[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.13 (koen@rrMBP) (gcc version 4.7.3 20130205 (prerelease) (Linaro GCC 4.7-2013.02-01) ) #1 SMP Tue Jun 25 08:17:15 EDT 2013 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 130816 [ 0.000000] free_area_init_node: node 0, pgdat c068adc0, node_mem_map c06e6000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 129792 pages, LIFO batch:31 [ 0.000000] AM335X ES1.0 (neon ) [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0af5000 s9408 r8192 d15168 u32768 [ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 511MB = 511MB total [ 0.000000] Memory: 510552k/510552k available, 13736k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB) [ 0.000000] .text : 0xc0008000 - 0xc05d79ec (5951 kB) [ 0.000000] .init : 0xc05d8000 - 0xc06194c0 ( 262 kB) [ 0.000000] .data : 0xc061a000 - 0xc068bce0 ( 456 kB) [ 0.000000] .bss : 0xc068bce0 - 0xc06e56fc ( 359 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000358] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968) [ 0.015429] pid_max: default: 32768 minimum: 301 [ 0.015665] Security Framework initialized [ 0.015758] Mount-cache hash table entries: 512 [ 0.026014] Initializing cgroup subsys cpuacct [ 0.026046] Initializing cgroup subsys memory [ 0.026110] Initializing cgroup subsys blkio [ 0.026246] CPU: Testing write buffer coherency: ok [ 0.026778] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.026855] Setting up static identity map for 0x803728a0 - 0x803728ec [ 0.028252] Brought up 1 CPUs [ 0.028278] SMP: Total of 1 processors activated (545.07 BogoMIPS). [ 0.029569] devtmpfs: initialized [ 0.094503] pinctrl core: initialized pinctrl subsystem [ 0.094718] rstctl core: initialized rstctl subsystem [ 0.095203] regulator-dummy: no parameters [ 0.095780] NET: Registered protocol family 16 [ 0.096624] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.106552] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.107373] platform 49000000.edma: alias fck already exists [ 0.107407] platform 49000000.edma: alias fck already exists [ 0.107434] platform 49000000.edma: alias fck already exists [ 0.108579] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.108757] OMAP GPIO hardware version 0.1 [ 0.110157] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.111472] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.112763] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.113403] of_get_named_gpio_flags exited with status 52 [ 0.113434] gpio-rctrl rstctl.3: loaded OK [ 0.118745] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.120950] cpsw.0: No hwaddr in dt. Using c8:a0:30:af:cd:d0 from efuse [ 0.120982] cpsw.1: No hwaddr in dt. Using c8:a0:30:af:cd:d2 from efuse [ 0.135651] bio: create slab at 0 [ 0.147674] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.147899] of_get_named_gpio_flags: can't parse gpios property [ 0.148128] vmmcsd_fixed: 3300 mV [ 0.150996] SCSI subsystem initialized [ 0.151419] usbcore: registered new interface driver usbfs [ 0.151530] usbcore: registered new interface driver hub [ 0.151827] usbcore: registered new device driver usb [ 0.153882] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 0.155356] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0 [ 0.157074] DCDC1: at 1500 mV [ 0.158264] vdd_mpu: 925 <--> 1325 mV at 950 mV [ 0.159364] vdd_core: 925 <--> 1150 mV at 1100 mV [ 0.160545] LDO1: at 1800 mV [ 0.161651] LDO2: at 3300 mV [ 0.163640] LDO3: 1800 mV [ 0.164795] LDO4: at 3300 mV [ 0.165831] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 0.166527] omap_i2c 44e0b000.i2c: unable to select pin group [ 0.167226] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz [ 0.169587] omap_i2c 4819c000.i2c: unable to select pin group [ 0.169876] media: Linux media interface: v0.10 [ 0.169979] Linux video capture interface: v2.00 [ 0.170662] Advanced Linux Sound Architecture Driver Initialized. [ 0.171993] Switching to clocksource gp_timer [ 0.190221] NET: Registered protocol family 2 [ 0.191218] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.191361] TCP bind hash table entries: 4096 (order: 4, 81920 bytes) [ 0.191525] TCP: Hash tables configured (established 4096 bind 4096) [ 0.191692] TCP: reno registered [ 0.191722] UDP hash table entries: 256 (order: 1, 12288 bytes) [ 0.191768] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) [ 0.192190] NET: Registered protocol family 1 [ 0.192781] RPC: Registered named UNIX socket transport module. [ 0.192801] RPC: Registered udp transport module. [ 0.192815] RPC: Registered tcp transport module. [ 0.192829] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.194004] CPU PMU: probing PMU on CPU 0 [ 0.194037] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.194485] omap2_mbox_probe: platform not supported [ 0.198338] VFS: Disk quotas dquot_6.5.2 [ 0.198571] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.199820] NFS: Registering the id_resolver key type [ 0.199924] Key type id_resolver registered [ 0.199942] Key type id_legacy registered [ 0.200006] jffs2: version 2.2. (NAND) (SUMMARY) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc. [ 0.200450] msgmni has been set to 997 [ 0.203269] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.203295] io scheduler noop registered [ 0.203378] io scheduler deadline registered [ 0.203424] io scheduler cfq registered (default) [ 0.205071] tps65217-bl tps65217-bl: no platform data provided [ 0.205113] tps65217-bl: probe of tps65217-bl failed with error -22 [ 0.206079] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.208592] omap_uart 44e09000.serial: did not get pins for uart0 error: -19 [ 0.208893] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0 [ 0.221225] console [ttyO0] enabled [ 0.236068] brd: module loaded [ 0.243181] loop: module loaded [ 0.243319] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 0.243398] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 0.243467] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 0.243536] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 0.243615] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 0.250743] bone-capemgr bone_capemgr.8: Baseboard: 'A335BNLT,0A5A,1713BBBK0679' [ 0.250782] bone-capemgr bone_capemgr.8: compatible-baseboard=ti,beaglebone-black [ 0.281488] bone-capemgr bone_capemgr.8: slot #0: No cape found [ 0.318595] bone-capemgr bone_capemgr.8: slot #1: No cape found [ 0.355702] bone-capemgr bone_capemgr.8: slot #2: No cape found [ 0.392812] bone-capemgr bone_capemgr.8: slot #3: No cape found [ 0.399072] bone-capemgr bone_capemgr.8: slot #4: specific override [ 0.399115] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 4 [ 0.399145] bone-capemgr bone_capemgr.8: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G' [ 0.399287] bone-capemgr bone_capemgr.8: slot #5: specific override [ 0.399324] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 5 [ 0.399352] bone-capemgr bone_capemgr.8: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI' [ 0.399498] bone-capemgr bone_capemgr.8: slot #6: specific override [ 0.399534] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 6 [ 0.399563] bone-capemgr bone_capemgr.8: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN' [ 0.400064] bone-capemgr bone_capemgr.8: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1) [ 0.400093] bone-capemgr bone_capemgr.8: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1) [ 0.400227] bone-capemgr bone_capemgr.8: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1) [ 0.400252] bone-capemgr bone_capemgr.8: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1) [ 0.400315] bone-capemgr bone_capemgr.8: initialized OK. [ 0.402293] OneNAND driver initializing [ 0.402635] bone-capemgr bone_capemgr.8: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1) [ 0.402678] bone-capemgr bone_capemgr.8: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0' [ 0.402709] bone-capemgr bone_capemgr.8: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree [ 0.403013] bone-capemgr bone_capemgr.8: slot #4: #2 overlays [ 0.403872] bone-capemgr bone_capemgr.8: slot #4: Applied #2 overlays. [ 0.403901] bone-capemgr bone_capemgr.8: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1) [ 0.404061] bone-capemgr bone_capemgr.8: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1) [ 0.404102] bone-capemgr bone_capemgr.8: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0' [ 0.404140] bone-capemgr bone_capemgr.8: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree [ 0.405320] bone-capemgr bone_capemgr.8: slot #5: #4 overlays [ 0.407871] usbcore: registered new interface driver asix [ 0.407997] usbcore: registered new interface driver cdc_ether [ 0.408138] usbcore: registered new interface driver smsc95xx [ 0.408242] usbcore: registered new interface driver net1080 [ 0.408331] usbcore: registered new interface driver cdc_subset [ 0.408517] usbcore: registered new interface driver zaurus [ 0.408685] usbcore: registered new interface driver cdc_ncm [ 0.409283] bone-capemgr bone_capemgr.8: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 0.409312] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 0.409342] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 0.410584] platform 4830e000.fb: alias fck already exists [ 0.412163] bone-capemgr bone_capemgr.8: slot #5: Applied #4 overlays. [ 0.412194] bone-capemgr bone_capemgr.8: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1) [ 0.412260] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 0.412289] bone-capemgr bone_capemgr.8: loader: after slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 0.412426] bone-capemgr bone_capemgr.8: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0' [ 0.412464] bone-capemgr bone_capemgr.8: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree [ 0.412806] bone-capemgr bone_capemgr.8: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI) [ 0.422426] bone-capemgr bone_capemgr.8: slot #6: Failed verification [ 0.429203] bone-capemgr bone_capemgr.8: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2) [ 0.439086] usbcore: registered new interface driver cdc_acm [ 0.439103] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.439117] Initializing USB Mass Storage driver... [ 0.439240] usbcore: registered new interface driver usb-storage [ 0.439255] USB Mass Storage support registered. [ 0.439479] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 0.439928] musb-hdrc