login as: debian Debian GNU/Linux 8 BeagleBoard.org Debian Image 2017-03-19 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] debian@192.168.7.2's password: The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. debian@beaglebone:~$ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1128 errors:0 dropped:0 overruns:0 frame:0 TX packets:1128 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:87520 (85.4 KiB) TX bytes:87520 (85.4 KiB) usb0 Link encap:Ethernet HWaddr f4:5e:ab:4a:a5:bd inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252 inet6 addr: fe80::f65e:abff:fe4a:a5bd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:508 errors:0 dropped:0 overruns:0 frame:0 TX packets:74 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:81766 (79.8 KiB) TX bytes:19054 (18.6 KiB) usb1 Link encap:Ethernet HWaddr f4:5e:ab:4a:a5:c0 inet addr:192.168.6.2 Bcast:192.168.6.3 Mask:255.255.255.252 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) debian@beaglebone:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.54-ti-r93 (root@a4-imx6q-wandboard-2gb) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Fri Mar 17 13:08:22 UTC 2017 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone Blue [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] free_area_init_node: node 0, pgdat c105f300, node_mem_map df961000 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon ) [ 0.000000] PERCPU: Embedded 13 pages/cpu @df8f0000 s24320 r8192 d20736 u53248 [ 0.000000] pcpu-alloc: s24320 r8192 d20736 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129408 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=UUID=f85ff1b1-5272-4298-8078-c1b2028bfc80 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet cape_universal=enable [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 444476K/522240K available (11374K kernel code, 917K rwdata, 3800K rodata, 744K init, 907K bss, 28612K reserved, 49152K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0ed9b54 (15175 kB) .init : 0xc0eda000 - 0xc0f94000 ( 744 kB) .data : 0xc0f94000 - 0xc10795d0 ( 918 kB) .bss : 0xc107c000 - 0xc115efa8 ( 908 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000023] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000050] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000063] OMAP clocksource: timer1 at 24000000 Hz [ 0.002391] clocksource_probe: no matching clocksources found [ 0.002709] Console: colour dummy device 80x30 [ 0.002741] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.002750] This ensures that you still see kernel messages. Please [ 0.002756] update your kernel commandline. [ 0.002778] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) [ 0.020800] pid_max: default: 32768 minimum: 301 [ 0.020950] Security Framework initialized [ 0.020964] Yama: becoming mindful. [ 0.021001] AppArmor: AppArmor disabled by boot time parameter [ 0.021184] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.021196] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.022055] Initializing cgroup subsys io [ 0.022087] Initializing cgroup subsys memory [ 0.022134] Initializing cgroup subsys devices [ 0.022152] Initializing cgroup subsys freezer [ 0.022169] Initializing cgroup subsys net_cls [ 0.022184] Initializing cgroup subsys perf_event [ 0.022199] Initializing cgroup subsys net_prio [ 0.022224] Initializing cgroup subsys pids [ 0.022284] CPU: Testing write buffer coherency: ok [ 0.022344] ftrace: allocating 34653 entries in 102 pages [ 0.120444] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.120565] Setting up static identity map for 0x80008280 - 0x800082e0 [ 0.124695] Brought up 1 CPUs [ 0.124721] SMP: Total of 1 processors activated (995.32 BogoMIPS). [ 0.124729] CPU: All CPU(s) started in SVC mode. [ 0.126389] devtmpfs: initialized [ 0.165174] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.222019] omap_hwmod: debugss: _wait_target_disable failed [ 0.263479] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.263515] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.267515] xor: measuring software checksum speed [ 0.304777] arm4regs : 1219.000 MB/sec [ 0.344774] 8regs : 1090.000 MB/sec [ 0.384773] 32regs : 1089.000 MB/sec [ 0.424772] neon : 1739.000 MB/sec [ 0.424780] xor: using function: neon (1739.000 MB/sec) [ 0.424900] pinctrl core: initialized pinctrl subsystem [ 0.427573] NET: Registered protocol family 16 [ 0.431298] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.433255] cpuidle: using governor ladder [ 0.433282] cpuidle: using governor menu [ 0.439104] OMAP GPIO hardware version 0.1 [ 0.441787] GPIO line 106 (LS_BUF_EN) hogged as output/high [ 0.458153] No ATAGs? [ 0.458192] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.459435] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.459456] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.536792] raid6: int32x1 gen() 229 MB/s [ 0.604781] raid6: int32x1 xor() 175 MB/s [ 0.672938] raid6: int32x2 gen() 304 MB/s [ 0.740778] raid6: int32x2 xor() 198 MB/s [ 0.808894] raid6: int32x4 gen() 284 MB/s [ 0.876869] raid6: int32x4 xor() 199 MB/s [ 0.944881] raid6: int32x8 gen() 282 MB/s [ 1.012887] raid6: int32x8 xor() 186 MB/s [ 1.080787] raid6: neonx1 gen() 1466 MB/s [ 1.148783] raid6: neonx1 xor() 846 MB/s [ 1.216802] raid6: neonx2 gen() 1887 MB/s [ 1.284793] raid6: neonx2 xor() 1175 MB/s [ 1.352775] raid6: neonx4 gen() 1927 MB/s [ 1.420774] raid6: neonx4 xor() 1203 MB/s [ 1.488779] raid6: neonx8 gen() 1187 MB/s [ 1.556806] raid6: neonx8 xor() 844 MB/s [ 1.556814] raid6: using algorithm neonx4 gen() 1927 MB/s [ 1.556821] raid6: .... xor() 1203 MB/s, rmw enabled [ 1.556828] raid6: using intx1 recovery algorithm [ 1.566792] edma 49000000.edma: TI EDMA DMA engine driver [ 1.575097] SCSI subsystem initialized [ 1.575548] libata version 3.00 loaded. [ 1.575896] usbcore: registered new interface driver usbfs [ 1.575972] usbcore: registered new interface driver hub [ 1.576094] usbcore: registered new device driver usb [ 1.576946] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 1.577808] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 400 kHz [ 1.578470] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 400 kHz [ 1.578733] media: Linux media interface: v0.10 [ 1.578803] Linux video capture interface: v2.00 [ 1.578919] pps_core: LinuxPPS API ver. 1 registered [ 1.578928] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.578956] PTP clock support registered [ 1.579880] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 1.581424] NetLabel: Initializing [ 1.581442] NetLabel: domain hash size = 128 [ 1.581448] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.581511] NetLabel: unlabeled traffic allowed by default [ 1.581948] clocksource: Switched to clocksource timer1 [ 1.694062] NET: Registered protocol family 2 [ 1.694928] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 1.694979] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 1.695038] TCP: Hash tables configured (established 4096 bind 4096) [ 1.695120] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.695141] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.695477] NET: Registered protocol family 1 [ 1.696092] RPC: Registered named UNIX socket transport module. [ 1.696108] RPC: Registered udp transport module. [ 1.696115] RPC: Registered tcp transport module. [ 1.696121] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.696846] Unpacking initramfs... [ 2.083041] Freeing initrd memory: 5132K (cfafd000 - d0000000) [ 2.083721] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 2.087004] audit: initializing netlink subsys (disabled) [ 2.087106] audit: type=2000 audit(2.028:1): initialized [ 2.097906] zbud: loaded [ 2.098693] VFS: Disk quotas dquot_6.6.0 [ 2.098957] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.101718] NFS: Registering the id_resolver key type [ 2.101792] Key type id_resolver registered [ 2.101799] Key type id_legacy registered [ 2.101829] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.102327] fuse init (API version 7.23) [ 2.102987] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 2.111684] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.111956] io scheduler noop registered [ 2.111974] io scheduler deadline registered [ 2.112045] io scheduler cfq registered (default) [ 2.113696] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 2.119290] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 2.120969] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 2.124445] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250 [ 2.137882] console [ttyS0] enabled [ 2.138852] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250 [ 2.139652] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 160, base_baud = 3000000) is a 8250 [ 2.140477] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 161, base_baud = 3000000) is a 8250 [ 2.141215] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 162, base_baud = 3000000) is a 8250 [ 2.142069] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 163, base_baud = 3000000) is a 8250 [ 2.143928] [drm] Initialized drm 1.1.0 20060810 [ 2.155456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.155515] ehci-platform: EHCI generic platform driver [ 2.155775] ehci-omap: OMAP-EHCI Host Controller driver [ 2.156335] usbcore: registered new interface driver usb-storage [ 2.159303] 47401300.usb-phy supply vcc not found, using dummy regulator [ 2.162082] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 2.162104] musb-hdrc: MHDRC RTL version 2.0 [ 2.162113] musb-hdrc: setup fifo_mode 4 [ 2.162133] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 2.164291] 47401b00.usb-phy supply vcc not found, using dummy regulator [ 2.166883] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 2.166903] musb-hdrc: MHDRC RTL version 2.0 [ 