U-Boot SPL 2023.04-g93735daa (Jul 08 2024 - 21:45:03 +0000) SYSFW ABI: 3.1 (firmware rev 0x000a '10.0.1--v10.00.01 (Fiery Fox)') SPL initial stack usage: 17048 bytes Trying to boot from MMC2 Authentication passed Authentication passed Authentication passed Authentication passed Authentication passed Starting ATF on ARM64 core... NOTICE: BL31: v2.11.0(release):4b9be5a NOTICE: BL31: Built : 21:45:03, Jul 8 2024 I/TC: I/TC: OP-TEE version: 4.3.0-rc1 (gcc version 12.2.0 (Debian 12.2.0-14)) #1 Mon J ul 8 21:45:03 UTC 2024 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/ porting_guidelines.html I/TC: Primary CPU initializing I/TC: GIC redistributor base address not provided I/TC: Assuming default GIC group status and modifier I/TC: SYSFW ABI: 3.1 (firmware rev 0x000a '10.0.1--v10.00.01 (Fiery Fox)') I/TC: HUK Initialized I/TC: Primary CPU switching to normal world boot U-Boot SPL 2023.04-g93735daa (Jul 08 2024 - 21:45:03 +0000) SYSFW ABI: 3.1 (firmware rev 0x000a '10.0.1--v10.00.01 (Fiery Fox)') Trying to boot from MMC2 Authentication passed Authentication passed U-Boot 2023.04-g93735daa (Jul 08 2024 - 21:45:03 +0000) SoC: J722S SR1.0 HS-FS Model: BeagleBoard.org BeagleY-AI DRAM: 2 GiB (effective 4 GiB) Core: 104 devices, 28 uclasses, devicetree: separate MMC: mmc@fa00000: 1, mmc@fa20000: 2 Loading Environment from nowhere... OK In: serial@2800000 Out: serial@2800000 Err: serial@2800000 Net: eth0: ethernet@8000000port@1 Press SPACE to abort autoboot in 2 seconds switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 Failed to load 'boot.scr' Failed to load 'uEnv.txt' MMC Device 0 not found no mmc device at slot 0 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf BeagleY-AI microSD (extlinux.conf) (swap enabled) 1: microSD (production test) 2: transfer microSD rootfs to NVMe (advanced) 3: microSD (debug) 4: microSD (default) Enter choice: 4: microSD (default) Retrieving file: /Image append: console=ttyS2,115200n8 root=/dev/mmcblk1p3 ro rootfstype=ext4 resume=/dev/mmcblk1p2 rootwait net.ifnames=0 quiet Retrieving file: /ti/k3-am67a-beagley-ai.dtb ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 Loading Device Tree to 000000008ffe4000, end 000000008ffff1e4 ... OK Working FDT set to 8ffe4000 Starting kernel ... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Reserved shared memory is enabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled [ 1.295093] rtc-ds1307 2-0068: hctosys: unable to read the hardware clock [ 1.506913] omap8250 2860000.serial: Failed to create device link (0x180) with regulator-3 [ 2.676382] debugfs: Directory 'pd:249' with parent 'pm_genpd' already present! [ 2.683777] debugfs: Directory 'pd:248' with parent 'pm_genpd' already present! [ 2.691111] debugfs: Directory 'pd:247' with parent 'pm_genpd' already present! [ 2.698652] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 2.706026] debugfs: Directory 'pd:244' with parent 'pm_genpd' already present! [ 2.715418] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 2.722791] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 2.755296] mmc1: error -110 whilst initialising SD card [ 2.860072] mmc1: error -110 whilst initialising SD card [ 2.969252] mmc1: error -110 whilst initialising SD card [ 3.088620] mmc1: error -110 whilst initialising SD card U-Boot SPL 2023.04-g93735daa (Jul 08 2024 - 21:45:03 +0000) SYSFW ABI: 3.1 (firmware rev 0x000a '10.0.1--v10.00.01 (Fiery Fox)') SPL initial stack usage: 17048 bytes Trying to boot from MMC2 Authentication passed Authentication passed Authentication passed Authentication passed Authentication passed Starting ATF on ARM64 core... NOTICE: BL31: v2.11.0(release):4b9be5a NOTICE: BL31: Built : 21:45:03, Jul 8 2024 I/TC: I/TC: OP-TEE version: 4.3.0-rc1 (gcc version 12.2.0 (Debian 12.2.0-14)) #1 Mon J ul 8 21:45:03 UTC 2024 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/ porting_guidelines.html I/TC: Primary CPU initializing I/TC: GIC redistributor base address not provided I/TC: Assuming default GIC group status and modifier I/TC: SYSFW ABI: 3.1 (firmware rev 0x000a '10.0.1--v10.00.01 (Fiery Fox)') I/TC: HUK Initialized I/TC: Primary CPU switching to normal world boot U-Boot SPL 2023.04-g93735daa (Jul 08 2024 - 21:45:03 +0000) SYSFW ABI: 3.1 (firmware rev 0x000a '10.0.1--v10.00.01 (Fiery Fox)') Trying to boot from MMC2 Authentication passed Authentication passed U-Boot 2023.04-g93735daa (Jul 08 2024 - 21:45:03 +0000) SoC: J722S SR1.0 HS-FS Model: BeagleBoard.org BeagleY-AI DRAM: 2 GiB (effective 4 GiB) Core: 104 devices, 28 uclasses, devicetree: separate MMC: mmc@fa00000: 1, mmc@fa20000: 2 Loading Environment from nowhere... OK In: serial@2800000 Out: serial@2800000 Err: serial@2800000 Net: eth0: ethernet@8000000port@1 Press SPACE to abort autoboot in 2 seconds switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 Failed to load 'boot.scr' Failed to load 'uEnv.txt' MMC Device 0 not found no mmc device at slot 0 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf BeagleY-AI microSD (extlinux.conf) (swap enabled) 1: microSD (production test) 2: transfer microSD rootfs to NVMe (advanced) 3: microSD (debug) 4: microSD (default) Enter choice: 4: microSD (default) Retrieving file: /Image append: console=ttyS2,115200n8 root=/dev/mmcblk1p3 ro rootfstype=ext4 resume=/dev/mmcblk1p2 rootwait net.ifnames=0 quiet Retrieving file: /ti/k3-am67a-beagley-ai.dtb ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 Loading Device Tree to 000000008ffe4000, end 000000008ffff1e4 ... OK Working FDT set to 8ffe4000 Starting kernel ... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Reserved shared memory is enabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled [ 1.295093] rtc-ds1307 2-0068: hctosys: unable to read the hardware clock [ 1.506913] omap8250 2860000.serial: Failed to create device link (0x180) with regulator-3 [ 2.676382] debugfs: Directory 'pd:249' with parent 'pm_genpd' already present! [ 2.683777] debugfs: Directory 'pd:248' with parent 'pm_genpd' already present! [ 2.691111] debugfs: Directory 'pd:247' with parent 'pm_genpd' already present! [ 2.698652] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 2.706026] debugfs: Directory 'pd:244' with parent 'pm_genpd' already present! [ 2.715418] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 2.722791] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 2.755296