musb-hdrc.0.auto: pdev->id = 0 [ 0.439956] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK [ 0.439994] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.440014] musb-hdrc: MHDRC RTL version 2.0 [ 0.440029] musb-hdrc: setup fifo_mode 4 [ 0.440056] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 0.440196] musb-hdrc musb-hdrc.0.auto: *** mode=3 [ 0.440217] musb-hdrc musb-hdrc.0.auto: *** power=250 [ 0.441095] musb-hdrc musb-hdrc.1.auto: pdev->id = 1 [ 0.441123] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK [ 0.441160] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.441179] musb-hdrc: MHDRC RTL version 2.0 [ 0.441192] musb-hdrc: setup fifo_mode 4 [ 0.441215] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 0.441343] musb-hdrc musb-hdrc.1.auto: *** mode=1 [ 0.441364] musb-hdrc musb-hdrc.1.auto: *** power=250 [ 0.441385] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 0.441896] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 0.441938] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup [ 0.442041] usb usb1: default language 0x0409 [ 0.442100] usb usb1: udev 1, busnum 1, minor = 0 [ 0.442123] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.442146] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.442166] usb usb1: Product: MUSB HDRC host driver [ 0.442185] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd [ 0.442205] usb usb1: SerialNumber: musb-hdrc.1.auto [ 0.442978] usb usb1: usb_probe_device [ 0.443007] usb usb1: configuration #1 chosen from 1 choice [ 0.443072] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.443304] hub 1-0:1.0: usb_probe_interface [ 0.443326] hub 1-0:1.0: usb_probe_interface - got id [ 0.443355] hub 1-0:1.0: USB hub found [ 0.443395] hub 1-0:1.0: 1 port detected [ 0.443415] hub 1-0:1.0: standalone hub [ 0.443433] hub 1-0:1.0: individual port power switching [ 0.443450] hub 1-0:1.0: no over-current protection [ 0.443468] hub 1-0:1.0: Single TT [ 0.443489] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.443508] hub 1-0:1.0: power on to power good time: 10ms [ 0.443665] hub 1-0:1.0: local power source is good [ 0.443793] hub 1-0:1.0: enabling power on all ports [ 0.444831] mousedev: PS/2 mouse device common for all mice [ 0.447221] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 0.447286] 44e3e000.rtc: already running [ 0.447720] i2c /dev entries driver [ 0.449391] Driver for 1-wire Dallas network protocol. [ 0.450948] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 0.451309] cpuidle: using governor ladder [ 0.451328] cpuidle: using governor menu [ 0.451807] of_get_named_gpio_flags: can't parse gpios property [ 0.451826] of_get_named_gpio_flags: can't parse gpios property [ 0.451841] of_get_named_gpio_flags: can't parse gpios property [ 0.451879] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed [ 0.459120] omap_hsmmc mmc.4: Failed to get rstctl; not using any [ 0.459208] omap_hsmmc mmc.4: unable to select pin group [ 0.459496] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25 [ 0.459582] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24 [ 0.459822] mmc.4 supply vmmc_aux not found, using dummy regulator [ 0.459959] omap_hsmmc mmc.4: pins are not configured from the driver [ 0.486808] of_get_named_gpio_flags: can't parse gpios property [ 0.486830] of_get_named_gpio_flags: can't parse gpios property [ 0.486847] of_get_named_gpio_flags: can't parse gpios property [ 0.486901] gpio-rctrl rstctl.3: gpio_rctrl_request eMMC_RSTn [ 0.486991] omap_hsmmc mmc.10: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn [ 0.487014] gpio-rctrl rstctl.3: gpio_rctrl_deassert eMMC_RSTn [ 0.487316] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3 [ 0.487397] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2 [ 0.487926] mmc.10 supply vmmc_aux not found, using dummy regulator [ 0.488146] omap_hsmmc mmc.10: pins are not configured from the driver [ 0.516349] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7 [ 0.528085] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22 [ 0.535398] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single [ 0.544389] leds-gpio gpio-leds.7: pins are not configured from the driver [ 0.544429] of_get_named_gpio_flags exited with status 53 [ 0.544451] of_get_named_gpio_flags exited with status 54 [ 0.544473] of_get_named_gpio_flags exited with status 55 [ 0.544495] of_get_named_gpio_flags exited with status 56 [ 0.544519] of_get_named_gpio_flags exited with status 53 [ 0.544747] of_get_named_gpio_flags exited with status 54 [ 0.544956] of_get_named_gpio_flags exited with status 55 [ 0.545267] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 0.545339] hub 1-0:1.0: hub_suspend [ 0.545380] usb usb1: bus auto-suspend, wakeup 1 [ 0.545585] of_get_named_gpio_flags exited with status 56 [ 0.545996] ledtrig-cpu: registered to indicate activity on CPUs [ 0.546440] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36 [ 0.546520] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 0.548759] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 0.548889] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5 [ 0.548968] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6 [ 0.550210] usbcore: registered new interface driver usbhid [ 0.550229] usbhid: USB HID core driver [ 0.552755] of_get_named_gpio_flags exited with status 59 [ 0.554252] davinci_evm sound.13: nxp-hdmi-hifi <-> 48038000.mcasp mapping ok [ 0.558753] TCP: cubic registered [ 0.558880] Initializing XFRM netlink socket [ 0.559004] NET: Registered protocol family 17 [ 0.559082] NET: Registered protocol family 15 [ 0.559220] Key type dns_resolver registered [ 0.559506] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.559544] ThumbEE CPU extension supported. [ 0.559599] Registering SWP/SWPB emulation handler [ 0.560527] registered taskstats version 1 [ 0.562054] slave hdmi.12: modes-blacklisted #0 -> 1920x1080@25 [ 0.562084] slave hdmi.12: modes-blacklisted #1 -> 832x624@75 [ 0.564005] of_get_named_gpio_flags: can't parse gpios property [ 0.564028] tilcdc 4830e000.fb: No power control GPIO [ 0.597542] mmc1: BKOPS_EN bit is not set [ 0.600215] mmc1: new high speed MMC card at address 0001 [ 0.601008] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 0.601359] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 0.601693] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 0.604209] mmcblk0: p1 p2 [ 0.607020] mmcblk0boot1: unknown partition table [ 0.609146] mmcblk0boot0: unknown partition table [ 0.673222] tilcdc 4830e000.fb: found TDA19988 [ 0.674627] tilcdc 4830e000.fb: No connectors reported connected with modes [ 0.692053] Console: switching to colour frame buffer device 128x48 [ 0.706672] tilcdc 4830e000.fb: fb0: frame buffer device [ 0.706693] tilcdc 4830e000.fb: registered panic notifier [ 0.756135] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 0.756166] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 0.757168] libphy: 4a101000.mdio: probed [ 0.757199] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 0.757431] Detected MACID = c8:a0:30:af:cd:d0 [ 0.757545] cpsw 4a100000.ethernet: NAPI disabled [ 0.759104] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 01:10:40 UTC (946689040) [ 0.766384] ALSA device list: [ 0.766409] #0: TI BeagleBone Black [ 0.800557] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 0.800624] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 0.803900] devtmpfs: mounted [ 0.804192] Freeing init memory: 260K [ 1.231542] usb usb1: usb wakeup-resume [ 1.231587] usb usb1: usb auto-resume [ 1.231608] hub 1-0:1.0: hub_resume [ 1.231645] hub 1-0:1.0: port 1: status 0101 change 0001 [ 1.247603] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ; angstrom) [ 1.322439] systemd[1]: Inserted module 'autofs4' [ 1.324097] systemd[1]: Set hostname to . [ 1.334403] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000 [ 1.334453] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 1.439795] usb 1-1: new high-speed USB device number 2 using musb-hdrc [ 1.573764] systemd[1]: Expecting device dev-ttyGS0.device... [ 1.573895] systemd[1]: Expecting device dev-ttyO0.device... [ 1.573974] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 1.574541] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.574665] systemd[1]: Starting Remote File Systems. [ 1.574754] systemd[1]: Reached target Remote File Systems. [ 1.574825] systemd[1]: Starting Delayed Shutdown Socket. [ 1.575024] systemd[1]: Listening on Delayed Shutdown Socket. [ 1.575090] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 1.575242] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 1.575347] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 1.575616] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 1.576119] systemd[1]: Starting udev Kernel Socket. [ 1.576330] systemd[1]: Listening on udev Kernel Socket. [ 1.576850] systemd[1]: Starting udev Control Socket. [ 1.577090] systemd[1]: Listening on udev Control Socket. [ 1.577349] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 1.578031] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.578116] systemd[1]: Starting Swap. [ 1.578191] systemd[1]: Reached target Swap. [ 1.578292] systemd[1]: Starting Journal Socket. [ 1.578796] systemd[1]: Listening on Journal Socket. [ 1.578969] systemd[1]: Starting File System Check on Root Device... [ 1.582066] systemd[1]: Started Machine ID first boot configure. [ 1.585682] systemd[1]: Mounting Debug File System... [ 1.590009] systemd[1]: Starting udev Kernel Device Manager... [ 1.599719] systemd[1]: Mounting POSIX Message Queue File System... [ 1.602752] usb 1-1: default language 0x0409 [ 1.611810] systemd[1]: Starting Load Kernel Modules... [ 1.613598] usb 1-1: udev 2, busnum 1, minor = 1 [ 1.613619] usb 1-1: New USB device found, idVendor=07d1, idProduct=3a09 [ 1.613632] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 1.613644] usb 1-1: Product: 11n adapter [ 1.613655] usb 1-1: Manufacturer: ATHER [ 1.613665] usb 1-1: SerialNumber: 12345 [ 1.614131] usb 1-1: usb_probe_device [ 1.614149] usb 1-1: configuration #1 chosen from 1 choice [ 1.614334] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 1.614999] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 1.615034] hub 1-0:1.0: port 1 enable change, status 00000503 [ 1.627359] systemd[1]: Starting Apply Kernel Variables... [ 1.630795] systemd[1]: Starting Journal Service... [ 1.639648] systemd[1]: Started Journal Service. [ 