U-Boot SPL 2019.04-00002-g3d8c979660 (Nov 01 2019 - 09:14:23 -0500) Trying to boot from MMC2 Loading Environment from EXT4... ** File not found /boot/uboot.env ** ** Unable to read "/boot/uboot.env" from mmc0:1 ** U-Boot 2019.04-00002-g3d8c979660 (Nov 01 2019 - 09:14:23 -0500), Build: jenkins-github_Bootloader-Builder-134 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... ** File not found /boot/uboot.env ** ** Unable to read "/boot/uboot.env" from mmc0:1 ** Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: Timed out in wait_for_event: status=0000 Check if pads/pull-ups of bus are properly configured BeagleBone: cape eeprom: i2c_probe: 0x54: Timed out in wait_for_event: status=0000 Check if pads/pull-ups of bus are properly configured BeagleBone: cape eeprom: i2c_probe: 0x55: Timed out in wait_for_event: status=0000 Check if pads/pull-ups of bus are properly configured BeagleBone: cape eeprom: i2c_probe: 0x56: Timed out in wait_for_event: status=0000 Check if pads/pull-ups of bus are properly configured BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 0 seconds board_name=[A335BNLT] ... board_rev=[00C0] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 1803 bytes read in 58 ms (30.3 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-5.10.168-ti-r69 ... 11272704 bytes read in 803 ms (13.4 MiB/s) debug: [enable_uboot_overlays=1] ... debug: [enable_uboot_cape_universal=] ... debug: [uboot_base_dtb_univ=am335x-boneblack-uboot.dtb] ... uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ... uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ... loading /boot/dtbs/5.10.168-ti-r69/am335x-boneblack-uboot.dtb ... 102508 bytes read in 127 ms (788.1 KiB/s) uboot_overlays: [fdt_buffer=0x60000] ... uboot_overlays: loading /lib/firmware/BB-FB-LEDs-00A0.dtbo ... 2992 bytes read in 915 ms (2.9 KiB/s) uboot_overlays: loading /lib/firmware/BB-I2C2-ALTERNATIVE-RTC-DS1307.dtbo ... 1544 bytes read in 1300 ms (1000 Bytes/s) uboot_overlays: loading /lib/firmware/BB-CAN0-00A0.dtbo ... 1013 bytes read in 180 ms (4.9 KiB/s) uboot_overlays: loading /lib/firmware/BB-CAN1-00A0.dtbo ... 1013 bytes read in 1375 ms (0 Bytes/s) uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ... 1614 bytes read in 526 ms (2.9 KiB/s) uboot_overlays: uboot loading of [/lib/firmware/BB-HDMI-TDA998x-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_video=1]... uboot_overlays: uboot loading of [/lib/firmware/BB-ADC-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_adc=1]... uboot_overlays: add [enable_uboot_cape_universal=1] to /boot/uEnv.txt to enable... loading /boot/initrd.img-5.10.168-ti-r69 ... 6957280 bytes read in 520 ms (12.8 MiB/s) debug: [console=ttyS0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet] ... debug: [bootz 0x82000000 0x88080000:6a28e0 88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8f95d000, end 8ffff8e0 ... OK Loading Device Tree to 8f8e0000, end 8f95cfff ... OK Starting kernel ... [ 0.118268] l3-aon-clkctrl:0000:0: failed to disable [ 3.624219] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! [ 3.713864] mdio_bus 4a101000.mdio: mii_bus 4a101000.mdio couldn't get reset GPIO [ 3.881042] omap_voltage_late_init: Voltage driver support not added rootfs: clean, 54197/979200 files, 617916/3913728 blocks [ 29.543473] pinctrl-single 44e10800.pinmux: pin PIN95 already requested by 4819c000.i2c; cannot claim for 481cc000.can [ 29.776049] pinctrl-single 44e10800.pinmux: pin-95 (481cc000.can) status -22 [ 29.869397] pinctrl-single 44e10800.pinmux: could not request pin 95 (PIN95) from group pinmux_dcan0_pins on device pinctrl-single [ 29.992577] c_can_platform 481cc000.can: Error applying setting, reverse things back Debian GNU/Linux 11 BeagleBone ttyS0 BeagleBoard.org Debian Bullseye Minimal Image 2023-08-05 Support: https://bbb.io/debian default username:password is [debian:temppwd]