2.166912] musb-hdrc: setup fifo_mode 4 [ 2.166929] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 2.167094] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 2.167138] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 2.167463] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.167477] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.167486] usb usb1: Product: MUSB HDRC host driver [ 2.167496] usb usb1: Manufacturer: Linux 4.4.54-ti-r93 musb-hcd [ 2.167504] usb usb1: SerialNumber: musb-hdrc.1.auto [ 2.168481] hub 1-0:1.0: USB hub found [ 2.168547] hub 1-0:1.0: 1 port detected [ 2.178989] mousedev: PS/2 mouse device common for all mice [ 2.181868] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 2.183142] i2c /dev entries driver [ 2.185485] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.186225] cpuidle: enable-method property 'ti,am3352' found operations [ 2.187215] omap_hsmmc 48060000.mmc: Got CD GPIO [ 2.292638] mmc1: MAN_BKOPS_EN bit is not set [ 2.300022] mmc1: new high speed MMC card at address 0001 [ 2.301111] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.301549] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.302039] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.303314] mmcblk1: p1 [ 2.361313] hidraw: raw HID events driver (C) Jiri Kosina [ 2.362484] usbcore: registered new interface driver usbhid [ 2.362500] usbhid: USB HID core driver [ 2.366112] ashmem: initialized [ 2.367329] remoteproc0: wkup_m3 is available [ 2.367347] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 2.367355] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 2.371844] NET: Registered protocol family 10 [ 2.374594] mip6: Mobile IPv6 [ 2.374625] NET: Registered protocol family 17 [ 2.374784] Key type dns_resolver registered [ 2.374802] mpls_gso: MPLS GSO support [ 2.375098] omap_voltage_late_init: Voltage driver support not added [ 2.382967] PM: Cannot get wkup_m3_ipc handle [ 2.387521] ThumbEE CPU extension supported. [ 2.387555] Registering SWP/SWPB emulation handler [ 2.388637] registered taskstats version 1 [ 2.388842] zswap: loaded using pool lzo/zbud [ 2.392789] Btrfs loaded [ 2.417877] Key type encrypted registered [ 2.421534] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/input/input0 [ 2.444318] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.444977] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.445036] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.446477] remoteproc0: powering up wkup_m3 [ 2.446796] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148 [ 2.447094] remoteproc0: remote processor wkup_m3 is now up [ 2.447117] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192 [ 2.448652] PM: bootloader does not support rtc-only! [ 2.449768] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.449802] of_cfs_init [ 2.450152] of_cfs_init: OK [ 2.456304] PM: Hibernation image not present or could not be loaded. [ 2.456348] wlan-en-regulator: disabling [ 2.458077] Freeing unused kernel memory: 744K (c0eda000 - c0f94000) [ 2.685155] random: systemd-udevd: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.685900] random: systemd-udevd: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.690388] random: systemd-udevd: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.703809] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.704264] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.704462] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.705174] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.705789] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.706721] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.707324] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 4.909823] ti-pruss 4a300000.pruss: creating PRU cores and other child platform devices [ 4.913686] irq: no irq domain found for /ocp/pruss@4a300000/intc@4a320000 ! [ 4.954392] irq: no irq domain found for /ocp/pruss@4a300000/intc@4a320000 ! [ 4.993026] remoteproc1: 4a334000.pru0 is available [ 4.993054] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 4.993062] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 4.993349] remoteproc1: Direct firmware load for am335x-pru0-fw failed with error -2 [ 4.993370] remoteproc1: failed to load am335x-pru0-fw [ 5.033475] pru-rproc 4a334000.pru0: booting the PRU core manually [ 5.033511] remoteproc1: powering up 4a334000.pru0 [ 5.033618] remoteproc1: Direct firmware load for am335x-pru0-fw failed with error -2 [ 5.033635] remoteproc1: request_firmware failed: -2 [ 5.038862] pru-rproc 4a334000.pru0: rproc_boot failed [ 5.138066] remoteproc1: releasing 4a334000.pru0 [ 5.140468] pru-rproc: probe of 4a334000.pru0 failed with error -2 [ 5.140955] remoteproc1: 4a338000.pru1 is available [ 5.140971] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 5.140980] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.141239] remoteproc1: Direct firmware load for am335x-pru1-fw failed with error -2 [ 5.141260] remoteproc1: failed to load am335x-pru1-fw [ 5.162275] pru-rproc 4a338000.pru1: booting the PRU core manually [ 5.162309] remoteproc1: powering up 4a338000.pru1 [ 5.162426] remoteproc1: Direct firmware load for am335x-pru1-fw failed with error -2 [ 5.162443] remoteproc1: request_firmware failed: -2 [ 5.167610] pru-rproc 4a338000.pru1: rproc_boot failed [ 5.287043] remoteproc1: releasing 4a338000.pru1 [ 5.287210] pru-rproc: probe of 4a338000.pru1 failed with error -2 [ 11.299130] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 11.686560] systemd[1]: System time before build time, advancing clock. [ 11.725434] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 11.761676] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 11.762642] systemd[1]: Detected architecture arm. [ 11.763921] systemd[1]: Set hostname to . [ 12.339352] systemd[1]: Reached target Encrypted Volumes. [ 12.340920] systemd[1]: Created slice System Slice. [ 12.341865] systemd[1]: Created slice system-getty.slice. [ 12.342671] systemd[1]: Listening on Journal Socket (/dev/log). [ 12.343030] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 12.343470] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 12.343838] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 12.343944] systemd[1]: Reached target Paths. [ 12.345579] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 12.345752] systemd[1]: Reached target Swap. [ 12.346779] systemd[1]: Listening on Journal Audit Socket. [ 12.346940] systemd[1]: Reached target Remote File Systems (Pre). [ 12.347254] systemd[1]: Listening on fsck to fsckd communication Socket. [ 12.348130] systemd[1]: Created slice User and Session Slice. [ 12.348266] systemd[1]: Reached target Slices. [ 12.348366] systemd[1]: Reached target Remote File Systems. [ 12.348778] systemd[1]: Listening on udev Control Socket. [ 12.349026] systemd[1]: Listening on Syslog Socket. [ 12.350204] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 12.350598] systemd[1]: Listening on udev Kernel Socket. [ 12.351025] systemd[1]: Listening on Journal Socket. [ 12.356099] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 12.394321] systemd[1]: Starting LSB: Set console font and keymap... [ 12.430882] systemd[1]: Starting File System Check on Root Device... [ 12.493010] systemd[1]: Mounting POSIX Message Queue File System... [ 12.535717] systemd[1]: Starting Journal Service... [ 12.565674] systemd[1]: Mounting /sys/kernel/debug... [ 12.771525] systemd[1]: Starting Load Kernel Modules... [ 12.885050] systemd[1]: Mounted POSIX Message Queue File System. [ 12.885396] systemd[1]: Mounted /sys/kernel/debug. [ 12.911466] eqep 48300180.eqep: ver. 1.0 [ 12.911515] eqep 48300180.eqep: unable to select pin group [ 12.915299] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 12.922382] eqep 48302180.eqep: ver. 1.0 [ 12.922432] eqep 48302180.eqep: unable to select pin group [ 12.925243] systemd[1]: Started LSB: Set console font and keymap. [ 12.930413] eqep 48304180.eqep: ver. 1.0 [ 12.930467] eqep 48304180.eqep: unable to select pin group [ 12.943777] systemd[1]: Started File System Check on Root Device. [ 12.960663] systemd[1]: Started Load Kernel Modules. [ 13.013533] systemd[1]: Started File System Check Daemon to report status. [ 13.035654] systemd[1]: Mounting FUSE Control File System... [ 13.069044] systemd[1]: Mounting Configuration File System... [ 13.174893] systemd[1]: Starting Apply Kernel Variables... [ 13.211704] systemd[1]: Starting Create Static Device Nodes in /dev... [ 13.297150] systemd[1]: Mounted Configuration File System. [ 13.297528] systemd[1]: Mounted FUSE Control File System. [ 13.312181] systemd[1]: Started Journal Service. [ 13.898503] EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro [ 14.507303] systemd-journald[577]: Received request to flush runtime journal from PID 1 [ 15.156037] random: nonblocking pool is initialized [ 39.131703] CAN device driver interface [ 39.346172] c_can_platform 481d0000.can: c_can_platform device registered (regs=fa1d0000, irq=171) [ 40.086720] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 43.712674] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 43.927618] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 65.785603] using random self ethernet address [ 65.785633] using random host ethernet address [ 65.849622] using random self ethernet address [ 65.849654] using random host ethernet address [ 65.961799] Mass Storage Function, version: 2009/09/11 [ 65.961833] LUN: removable file: (no medium) [ 66.086243] usb0: HOST MAC f4:5e:ab:4a:a5:bc [ 66.086976] usb0: MAC f4:5e:ab:4a:a5:bd [ 66.095290] usb1: HOST MAC f4:5e:ab:4a:a5:bf [ 66.095928] usb1: MAC f4:5e:ab:4a:a5:c0 [ 66.375625] configfs-gadget gadget: high-speed config #1: c [ 66.718993] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready debian@beaglebone:~$