1.640459] systemd[1]: Starting udev Coldplug all Devices... [ 1.647595] systemd[1]: Mounted Huge Pages File System. [ 1.669207] systemd[1]: Started Set Up Additional Binary Formats. [ 1.770584] Bluetooth: Core ver 2.16 [ 1.770676] NET: Registered protocol family 31 [ 1.770687] Bluetooth: HCI device and connection manager initialized [ 1.770725] Bluetooth: HCI socket layer initialized [ 1.770742] Bluetooth: L2CAP socket layer initialized [ 1.770780] Bluetooth: SCO socket layer initialized [ 1.798914] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.798966] Bluetooth: HIDP socket layer initialized [ 1.805125] systemd-udevd[87]: starting version 196 [ 1.940528] NET: Registered protocol family 10 [ 1.979346] NET: Registered protocol family 23 [ 1.987202] IrCOMM protocol (Dag Brattli) [ 2.049372] Bluetooth: RFCOMM TTY layer initialized [ 2.049461] Bluetooth: RFCOMM socket layer initialized [ 2.049472] Bluetooth: RFCOMM ver 1.11 [ 2.355296] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 2.540184] cfg80211: Calling CRDA to update world regulatory domain [ 2.540245] cfg80211: World regulatory domain updated: [ 2.540255] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2.540266] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2.540276] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2.540286] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2.540296] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2.540305] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.287139] systemd-journald[91]: Received SIGUSR1 [ 3.326996] carl9170 1-1:1.0: usb_probe_interface [ 3.327023] carl9170 1-1:1.0: usb_probe_interface - got id [ 3.379285] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 3.431994] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 3.498447] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 3.593811] usbcore: registered new interface driver carl9170 [ 3.602049] usb 1-1: driver API: 1.9.6 2012-07-07 [1-1] [ 3.602074] usb 1-1: firmware API: 1.9.7 2012-12-15 [ 3.937429] ath: EEPROM regdomain: 0x80d0 [ 3.937446] ath: EEPROM indicates we should expect a country code [ 3.937457] ath: doing EEPROM country->regdmn map search [ 3.937465] ath: country maps to regdmn code: 0x37 [ 3.937474] ath: Country alpha2 being used: DK [ 3.937481] ath: Regpair used: 0x37 [ 4.184561] ieee80211 phy0: Selected rate control algorithm 'pid' [ 4.186170] cfg80211: Calling CRDA for country: DK [ 4.186321] cfg80211: Regulatory domain changed to country: DK [ 4.186332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4.186342] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4.186352] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4.186362] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 4.186371] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 4.186380] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 4.187049] usb 1-1: Atheros AR9170 is registered as 'phy0' [ 5.441769] udc musb-hdrc.0.auto: registering UDC driver [g_multi] [ 5.441875] gadget: using random self ethernet address [ 5.442657] usb0: MAC aa:f5:ab:4c:49:35 [ 5.442671] usb0: HOST MAC c8:a0:30:af:cd:d2 [ 5.448080] gserial_setup: registered 1 ttyGS* device [ 5.448244] lun0: open backing file: /dev/mmcblk0p1 [ 5.451531] gadget: Mass Storage Function, version: 2009/09/11 [ 5.451553] gadget: Number of LUNs=1 [ 5.451576] lun0: LUN: removable file: /dev/mmcblk0p1 [ 5.451587] gadget: I/O thread pid: 278 [ 5.451606] gadget: adding config #1 'Multifunction with RNDIS'/bf9a859c [ 5.451664] gadget: adding 'rndis'/dcc96d40 to config 'Multifunction with RNDIS'/bf9a859c [ 5.451690] rndis_register: configNr = 0 [ 5.451698] rndis_set_param_medium: 0 0 [ 5.451709] gadget: RNDIS: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in [ 5.451724] gadget: adding 'acm'/dcc96c80 to config 'Multifunction with RNDIS'/bf9a859c [ 5.451745] gadget: acm ttyGS0: dual speed IN/ep3in OUT/ep2out NOTIFY/ep4in [ 5.451758] gadget: adding 'Mass Storage Function'/dcc957c0 to config 'Multifunction with RNDIS'/bf9a859c [ 5.451776] gadget: cfg 1/bf9a859c speeds: high full [ 5.451786] gadget: interface 0 = rndis/dcc96d40 [ 5.451796] gadget: interface 1 = rndis/dcc96d40 [ 5.451806] gadget: interface 2 = acm/dcc96c80 [ 5.451815] gadget: interface 3 = acm/dcc96c80 [ 5.451824] gadget: interface 4 = Mass Storage Function/dcc957c0 [ 5.451839] gadget: Multifunction Composite Gadget [ 5.451864] gadget: g_multi ready [ 5.451904] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver [ 5.452260] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2 [ 5.452295] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup [ 5.452366] usb usb2: default language 0x0409 [ 5.452401] usb usb2: udev 1, busnum 2, minor = 128 [ 5.452415] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.452429] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.452441] usb usb2: Product: MUSB HDRC host driver [ 5.452452] usb usb2: Manufacturer: Linux 3.8.13 musb-hcd [ 5.452463] usb usb2: SerialNumber: musb-hdrc.0.auto [ 5.452943] usb usb2: usb_probe_device [ 5.452959] usb usb2: configuration #1 chosen from 1 choice [ 5.452999] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 5.453430] hub 2-0:1.0: usb_probe_interface [ 