U-Boot SPL 2019.04-00002-gc9b3922522 (Aug 24 2020 - 16:42:18 -0500) Trying to boot from MMC2 Loading Environment from EXT4... ** File not found /boot/uboot.env ** ** Unable to read "/boot/uboot.env" from mmc0:1 ** U-Boot 2019.04-00002-gc9b3922522 (Aug 24 2020 - 16:42:18 -0500), Build: jenkins-github_Bootloader-Builder-144 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... ** File not found /boot/uboot.env ** ** Unable to read "/boot/uboot.env" from mmc0:1 ** Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone Cape EEPROM: no EEPROM at address: 0x54 BeagleBone Cape EEPROM: no EEPROM at address: 0x55 BeagleBone Cape EEPROM: no EEPROM at address: 0x56 BeagleBone Cape EEPROM: no EEPROM at address: 0x57 Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 0 seconds board_name=[A335BNLT] ... board_rev=[00C0] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 switch to partitions #0, OK mmc0 is current device bad MBR sector signature 0x3dbf bad MBR sector signature 0xa68e bad MBR sector signature 0xa68e ** Invalid partition 1 ** gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 ** No partition table - mmc 0 ** Checking for: /uEnv.txt ... ** No partition table - mmc 0 ** Checking for: /boot.scr ... ** No partition table - mmc 0 ** Checking for: /boot/boot.scr ... ** No partition table - mmc 0 ** Checking for: /boot/uEnv.txt ... ** No partition table - mmc 0 ** ** No partition table - mmc 0 ** ** No partition table - mmc 0 ** ** No partition table - mmc 0 ** ** No partition table - mmc 0 ** ** No partition table - mmc 0 ** ** No partition table - mmc 0 ** switch to partitions #0, OK mmc1(part 0) is current device Scanning mmc 1:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc1(part 0) is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 2005 bytes read in 13 ms (150.4 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.19.94-ti-r73 ... 10170880 bytes read in 657 ms (14.8 MiB/s) debug: [enable_uboot_overlays=1] ... debug: [enable_uboot_cape_universal=1] ... debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ... loading /boot/dtbs/4.19.94-ti-r73/am335x-boneblack-uboot-univ.dtb ... 167492 bytes read in 39 ms (4.1 MiB/s) uboot_overlays: [fdt_buffer=0x60000] ... uboot_overlays: loading /boot/dtbs/4.19.94-ti-r73/overlays/BB-ADC-00A0.dtbo ... 645 bytes read in 87 ms (6.8 KiB/s) uboot_overlays: loading /boot/dtbs/4.19.94-ti-r73/overlays/BB-BONE-eMMC1-01-00A0.dtbo ... 1605 bytes read in 95 ms (15.6 KiB/s) uboot_overlays: loading /boot/dtbs/4.19.94-ti-r73/overlays/BB-HDMI-TDA998x-00A0.dtbo ... 5321 bytes read in 98 ms (52.7 KiB/s) uboot_overlays: loading /lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo ... 3653 bytes read in 300 ms (11.7 KiB/s) loading /boot/initrd.img-4.19.94-ti-r73 ... 7072097 bytes read in 465 ms (14.5 MiB/s) debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet] ... debug: [bootz 0x82000000 0x88080000:6be961 88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8f941000, end 8ffff961 ... OK Loading Device Tree to 8f8b4000, end 8f940fff ... OK Starting kernel ... [ 0.002259] timer_probe: no matching timers found [ 0.202171] l4_wkup_cm:clk:0010:0: failed to disable [ 1.452842] omap_voltage_late_init: Voltage driver support not added rootfs: recovering journal rootfs: clean, 89954/233392 files, 556302/932864 blocks Debian GNU/Linux 10 beaglebone ttyS0 BeagleBoard.org Debian Buster IoT Image 2020-04-06 Support: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] beaglebone login: