picocom v3.1 port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no hangup is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, logfile is : none initstring : none exit_after is : not set exit is : no Type [C-a] [C-h] to see available commands Terminal ready U-Boot SPL 2018.09-00002-g58a2108e52 (Jan 06 2019 - 10:12:41 -0600) Trying to boot from MMC2 Loading Environment from EXT4... OK U-Boot 2018.09-00002-g58a2108e52 (Jan 06 2019 - 10:12:41 -0600), Build: jenkins-github_Bootloader-Builder-95 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... OK Board: BeagleBone Black BeagleBone Black: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds board_name=[A335BNLT] ... board_rev=[00C0] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 2134 bytes read in 58 ms (35.2 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.18.20-bone16 ... 6582784 bytes read in 508 ms (12.4 MiB/s) debug: [enable_uboot_overlays=1] ... debug: [enable_uboot_cape_universal=1] ... debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ... loading /boot/dtbs/4.18.20-bone16/am335x-boneblack-uboot-univ.dtb ... 158293 bytes read in 94 ms (1.6 MiB/s) uboot_overlays: [fdt_buffer=0x60000] ... uboot_overlays: uboot loading of [/lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_emmc=1]... uboot_overlays: uboot loading of [/lib/firmware/BB-HDMI-TDA998x-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_video=1]... uboot_overlays: uboot loading of [/lib/firmware/BB-ADC-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_adc=1]... uboot_overlays: loading /lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo ... 3513 bytes read in 184 ms (18.6 KiB/s) loading /boot/initrd.img-4.18.20-bone16 ... 4748142 bytes read in 398 ms (11.4 MiB/s) debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0] ... debug: [bootz 0x82000000 0x88080000:48736e 88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fb78000, end 8ffff36e ... OK reserving fdt memory region: addr=88000000 size=88000 Loading Device Tree to 8faed000, end 8fb77fff ... OK Starting kernel ... #### Booting Linux on physical CPU 0x0 #### Linux version 4.18.20-bone16 (root@z370-dhlii) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05)) #1xross PREEMPT Fri Jan 25 15:45:42 EST 2019 #### CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d #### CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache #### OF: fdt: Machine model: TI AM335x BeagleBone Black #### Memory policy: Data cache writeback #### efi: Getting EFI parameters from FDT: #### efi: UEFI not found. #### cma: Reserved 48 MiB at 0x9d000000 #### CPU: All CPU(s) started in SVC mode. #### AM335X ES2.1 (sgx neon) #### random: get_random_bytes called from start_kernel+0x7b/0x3f8 with crng_init=0 #### Built 1 zonelists, mobility grouping on. Total pages: 129920 #### Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 #### Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) #### Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) #### Memory: 452008K/524288K available (6144K kernel code, 719K rwdata, 3084K rodata, 1024K init, 283K bss, 23128K reserved, 49152K cma-reserved, 0K highmem) #### Virtual kernel memory layout: #### vector : 0xffff0000 - 0xffff1000 ( 4 kB) #### fixmap : 0xffc00000 - 0xfff00000 (3072 kB) #### vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) #### lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) #### pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) #### modules : 0xbf800000 - 0xbfe00000 ( 6 MB) #### .text : 0x(ptrval) - 0x(ptrval) (7136 kB) #### .init : 0x(ptrval) - 0x(ptrval) (1024 kB) #### .data : 0x(ptrval) - 0x(ptrval) ( 720 kB) #### .bss : 0x(ptrval) - 0x(ptrval) ( 284 kB) #### SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 #### ftrace: allocating 31087 entries in 61 pages #### Preemptible hierarchical RCU implementation. #### Tasks RCU enabled. #### NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 #### IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts #### OMAP clockevent source: timer2 at 24000000 Hz #### sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns #### clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns #### OMAP clocksource: timer1 at 24000000 Hz #### timer_probe: no matching timers found #### Console: colour dummy device 80x30 #### WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' #### This ensures that you still see kernel messages. Please #### update your kernel commandline. #### Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) #### pid_max: default: 32768 minimum: 301 #### Security Framework initialized #### Yama: becoming mindful. #### AppArmor: AppArmor initialized #### Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) #### Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) #### CPU: Testing write buffer coherency: ok #### CPU0: Spectre v2: using BPIALL workaround #### Setting up static identity map for 0x80100000 - 0x80100054 #### Hierarchical SRCU implementation. #### EFI services will not be available. #### devtmpfs: initialized #### VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 #### clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns #### futex hash table entries: 256 (order: -1, 3072 bytes) #### pinctrl core: initialized pinctrl subsystem #### DMI not present or invalid. #### NET: Registered protocol family 16 #### DMA: preallocated 1024 KiB pool for atomic coherent allocations #### l4_wkup_cm:clk:0010:0: failed to disable #### audit: initializing netlink subsys (disabled) #### audit: type=2000 audit(0.156:1): state=initialized audit_enabled=0 res=1 #### cpuidle: using governor menu #### OMAP GPIO hardware version 0.1 #### No ATAGs? #### hw-breakpoint: debug architecture 0x4 unsupported. #### edma 49000000.edma: TI EDMA DMA engine driver #### SCSI subsystem initialized #### usbcore: registered new interface driver usbfs #### usbcore: registered new interface driver hub #### usbcore: registered new device driver usb #### omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe #### omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz #### omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz #### pps_core: LinuxPPS API ver. 1 registered #### pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti #### PTP clock support registered #### omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 #### NetLabel: Initializing #### NetLabel: domain hash size = 128 #### NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO #### NetLabel: unlabeled traffic allowed by default #### clocksource: Switched to clocksource timer1 #### VFS: Disk quotas dquot_6.6.0 #### VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) #### AppArmor: AppArmor Filesystem Enabled #### NET: Registered protocol family 2 #### tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) #### TCP established hash table entries: 4096 (order: 2, 16384 bytes) #### TCP bind hash table entries: 4096 (order: 2, 16384 bytes) #### TCP: Hash tables configured (established 4096 bind 4096) #### UDP hash table entries: 256 (order: 0, 4096 bytes) #### UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) #### NET: Registered protocol family 1 #### Unpacking initramfs... #### Freeing initrd memory: 4640K #### hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available #### Initialise system trusted keyrings #### workingset: timestamp_bits=14 max_order=17 bucket_order=3 #### zbud: loaded #### squashfs: version 4.0 (2009/01/31) Phillip Lougher #### Key type asymmetric registered #### Asymmetric key parser 'x509' registered #### Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) #### io scheduler noop registered #### io scheduler deadline registered #### io scheduler cfq registered (default) #### io scheduler mq-deadline registered #### pinctrl-single 44e10800.pinmux: 142 pins, size 568 #### gpio-of-helper ocp:cape-universal: ready #### wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle #### Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled #### 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 #### 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 31, base_baud = 3000000) is a 8250 #### 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 32, base_baud = 3000000) is a 8250 #### 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 33, base_baud = 3000000) is a 8250 #### 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 34, base_baud = 3000000) is a 8250 #### random: fast init done #### console [ttyS0] enabled #### 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 35, base_baud = 3000000) is a 8250 #### omap_rng 48310000.rng: Random Number Generator ver. 20 #### eqep 48300180.eqep: ver. 1.0 #### eqep 48300180.eqep: count_mode:0 #### eqep 48300180.eqep: invert_qa:1 #### eqep 48300180.eqep: invert_qb:1 #### eqep 48300180.eqep: invert_qi:0 #### eqep 48300180.eqep: invert_qs:0 #### eqep 48300180.eqep: swap_inputs:0 #### eqep 48300180.eqep: QDECCTL:0x0180 #### eqep 48300180.eqep: QPOSINIT:0x00000000 #### eqep 48300180.eqep: QPOSMAX:0xffffffff #### eqep 48300180.eqep: QPOSCNT:0x00000000 #### eqep 48300180.eqep: omit_interrupt:0 #### eqep 48300180.eqep: QEINT:0x0800 #### eqep 48300180.eqep: QUPRD:0x05f5e100 #### eqep 48300180.eqep: QEPCTL:0x009e write #### eqep 48300180.eqep: QEPCTL:0x009e read #### eqep 48300180.eqep: irq:131, clk_rate:100000000 #### eqep 48302180.eqep: ver. 1.0 #### eqep 48302180.eqep: count_mode:0 #### eqep 48302180.eqep: invert_qa:1 #### eqep 48302180.eqep: invert_qb:1 #### eqep 48302180.eqep: invert_qi:0 #### eqep 48302180.eqep: invert_qs:0 #### eqep 48302180.eqep: swap_inputs:0 #### eqep 48302180.eqep: QDECCTL:0x0180 #### eqep 48302180.eqep: QPOSINIT:0x00000000 #### eqep 48302180.eqep: QPOSMAX:0xffffffff #### eqep 48302180.eqep: QPOSCNT:0x00000000 #### eqep 48302180.eqep: omit_interrupt:0 #### eqep 48302180.eqep: QEINT:0x0800 #### eqep 48302180.eqep: QUPRD:0x05f5e100 #### eqep 48302180.eqep: QEPCTL:0x009e write #### eqep 48302180.eqep: QEPCTL:0x009e read #### eqep 48302180.eqep: irq:133, clk_rate:100000000 #### eqep 48304180.eqep: ver. 1.0 #### eqep 48304180.eqep: count_mode:0 #### eqep 48304180.eqep: invert_qa:1 #### eqep 48304180.eqep: invert_qb:1 #### eqep 48304180.eqep: invert_qi:0 #### eqep 48304180.eqep: invert_qs:0 #### eqep 48304180.eqep: swap_inputs:0 #### eqep 48304180.eqep: QDECCTL:0x0180 #### eqep 48304180.eqep: QPOSINIT:0x00000000 #### eqep 48304180.eqep: QPOSMAX:0xffffffff #### eqep 48304180.eqep: QPOSCNT:0x00000000 #### eqep 48304180.eqep: omit_interrupt:0 #### eqep 48304180.eqep: QEINT:0x0800 #### eqep 48304180.eqep: QUPRD:0x05f5e100 #### eqep 48304180.eqep: QEPCTL:0x009e write #### eqep 48304180.eqep: QEPCTL:0x009e read #### eqep 48304180.eqep: irq:135, clk_rate:100000000 #### libphy: Fixed MDIO Bus: probed #### davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 #### davinci_mdio 4a101000.mdio: detected phy mask fffffffe #### davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe] #### libphy: 4a101000.mdio: probed #### davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 #### cpsw 4a100000.ethernet: Detected MACID = 60:64:05:6f:e0:04 #### cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 #### cpsw 4a100000.ethernet: ALE Table size 1024 #### cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies) #### ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver #### ehci-platform: EHCI generic platform driver #### ehci-omap: OMAP-EHCI Host Controller driver #### usbcore: registered new interface driver usb-storage #### omap_rtc 44e3e000.rtc: registered as rtc0 #### i2c /dev entries driver #### omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec #### softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) #### omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) #### omap_hsmmc 48060000.mmc: Got CD GPIO #### ledtrig-cpu: registered to indicate activity on CPUs #### omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 #### omap-aes 53500000.aes: will run requests pump with realtime priority #### omap-sham 53100000.sham: hw accel on OMAP rev 4.3 #### hidraw: raw HID events driver (C) Jiri Kosina #### usbcore: registered new interface driver usbhid #### usbhid: USB HID core driver #### remoteproc remoteproc0: wkup_m3 is available #### wireguard: WireGuard 0.0.20181218 loaded. See www.wireguard.com for information. #### wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld . All Rights Reserved. #### NET: Registered protocol family 10 #### mmc0: host does not support reading read-only switch, assuming write-enable #### mmc0: new high speed SDHC card at address 1234 #### mmcblk0: mmc0:1234 SA08G 7.29 GiB #### mmcblk0: p1 #### Segment Routing with IPv6 #### mip6: Mobile IPv6 #### NET: Registered protocol family 17 #### Key type dns_resolver registered #### mpls_gso: MPLS GSO support #### ThumbEE CPU extension supported. #### Registering SWP/SWPB emulation handler #### omap_voltage_late_init: Voltage driver support not added #### registered taskstats version 1 #### Loading compiled-in X.509 certificates #### zswap: loaded using pool lzo/zbud #### AppArmor: AppArmor sha1 policy hashing enabled #### tps65217 0-0024: TPS65217 ID 0xe version 1.2 #### at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write #### omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz #### remoteproc remoteproc0: powering up wkup_m3 #### remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168 #### omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) #### remoteproc remoteproc0: remote processor wkup_m3 is now up #### wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193 #### Freeing unused kernel memory: 1024K Loading, please wait... starting version 232 #### random: systemd-udevd: uninitialized urandom read (16 bytes read) #### random: systemd-udevd: uninitialized urandom read (16 bytes read) #### random: udevadm: uninitialized urandom read (16 bytes read) Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.29.2 [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1 rootfs: clean, 127123/475776 files, 844450/1908736 blocks done. #### EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. #### systemd[1]: System time before build time, advancing clock. #### systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) #### systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 9 (stretch)! #### systemd[1]: Set hostname to . #### systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. #### systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. #### systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. #### systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. #### systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. #### systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. #### systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Reached target Slices. [ OK ] Listening on Syslog Socket. [ OK ] Created slice system-getty.slice. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Encrypted Volumes. [ OK ] Reached target Paths. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Listening on fsck to fsckd communication Socket. [ OK ] Listening on udev Control Socket. [ OK ] Listening on Journal Audit Socket. Mounting /sys/kernel/debug... [ OK ] Listening on Journal Socket. Starting Journal Service... Starting Load Kernel Modules... Starting Create list of required st…ce nodes for the current kernel... Starting Set the console keyboard layout... Starting Remount Root and Kernel File Systems... [ OK ] Reached target Swap. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. #### EXT4-fs (mmcblk0p1): Filesystem with huge files cannot be mounted RDWR without CONFIG_LBDAF [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted /sys/kernel/debug. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [DEPEND] Dependency failed for robotcontrol. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [FAILED] Failed to start Remount Root and Kernel File Systems. See 'systemctl status systemd-remount-fs.service' for details. Starting Load/Save Random Seed... Starting udev Coldplug all Devices... Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... Mounting Configuration File System... [ OK ] Started Load/Save Random Seed. [ OK ] Started Apply Kernel Variables. [ OK ] Mounted Configuration File System. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Set the console keyboard layout. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Set console font and keymap... Starting Raise network interfaces... [ OK ] Started Set console font and keymap. [ OK ] Started udev Coldplug all Devices. [ OK ] Started Raise network interfaces. #### systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... #### systemd-journald[865]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [FAILED] Failed to start Create Volatile Files and Directories. See 'systemctl status systemd-tmpfiles-setup.service' for details. Starting Update UTMP about System Boot/Shutdown... [FAILED] Failed to start Entropy daemon using the HAVEGE algorithm. See 'systemctl status haveged.service' for details. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Reached target System Time Synchronized. [FAILED] Failed to start Update UTMP about System Boot/Shutdown. See 'systemctl status systemd-update-utmp.service' for details. [DEPEND] Dependency failed for Update UTMP about System Runlevel Changes. [ OK ] Stopped Network Time Synchronization. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Reached target System Initialization. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Started Daily apt download activities. [ OK ] Listening on node-red.socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on bonescript.socket. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Listening on cloud9.socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Avahi mDNS/DNS-SD Stack... Starting BB WL18xx wlan0 Service... Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... [ OK ] Started Bonescript autorun. Starting System Logging Service... Starting rc_battery_monitor... Starting LSB: Start daemon at boot time... Starting LSB: Start busybox udhcpd at boot time... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. [ OK ] Started Avahi mDNS/DNS-SD Stack. Starting Connection service... Starting LSB: Load kernel modules needed to enable cpufreq scaling... [ OK ] Started Deferred execution scheduler. Starting Login Service... Starting Generic Board Startup... [ OK ] Started System Logging Service. [ OK ] Started BB WL18xx wlan0 Service. [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ OK ] Started rc_battery_monitor. #### random: crng init done #### random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Found device /dev/ttyS0. [ OK ] Started LSB: Start daemon at boot time. [ OK ] Started LSB: Start busybox udhcpd at boot time. [ OK ] Started Connection service. [ OK ] Started Login Service. [ OK ] Reached target Network. [FAILED] Failed to start The Apache HTTP Server. See 'systemctl status apache2.service' for details. [ OK ] Reached target Network is Online. Starting LSB: Advanced IEEE 802.11 management daemon... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Stopped Network Time Synchronization. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Started Permit User Sessions. #### systemd-journald[865]: /dev/kmsg buffer overrun, some messages lost. [ OK ] Stopped Network Time Synchronization. #### systemd-journald[865]: /dev/kmsg buffer overrun, some messages lost. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Started Serial Getty on ttyS0. #### systemd-journald[865]: /dev/kmsg buffer overrun, some messages lost. [ OK ] Started Getty on tty1. Starting Light Display Manager... #### net eth0: initializing cpsw version 1.12 (0) [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling. #### SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) #### IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [FAILED] Failed to start Hostname Service. See 'systemctl status systemd-hostnamed.service' for details. [ OK ] Stopped Network Time Synchronization. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. Starting WPA supplicant... Starting LSB: set CPUFreq kernel parameters... [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started WPA supplicant. #### using random self ethernet address #### using random host ethernet address [ OK ] Stopped Network Time Synchronization. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. #### using random self ethernet address #### using random host ethernet address [ OK ] Started LSB: set CPUFreq kernel parameters. [ OK ] Started Light Display Manager. #### Mass Storage Function, version: 2009/09/11 #### LUN: removable file: (no medium) #### cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off #### IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready #### 8021q: 802.1Q VLAN Support v1.8 #### 8021q: adding VLAN 0 to HW filter on device eth0 Debian GNU/Linux 9 bbbw ttyS0 BeagleBoard.org Debian Image 2018-10-07 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] bbbw login: root Password: The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@bbbw:~# ifconfig eth0: flags=-28605 mtu 1500 inet6 fe80::6264:5ff:fe6f:e004 prefixlen 64 scopeid 0x20 ether 60:64:05:6f:e0:04 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 28 bytes 5875 (5.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 54 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 4 bytes 256 (256.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 4 bytes 256 (256.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@bbbw:~# ifconfig eth0: flags=-28605 mtu 1500 inet6 fe80::6264:5ff:fe6f:e004 prefixlen 64 scopeid 0x20 ether 60:64:05:6f:e0:04 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 30 bytes 7055 (6.8 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 54 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 4 bytes 256 (256.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 4 bytes 256 (256.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@bbbw:~# ifconfig eth0: flags=-28605 mtu 1500 inet 206.223.20.247 netmask 255.255.255.0 broadcast 206.223.20.255 inet6 fe80::6264:5ff:fe6f:e004 prefixlen 64 scopeid 0x20 ether 60:64:05:6f:e0:04 txqueuelen 1000 (Ethernet) RX packets 32 bytes 5700 (5.5 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 99 bytes 20059 (19.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 54 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 4 bytes 256 (256.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 4 bytes 256 (256.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@bbbw:~# helpalt Stopping User Manager for UID 0... Stopping Light Display Manager... Stopping Avahi mDNS/DNS-SD Stack... Stopping LSB: Start daemon at boot time... [ OK ] Stopped target Login Prompts. Stopping Serial Stopping Serial Getty on ttyS0... Stopping Regular background program processing daemon... Stopping LSB: Advanced IEEE 802.11 management daemon... Stopping OpenBSD Secure Shell server... Stopping LSB: Start busybox udhcpd at boot time... Stopping LSB: set CPUFreq kernel parameters... [ OK ] Stopped target Timers. [ OK ] Stopped Daily Cleanup of Temporary Directories. [ OK ] Stopped Daily apt upgrade and clean activities. [ OK ] Stopped Daily apt download activities. [ OK ] Stopped target System Time Synchronized. [ OK ] Stopped Session 1 of user root. Stopping Deferred execution scheduler... [ OK ] Stopped Avahi mDNS/DNS-SD Stack. [ OK ] Stopped Bonescript autorun. [ OK ] Stopped System Logging Service. [ OK ] Stopped Regular background program processing daemon. [ OK ] Stopped Deferred execution scheduler. [ OK ] Stopped Generic Board Startup. [ OK ] Stopped Serial Getty on ttyS0. [ OK ] Stopped Getty on tty1. [ OK ] Stopped OpenBSD Secure Shell server. [ OK ] Stopped User Manager for UID 0. [ OK ] Stopped Light Display Manager. [ OK ] Stopped Serial Getty on ttyGS0. [ OK ] Stopped LSB: Advanced IEEE 802.11 management daemon. [ OK ] Stopped LSB: Start daemon at boot time. [ OK ] Stopped LSB: Start busybox udhcpd at boot time. [ OK ] Stopped target Network is Online. [ OK ] Removed slice User Slice of root. Stopping Login Service... [ OK ] Removed slice system-getty.slice. [ OK ] Removed slice system-serial\x2dgetty.slice. Stopping Permit User Sessions... [ OK ] Stopped Login Service. [ OK ] Stopped LSB: set CPUFreq kernel parameters. [ OK ] Stopped Permit User Sessions. [ OK ] Stopped target Network. Stopping WPA supplicant... Stopping Raise network interfaces... Stopping Connection service... Stopping LSB: Load kernel modules needed to enable cpufreq scaling... [ OK ] Stopped WPA supplicant. [ OK ] Stopped Connection service. Stopping D-Bus System Message Bus... [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling. [ OK ] Stopped target Basic System. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Sockets. [ OK ] Closed Syslog Socket. [ OK ] Closed bonescript.socket. [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Closed node-red.socket. [ OK ] Closed cloud9.socket. [ OK ] Stopped target Paths. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target System Initialization. [ OK ] Stopped target Encrypted Volumes. [ OK ] Stopped Forward Password Requests to Wall Directory Watch. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped target Swap. Stopping Load/Save Random Seed... [ OK ] Stopped Raise network interfaces. [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped target Local File Systems. Unmounting /run/user/0... [ OK ] Stopped Load/Save Random Seed. [ OK ] Unmounted /run/user/0. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Reached target Shutdown. [ OK ] Reached target Final Step. Starting Halt... #### systemd-shutdow: 52 output lines suppressed due to ratelimiting #### systemd-shutdown[1]: Sending SIGTERM to remaining processes... #### systemd-journald[865]: Received SIGTERM from PID 1 (systemd-shutdow). #### systemd-shutdown[1]: Sending SIGKILL to remaining processes... #### systemd-shutdown[1]: Unmounting file systems. #### systemd-shutdown[1]: Remounting '/' read-only with options ''. #### EXT4-fs (mmcblk0p1): re-mounted. Opts: #### systemd-shutdown[1]: Remounting '/' read-only with options ''. #### EXT4-fs (mmcblk0p1): re-mounted. Opts: #### systemd-shutdown[1]: All filesystems unmounted. #### systemd-shutdown[1]: Deactivating swaps. #### systemd-shutdown[1]: All swaps deactivated. #### systemd-shutdown[1]: Detaching loop devices. #### systemd-shutdown[1]: All loop devices detached. #### reboot: System halted