5.453444] hub 2-0:1.0: usb_probe_interface - got id [ 5.453464] hub 2-0:1.0: USB hub found [ 5.453491] hub 2-0:1.0: 1 port detected [ 5.453503] hub 2-0:1.0: standalone hub [ 5.453513] hub 2-0:1.0: individual port power switching [ 5.453522] hub 2-0:1.0: no over-current protection [ 5.453532] hub 2-0:1.0: Single TT [ 5.453544] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 5.453555] hub 2-0:1.0: power on to power good time: 10ms [ 5.453581] hub 2-0:1.0: local power source is good [ 5.453649] hub 2-0:1.0: enabling power on all ports [ 5.555132] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 5.555194] hub 2-0:1.0: hub_suspend [ 5.555223] usb usb2: bus auto-suspend, wakeup 1 [ 5.611980] CAUTION: musb: Babble Interrupt Occurred [ 6.116217] gadget: suspend [ 6.243311] CAUTION: musb: Babble Interrupt Occurred [ 6.388369] gadget: high-speed config #1: Multifunction with RNDIS [ 6.388431] gadget: init rndis [ 6.388441] gadget: RNDIS RX/TX early activation ... [ 6.388477] usb0: qlen 10 [ 6.388487] gadget: rndis_close [ 6.388496] rndis_set_param_medium: 0 0 [ 6.388514] rndis_set_param_dev: [ 6.388527] gadget: activate acm ttyGS0 [ 6.388543] gadget: acm ttyGS0 serial state 0000 [ 6.388577] gadget: set_config: interface 4 (Mass Storage Function) requested delayed status [ 6.388586] gadget: delayed_status count 1 [ 6.388672] gadget: usb_composite_setup_continue [ 6.388684] gadget: usb_composite_setup_continue: Completing delayed status [ 6.425140] gadget: rndis req21.00 v0000 i0000 l24 [ 6.425189] rndis_msg_parser: RNDIS_MSG_INIT [ 6.425514] gadget: rndis reqa1.01 v0000 i0000 l1052 [ 6.425719] gadget: rndis req21.00 v0000 i0000 l76 [ 6.425777] gen_ndis_query_resp: RNDIS_OID_802_3_PERMANENT_ADDRESS [ 6.425890] gadget: rndis reqa1.01 v0000 i0000 l1052 [ 6.435386] gadget: rndis req21.00 v0000 i0000 l32 [ 6.435431] gen_ndis_set_resp: RNDIS_OID_GEN_CURRENT_PACKET_FILTER 0000002d [ 6.435711] gadget: rndis reqa1.01 v0000 i0000 l1052 [ 6.594351] usb0: eth_open [ 6.594373] usb0: eth_start [ 6.594506] gadget: rndis_open [ 6.594518] rndis_set_param_medium: 0 4259840 [ 6.726446] gadget: sending command-failure status [ 7.905143] usb0: stop stats: rx/tx 1/5, errs 0/0 [ 7.905168] gadget: rndis_close [ 7.905178] rndis_set_param_medium: 0 0 [ 7.905233] usb0: host still using in/out endpoints [ 8.042073] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.367508] net eth0: initializing cpsw version 1.12 (0) [ 8.381025] net eth0: phy found : id is : 0x7c0f1 [ 8.383142] libphy: PHY 4a101000.mdio:01 not found [ 8.388236] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 8.450992] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.088984] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.295246] usb 1-1: no command feedback received (-110). [ 10.300917] carl9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P.. [ 10.300940] usb 1-1: restart device (6) [ 10.304988] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 11.320636] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 12.043560] gs_open: start ttyGS0 [ 12.043628] gs_open: ttyGS0 (d92f2400,df5a3540) [ 12.059015] gs_close: ttyGS0 (d92f2400,df5a3540) ... [ 12.059040] gs_close: ttyGS0 (d92f2400,df5a3540) done! [ 12.060897] gs_open: start ttyGS0 [ 12.060921] gs_open: ttyGS0 (d92f2400,dcc50740) [ 12.061033] gs_close: ttyGS0 (d92f2400,dcc50740) ... [ 12.061047] gs_close: ttyGS0 (d92f2400,dcc50740) done! [ 12.162419] gs_open: start ttyGS0 [ 12.162446] gs_open: ttyGS0 (d92f2400,dcd15300) [ 12.162577] gs_close: ttyGS0 (d92f2400,dcd15300) ... [ 12.162592] gs_close: ttyGS0 (d92f2400,dcd15300) done! [ 12.165525] gs_open: start ttyGS0 [ 12.165551] gs_open: ttyGS0 (d92f2400,dcd75a40) [ 12.334291] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 13.347969] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 14.361599] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 15.367452] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 16.373367] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 17.388921] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 18.394865] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 19.406506] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 20.412619] ieee80211 phy0: reading regs failed (-110) [ 21.416345] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 22.428053] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 23.439794] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 24.451480] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 25.471496] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 26.492496] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 27.506106] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 28.513916] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 29.354090] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=0 [ 29.521817] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 29.653178] libphy: 4a101000.mdio:00 - Link is Up - 100/Full [ 29.653241] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 30.535482] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 31.547129] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 32.556944] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 