U-Boot SPL 2018.01-00002-g9aa111a004 (Jan 20 2018 - 12:45:29) Trying to boot from MMC1 U-Boot 2018.01-00002-g9aa111a004 (Jan 20 2018 - 12:45:29 -0600), Build: jenkins-github_Bootloader-Builder-32 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: Model: SeeedStudio BeagleBone Green: i2c_read: error waiting for addr ACK (status=0x106) BeagleBone: cape eeprom: Could not read the EEPROM; something fundamentally wrong on the I2C bus. Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds board_name=[BBG1] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Bad device 0:2 0x82000000 ** ** Bad device 0:2 0x82000000 ** switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 2058 bytes read in 36 ms (55.7 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.14.20-ti-r36 ... 11665920 bytes read in 774 ms (14.4 MiB/s) loading /boot/dtbs/4.14.20-ti-r36/am335x-bonegreen.dtb ... 57974 bytes read in 65 ms (870.1 KiB/s) uboot_overlays: [fdt_buffer=0x60000] ... loading /boot/initrd.img-4.14.20-ti-r36 ... 4472330 bytes read in 322 ms (13.2 MiB/s) debug: [console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] ... debug: [bootz 0x82000000 0x88080000:443e0a 0x88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fbbc000, end 8ffffe0a ... OK Loading Device Tree to 8fbaa000, end 8fbbb275 ... OK Starting kernel ... [ 0.000731] timer_probe: no matching timers found [ 0.472446] dmi: Firmware registration failed. [ 0.933002] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 1.159785] omap_voltage_late_init: Voltage driver support not added rootfs: recovering journal rootfs: clean, 91885/959616 files, 592077/3888512 blocks Debian GNU/Linux 9 beaglebone ttyS0 BeagleBoard.org Debian Image 2018-01-28 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] beaglebone login: