: musb-hdrc.1 [ 1.649705] hub 1-0:1.0: USB hub found [ 1.653668] hub 1-0:1.0: 1 port detected [ 1.668132] omap_rtc 44e3e000.rtc: registered as rtc0 [ 1.674190] i2c /dev entries driver [ 1.680375] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.687859] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 1.697097] cpu cpu0: "syscon" is missing, cannot use OPPv2 table. [ 1.704571] ledtrig-cpu: registered to indicate activity on CPUs [ 1.711114] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 1.717268] omap-aes 53500000.aes: will run requests pump with realtime priority [ 1.726792] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 1.735911] hidraw: raw HID events driver (C) Jiri Kosina [ 1.742521] remoteproc remoteproc0: wkup_m3 is available [ 1.749435] ti_emif_sram 4c000000.emif: Unable to get sram pool for ocmcram data [ 1.761441] Netfilter messages via NETLINK v0.30. [ 1.766650] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) [ 1.773193] nf_tables: (c) 2007-2009 Patrick McHardy [ 1.779834] nf_tables_compat: (c) 2012 Pablo Neira Ayuso [ 1.787292] wireguard: WireGuard 0.0.20191219 loaded. See www.wireguard.com for information. [ 1.795812] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 1.805821] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.812762] NET: Registered protocol family 10 [ 1.822883] Segment Routing with IPv6 [ 1.826813] mip6: Mobile IPv6 [ 1.829850] NET: Registered protocol family 17 [ 1.834355] can: controller area network core (rev 20170425 abi 9) [ 1.840690] NET: Registered protocol family 29 [ 1.845243] 8021q: 802.1Q VLAN Support v1.8 [ 1.849548] Key type dns_resolver registered [ 1.853870] mpls_gso: MPLS GSO support [ 1.857846] omap_voltage_late_init: Voltage driver support not added [ 1.864575] PM: Cannot get wkup_m3_ipc handle [ 1.869217] ThumbEE CPU extension supported. [ 1.873571] Registering SWP/SWPB emulation handler [ 1.879435] registered taskstats version 1 [ 1.883707] zswap: loaded using pool lzo/zbud [ 1.890549] Btrfs loaded, crc32c=crc32c-generic [ 1.895298] AppArmor: AppArmor sha1 policy hashing enabled [ 1.943878] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.949774] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.078260] tda998x 0-0070: found TDA19988 [ 2.083857] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops) [ 2.089975] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.096646] [drm] No driver support for vblank timestamp query. [ 2.103070] [drm] Cannot find any crtc or sizes [ 2.108391] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 1 [ 2.116058] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.123779] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.131132] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.138409] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.145681] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.152712] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.160005] remoteproc remoteproc0: powering up wkup_m3 [ 2.165379] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148 [ 2.173816] remoteproc remoteproc0: remote processor wkup_m3 is now up [ 2.173833] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192 [ 2.191227] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,00C0,2241SBB06178' [ 2.198610] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4 [ 2.232454] bone_capemgr bone_capemgr: slot #0: No cape found [ 2.263383] bone_capemgr bone_capemgr: slot #1: No cape found [ 2.295784] bone_capemgr bone_capemgr: slot #2: No cape found [ 2.328410] bone_capemgr bone_capemgr: slot #3: No cape found [ 2.334284] bone_capemgr bone_capemgr: initialized OK. [ 2.340600] hdmi-audio-codec hdmi-audio-codec.0.auto: ASoC: no source widget found for Playback [ 2.349449] hdmi-audio-codec hdmi-audio-codec.0.auto: ASoC: Failed to add route Playback -> direct -> TX [ 2.359826] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok [ 2.368115] pm33xx pm33xx: PM: am33xx_pm_alloc_sram: Unable to get sram pool for ocmcram [ 2.377279] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.386062] of_cfs_init [ 2.388684] of_cfs_init: OK [ 2.392181] ALSA device list: [ 2.395174] #0: TI BeagleBone Black [ 2.419115] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.427445] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 2.436362] devtmpfs: mounted [ 2.442641] Freeing unused kernel memory: 1024K [ 3.135931] [drm] Cannot find any crtc or sizes [ 3.164584] systemd[1]: System time before build time, advancing clock. [ 3.213385] random: systemd: uninitialized urandom read (16 bytes read) [ 3.224190] random: systemd: uninitialized urandom read (16 bytes read) [ 3.246147] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 3.265242] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! [ 3.285221] systemd[1]: Set hostname to . [ 3.479260] random: systemd-cryptse: uninitialized urandom read (16 bytes read) [ 4.067355] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.083862] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 4.100149] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 4.124521] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 4.140124] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 4.164006] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.180893] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. Mounting POSIX Message Queue File System... Mounting /sys/kernel/debug... [ OK ] Reached target Remote File Systems. [ OK ] Listening on udev Control Socket. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on Journal Socket. Starting Set the console keyboard layout... Starting Load Kernel Modules... [ OK ] Reached target Slices. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Reached target Encrypted Volumes. [ OK ] Created slice system-getty.slice. [ OK ] Listening on Journal Socket (/dev/log). Starting Create list of required st…ce nodes for the current kernel... [ OK ] Listening on Syslog Socket. Starting Journal Service... [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. [ OK ] Listening on fsck to fsckd communication Socket. Starting Remount Root and Kernel File Systems... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted /sys/kernel/debug. [ OK ] Started Create list of required sta…vice nodes for the current kernel. Starting Create Static Device Nodes in /dev... [ 4.901405] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ OK ] Started Load Kernel Modules. Mounting Configuration File System... Starting Apply Kernel Variables... Mounting FUSE Control File System... [ OK ] Mounted Configuration File System. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ OK ] Mounted FUSE Control File System. Starting udev Kernel Device Manager... Starting udev Coldplug all Devices... Starting Load/Save Random Seed... [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... [ OK ] Started Load/Save Random Seed. [ 5.912254] systemd-journald[125]: Received request to flush runtime journal from PID 1 [ OK ] Started udev Kernel Device Manager. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Set the console keyboard layout. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Set console font and keymap... Starting Raise network interfaces... Starting Create Volatile Files and Directories... [ OK ] Started Set console font and keymap. [ OK ] Started Create Volatile Files and Directories. [ OK ] Started Entropy daemon using the HAVEGE algorithm. Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on node-red.socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on cloud9.socket. [ OK ] Listening on bonescript.socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started D-Bus System Message Bus. Starting Connection service... Starting BBAI brcmfmac tether Service... Starting Save/Restore Sound Card State... Starting BB WL18xx wlan0 Service... Starting robotcontrol... [ OK ] Started Regular background program processing daemon. Starting System Logging Service... [ OK ] Started Deferred execution scheduler. Starting rc_battery_monitor... Starting LSB: Start busybox udhcpd at boot time... [ OK ] Started Bonescript autorun. Starting Generic Board Startup... Starting Login Service... Starting Avahi mDNS/DNS-SD Stack... Starting LSB: Start daemon at boot time... Starting LSB: Load kernel modules needed to enable cpufreq scaling... [ OK ] Started System Logging Service. [ OK ] Started Raise network interfaces. [ OK ] Started BBAI brcmfmac tether Service. [ OK ] Started Save/Restore Sound Card State. [ OK ] Started BB WL18xx wlan0 Service. [ OK ] Started robotcontrol. [ OK ] Started rc_battery_monitor. [ 11.288036] net eth0: initializing cpsw version 1.12 (0) [ 11.428811] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) [ 11.578064] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.643676] 8021q: adding VLAN 0 to HW filter on device eth0 [ OK ] Started LSB: Start busybox udhcpd at boot time. [ OK ] Started LSB: Start daemon at boot time. [ OK ] Started Connection service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Login Service. Starting Hostname Service... Starting WPA supplicant... [ OK ] Started WPA supplicant. [ OK ] Reached target Network. Starting Permit User Sessions... Starting OpenBSD Secure Shell server... [ OK ] Reached target Network is Online. Starting LSB: Advanced IEEE 802.11 management daemon... Starting A high performance web server and a reverse proxy server... [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling. [ OK ] Started Permit User Sessions. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Started Hostname Service. [ OK ] Started Getty on tty1. Starting LSB: set CPUFreq kernel parameters... [ 14.885738] using random self ethernet address [ 14.912491] using random host ethernet address [ 15.139768] using random self ethernet address [ 15.160114] using random host ethernet address [ OK ] Started LSB: set CPUFreq kernel parameters. [ OK ] Started OpenBSD Secure Shell server. [ 15.590608] Mass Storage Function, version: 2009/09/11 [ 15.611563] LUN: removable file: (no medium) [ 16.019642] usb0: HOST MAC 1c:ba:8c:a2:ed:69 [ 16.062633] usb0: MAC 1c:ba:8c:a2:ed:6a [ 16.098335] usb1: HOST MAC 1c:ba:8c:a2:ed:6c [ 16.129329] usb1: MAC 1c:ba:8c:a2:ed:6d [ 16.776124] configfs-gadget gadget: high-speed config #1: c [ 16.933969] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ OK ] Started A high performance web server and a reverse proxy server. [ 17.087642] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ OK ] Found device /dev/ttyS0. [ OK ] Started Serial Getty on ttyS0. Stopping LSB: Start busybox udhcpd at boot time... [ OK ] Stopped LSB: Start busybox udhcpd at boot time. Starting dnsmasq - A lightweight DHCP and caching DNS server... Debian GNU/Linux 9 beaglebone ttyS0 BeagleBoard.org Debian Image 2019-08-03 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] beaglebone login: [ 25.028040] random: crng init done [ 25.037080] random: 7 urandom warning(s) missed due to ratelimiting