33.564720] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 34.572529] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 35.580405] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 36.596007] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 37.603789] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 38.611591] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 39.619391] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 40.627234] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 41.635047] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 42.650890] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 43.113215] fuse init (API version 7.20) [ 43.670243] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 44.689712] ieee80211 phy0: writing reg 0x1c36f0 (val 0x2400) failed (-110) [ 45.697595] ieee80211 phy0: reading regs failed (-110) [ 46.701455] ieee80211 phy0: writing reg 0x1c36f0 (val 0x5000) failed (-110) [ 47.719020] ------------[ cut here ]------------ [ 47.719097] WARNING: at drivers/net/wireless/ath/carl9170/main.c:247 carl9170_flush+0x84/0x8c [carl9170]() [ 47.719107] Modules linked in: fuse ip_tables x_tables g_multi libcomposite arc4 carl9170 ath mac80211 cfg80211 rfcomm ircomm_tty ircomm irda ipv6 hidp bluetooth rfkill autofs4 [ 47.719211] [] (unwind_backtrace+0x1/0x8c) from [] (warn_slowpath_common+0x33/0x48) [ 47.719230] [] (warn_slowpath_common+0x33/0x48) from [] (warn_slowpath_null+0xf/0x10) [ 47.719258] [] (warn_slowpath_null+0xf/0x10) from [] (carl9170_flush+0x84/0x8c [carl9170]) [ 47.719305] [] (carl9170_flush+0x84/0x8c [carl9170]) from [] (carl9170_op_flush+0x56/0x60 [carl9170]) [ 47.719544] [] (carl9170_op_flush+0x56/0x60 [carl9170]) from [] (__ieee80211_recalc_idle+0x144/0x16a [mac80211]) [ 47.719698] [] (__ieee80211_recalc_idle+0x144/0x16a [mac80211]) from [] (ieee80211_recalc_idle+0x14/0x28 [mac80211]) [ 47.719830] [] (ieee80211_recalc_idle+0x14/0x28 [mac80211]) from [] (__ieee80211_scan_completed+0xdc/0x10e [mac80211]) [ 47.719957] [] (__ieee80211_scan_completed+0xdc/0x10e [mac80211]) from [] (ieee80211_scan_work+0x2c0/0x2d0 [mac80211]) [ 47.720034] [] (ieee80211_scan_work+0x2c0/0x2d0 [mac80211]) from [] (process_one_work+0x161/0x24c) [ 47.720053] [] (process_one_work+0x161/0x24c) from [] (worker_thread+0x189/0x244) [ 47.720076] [] (worker_thread+0x189/0x244) from [] (kthread+0x61/0x72) [ 47.720100] [] (kthread+0x61/0x72) from [] (ret_from_fork+0x11/0x34) [ 47.720111] ---[ end trace fede32f6539f1db0 ]--- [ 48.719072] ieee80211 phy0: writing reg 0x1d0104 (val 0x1) failed (-110) [ 51.731730] ------------[ cut here ]------------ [ 51.731773] WARNING: at drivers/usb/musb/musb_host.c:125 musb_h_tx_flush_fifo+0x35/0x5c() [ 51.731783] Could not flush host TX10 fifo: csr: 2003 [ 51.731792] Modules linked in: fuse ip_tables x_tables g_multi libcomposite arc4 carl9170 ath mac80211 cfg80211 rfcomm ircomm_tty ircomm irda ipv6 hidp bluetooth rfkill autofs4 [ 51.731894] [] (unwind_backtrace+0x1/0x8c) from [] (warn_slowpath_common+0x33/0x48) [ 51.731912] [] (warn_slowpath_common+0x33/0x48) from [] (warn_slowpath_fmt+0x1b/0x24) [ 51.731929] [] (warn_slowpath_fmt+0x1b/0x24) from [] (musb_h_tx_flush_fifo+0x35/0x5c) [ 51.731949] [] (musb_h_tx_flush_fifo+0x35/0x5c) from [] (musb_cleanup_urb+0x25/0x52) [ 51.731965] [] (musb_cleanup_urb+0x25/0x52) from [] (musb_urb_dequeue+0x9b/0xb2) [ 51.731983] [] (musb_urb_dequeue+0x9b/0xb2) from [] (unlink1+0x7f/0x8c) [ 51.732000] [] (unlink1+0x7f/0x8c) from [] (usb_hcd_unlink_urb+0x39/0x74) [ 51.732017] [] (usb_hcd_unlink_urb+0x39/0x74) from [] (usb_kill_urb+0x3b/0x9e) [ 51.732033] [] (usb_kill_urb+0x3b/0x9e) from [] (usb_kill_anchored_urbs+0x21/0x3c) [ 51.732093] [] (usb_kill_anchored_urbs+0x21/0x3c) from [] (carl9170_usb_flush+0x60/0x6a [carl9170]) [ 51.732141] [] (carl9170_usb_flush+0x60/0x6a [carl9170]) from [] (carl9170_usb_stop+0x2a/0x70 [carl9170]) [ 51.732184] [] (carl9170_usb_stop+0x2a/0x70 [carl9170]) from [] (carl9170_usb_restart+0x26/0x66 [carl9170]) [ 51.732223] [] (carl9170_usb_restart+0x26/0x66 [carl9170]) from [] (carl9170_restart_work+0x32/0x94 [carl9170]) [ 51.732253] [] (carl9170_restart_work+0x32/0x94 [carl9170]) from [] (process_one_work+0x161/0x24c) [ 51.732272] [] (process_one_work+0x161/0x24c) from [] (worker_thread+0x189/0x244) [ 51.732294] [] (worker_thread+0x189/0x244) from [] (kthread+0x61/0x72) [ 51.732318] [] (kthread+0x61/0x72) from [] (ret_from_fork+0x11/0x34) [ 51.732329] ---[ end trace fede32f6539f1db1 ]--- [ 51.732554] usb 1-1: kill pending tx urbs. [ 53.088236] usb 1-1: kworker/u:1 timed out on ep0out len=0/4096 [ 53.088263] usb 1-1: firmware upload failed (-110). [ 54.092046] usb 1-1: stuck tx urbs! [ 54.097432] usb 1-1: Failed to restart device (-110). [ 55.103742] ------------[ cut here ]------------ [ 55.103818] WARNING: at drivers/net/wireless/ath/carl9170/main.c:247 carl9170_flush+0x84/0x8c [carl9170]() [ 55.103828] Modules linked in: fuse ip_tables x_tables g_multi libcomposite arc4 carl9170 ath mac80211 cfg80211 rfcomm ircomm_tty ircomm irda ipv6 hidp bluetooth rfkill autofs4 [ 55.103932] [] (unwind_backtrace+0x1/0x8c) from [] (warn_slowpath_common+0x33/0x48) [ 55.103951] [] (warn_slowpath_common+0x33/0x48) from [] (warn_slowpath_null+0xf/0x10) [ 55.103978] [] (warn_slowpath_null+0xf/0x10) from [] (carl9170_flush+0x84/0x8c [carl9170]) [ 55.104017] [] (carl9170_flush+0x84/0x8c [carl9170]) from [] (carl9170_zap_queues+0x1b0/0x1be [carl9170]) [ 55.104054] [] (carl9170_zap_queues+0x1b0/0x1be [carl9170]) from [] (carl9170_restart_work+0x5e/0x94 [carl9170]) [ 55.104084] [] (carl9170_restart_work+0x5e/0x94 [carl9170]) from [] (process_one_work+0x161/0x24c) [ 55.104103] [] (process_one_work+0x161/0x24c) from [] (worker_thread+0x189/0x244) [ 55.104126] [] (worker_thread+0x189/0x244) from [] (kthread+0x61/0x72) [ 55.104150] [] (kthread+0x61/0x72) from [] (ret_from_fork+0x11/0x34) [ 55.104161] ---[ end trace fede32f6539f1db2 ]--- [ 55.104288] carl9170 1-1:1.0: forced unbind [ 55.178186] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 55.230744] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 60.230743] usb 1-1: kworker/0:1 timed out on ep0in len=0/64 [ 65.230743] usb 1-1: kworker/0:1 timed out on ep0in len=0/64 [ 70.230738] usb 1-1: kworker/0:1 timed out on ep0in len=0/64 [ 70.283496] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 70.336181] usb 1-1: device descriptor read/64, error -110 [ 75.443639] usb 1-1: kworker/0:1 timed out on ep0in len=0/64 [ 80.443684] usb 1-1: kworker/0:1 timed out on ep0in len=0/64 [ 85.443646] usb 1-1: kworker/0:1 timed out on ep0in len=0/64 [ 85.496390] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 85.549079] usb 1-1: device descriptor read/64, error -110 [ 85.709236] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 85.761964] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 90.761990] usb 1-1: kworker/0:1 timed out on ep0in len=0/64 [ 95.761984] usb 1-1: kworker/0:1 timed out on ep0in len=0/64 [ 100.761999] usb 1-1: kworker/0:1 timed out on ep0in len=0/64 [ 100.814743] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 100.867438] usb 1-1: device descriptor read/64, error -110 [ 105.974873] usb 1-1: kworker/0:1 timed out on ep0in len=0/64 [ 110.974879] usb 1-1: kworker/0:1 timed out on ep0in len=0/64 [ 115.974882] usb 1-1: kworker/0:1 timed out on ep0in len=0/64 [ 116.027673] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 116.080326] usb 1-1: device descriptor read/64, error -110 [ 116.240486] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 116.293215] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 121.293243] usb 1-1: kworker/0:1 timed out on ep0out len=0/0 [ 126.496355] usb 1-1: kworker/0:1 timed out on ep0out len=0/0 [ 126.699452] usb 1-1: device not accepting address 2, error -110 [ 126.760031] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 126.812748] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 131.812766] usb 1-1: kworker/0:1 timed out on ep0out len=0/0 [ 137.016120] usb 1-1: kworker/0:1 timed out on ep0out len=0/0 [ 137.218981] usb 1-1: device not accepting address 2, error -110 [ 137.226437] hub 1-0:1.0: logical disconnect on port 1 [ 137.226498] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0002 [ 137.226538] hub 1-0:1.0: port 1, status 0501, change 0002, 480 Mb/s [ 137.226554] usb 1-1: USB disconnect, device number 2 [ 137.226589] usb 1-1: unregistering device [ 137.226602] usb 1-1: unregistering interface 1-1:1.0 [ 137.227174] usb 1-1: usb_disable_device nuking all URBs [ 137.336174] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 [ 137.441635] usb 1-1: new high-speed USB device number 3 using musb-hdrc [ 142.441676] usb 1-1: khubd timed out on ep0in len=0/64 [ 147.441682] usb 1-1: khubd timed out on ep0in len=0/64 [ 152.441670] usb 1-1: khubd timed out on ep0in len=0/64 [ 152.547111] usb 1-1: device descriptor read/64, error -110 [ 157.654565] usb 1-1: khubd timed out on ep0in len=0/64 [ 162.654558] usb 1-1: khubd timed out on ep0in len=0/64 [ 167.654577] usb 1-1: khubd timed out on ep0in len=0/64 [ 167.760007] usb 1-1: device descriptor read/64, error -110 [ 167.972889] usb 1-1: new high-speed USB device number 4 using musb-hdrc [ 172.972912] usb 1-1: khubd timed out on ep0in len=0/64 [ 177.972924] usb 1-1: khubd timed out on ep0in len=0/64 [ 182.972924] usb 1-1: khubd timed out on ep0in len=0/64 [ 183.078364] usb 1-1: device descriptor read/64, error -110 [ 188.185810] usb 1-1: khubd timed out on ep0in len=0/64 [ 193.185807] usb 1-1: khubd timed out on ep0in len=0/64 [ 198.185813] usb 1-1: khubd timed out on ep0in len=0/64 [ 198.291254] usb 1-1: device descriptor read/64, error -110 [ 198.504135] usb 1-1: new high-speed USB device number 5 using musb-hdrc [ 203.504169] usb 1-1: khubd timed out on ep0out len=0/0 [ 208.707294] usb 1-1: khubd timed out on ep0out len=0/0 [ 208.910387] usb 1-1: device not accepting address 5, error -110 [ 209.021908] usb 1-1: new high-speed USB device number 6 using musb-hdrc [ 214.021759] usb 1-1: khubd timed out on ep0out len=0/0 [ 219.224873] usb 1-1: khubd timed out on ep0out len=0/0 [ 219.427965] usb 1-1: device not accepting address 6, error -110 [ 219.434786] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 219.442441] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 219.442472] hub 1-0:1.0: port 1 enable change, status 00000501 [ 219.442543] hub 1-0:1.0: hub_suspend [ 219.442568] usb usb1: bus auto-suspend, wakeup 1