U-Boot SPL 2022.04 (Oct 08 2023 - 14:39:49 +0530) Trying to boot from MMC1 U-Boot 2022.04 (Oct 08 2023 - 14:39:49 +0530) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Reset Source: Global external warm reset has occurred. Reset Source: Global warm SW reset has occurred. Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. Core: 152 devices, 16 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing (60s timeout) MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... ** Unable to use mmc 0:1 for loading the env ** Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone Cape EEPROM: no EEPROM at address: 0x54 BeagleBone Cape EEPROM: no EEPROM at address: 0x55 BeagleBone Cape EEPROM: no EEPROM at address: 0x56 BeagleBone Cape EEPROM: no EEPROM at address: 0x57 Net: eth2: ethernet@4a100000, eth3: usb_ether Press SPACE to abort autoboot in 5 seconds board_name=[A335BNLT] ... board_rev=[00C0] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 Couldn't find partition 0:2 0x82000000 Can't set block device Couldn't find partition 0:2 0x82000000 Can't set block device switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... libfdt fdt_check_header(): FDT_ERR_BADMAGIC Scanning disk mmc@48060000.blk... Scanning disk mmc@481d8000.blk... Found 4 disks No EFI system partition BootOrder not defined EFI boot manager: Cannot load any image gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 255 bytes read in 3 ms (83 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-5.10.179 ... 8516096 bytes read in 550 ms (14.8 MiB/s) debug: [enable_uboot_overlays=1] ... debug: [enable_uboot_cape_universal=] ... debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ... loading /boot/dtbs/5.10.179/am335x-boneblack-uboot-univ.dtb ... 199550 bytes read in 16 ms (11.9 MiB/s) Found 0 extension board(s). uboot_overlays: [fdt_buffer=0x60000] ... uboot_overlays: uboot loading of [BB-ADC-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_adc=1]... uboot_overlays: unable to find [mmc 0:2 /boot/overlays/BB-I2C1-TMP102-00A0.dtbo]... uboot_overlays: unable to find [mmc 0:2 BB-BONE-eMMC1-01-00A0.dtbo]... uboot_overlays: uboot loading of [BB-HDMI-TDA998x-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_video=1]... debug: [console=ttyS0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait] ... debug: [bootz 0x82000000 - 0x88000000] ... Kernel image @ 0x82000000 [ 0x000000 - 0x81f200 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffcc000, end 8ffffb7d ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.179 (n@n) (arm-linux-gnueabihf-gcc (GCC) 10.2.1 20210407 [releases/gcc-10 revision bab1d20e09d385f2b92d066cd11971e200b0a18a], GNU ld (Linaro_Binutils-2021.04) 2.35.2.20210110) #1 SMP PREEMPT Sun Oct 8 19:59:11 IST 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fefffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fefffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fefffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 21 pages/cpu s54220 r8192 d23604 u86016 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129666 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 451004K/523264K available (10240K kernel code, 1579K rwdata, 3432K rodata, 1024K init, 367K bss, 23108K reserved, 49152K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 43363 entries in 128 pages [ 0.000000] ftrace: allocated 128 pages with 1 groups [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts [ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 [ 0.000009] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000028] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000411] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 [ 0.002310] Console: colour dummy device 80x30 [ 0.002394] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) [ 0.020490] pid_max: default: 32768 minimum: 301 [ 0.021087] LSM: Security Framework initializing [ 0.021201] SELinux: Initializing. [ 0.021544] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.021564] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.023198] CPU: Testing write buffer coherency: ok [ 0.023277] CPU0: Spectre v2: using BPIALL workaround [ 0.025260] Setting up static identity map for 0x80100000 - 0x80100054 [ 0.025503] rcu: Hierarchical SRCU implementation. [ 0.026884] EFI services will not be available. [ 0.027217] smp: Bringing up secondary CPUs ... [ 0.027234] smp: Brought up 1 node, 1 CPU [ 0.027246] SMP: Total of 1 processors activated (995.32 BogoMIPS). [ 0.027258] CPU: All CPU(s) started in SVC mode. [ 0.027983] devtmpfs: initialized [ 0.067118] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.067607] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.067639] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.071326] pinctrl core: initialized pinctrl subsystem [ 0.073617] NET: Registered protocol family 16 [ 0.077144] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.077757] audit: initializing netlink subsys (disabled) [ 0.079047] thermal_sys: Registered thermal governor 'fair_share' [ 0.079059] thermal_sys: Registered thermal governor 'bang_bang' [ 0.079075] thermal_sys: Registered thermal governor 'step_wise' [ 0.080049] audit: type=2000 audit(0.076:1): state=initialized audit_enabled=0 res=1 [ 0.080097] cpuidle: using governor menu [ 0.158461] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.184037] raid6: skip pq benchmark and using algorithm neonx8 [ 0.184068] raid6: using neon recovery algorithm [ 0.186038] iommu: Default domain type: Translated [ 0.189271] SCSI subsystem initialized [ 0.189687] usbcore: registered new interface driver usbfs [ 0.189749] usbcore: registered new interface driver hub [ 0.189818] usbcore: registered new device driver usb [ 0.190307] pps_core: LinuxPPS API ver. 1 registered [ 0.190322] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.190351] PTP clock support registered [ 0.192130] NetLabel: Initializing [ 0.192151] NetLabel: domain hash size = 128 [ 0.192161] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.192243] NetLabel: unlabeled traffic allowed by default [ 0.193362] clocksource: Switched to clocksource dmtimer [ 1.255972] VFS: Disk quotas dquot_6.6.0 [ 1.256106] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.269207] NET: Registered protocol family 2 [ 1.269572] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.270957] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.271074] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 1.271123] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.271185] TCP: Hash tables configured (established 4096 bind 4096) [ 1.271325] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.271358] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.271627] NET: Registered protocol family 1 [ 1.272723] RPC: Registered named UNIX socket transport module. [ 1.272742] RPC: Registered udp transport module. [ 1.272752] RPC: Registered tcp transport module. [ 1.272762] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.272787] NET: Registered protocol family 44 [ 1.275502] Initialise system trusted keyrings [ 1.275952] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 1.284088] zbud: loaded [ 1.288043] NFS: Registering the id_resolver key type [ 1.288110] Key type id_resolver registered [ 1.288122] Key type id_legacy registered [ 1.288298] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.288315] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.288704] fuse: init (API version 7.32) [ 1.380543] xor: automatically using best checksumming function neon [ 1.380575] Key type asymmetric registered [ 1.380589] Asymmetric key parser 'x509' registered [ 1.380673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.380999] io scheduler mq-deadline registered [ 1.384853] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.390005] l3-aon-clkctrl:0000:0: failed to disable [ 1.393552] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 1.402449] CAN device driver interface [ 1.403077] usbcore: registered new interface driver smsc95xx [ 1.403676] usbcore: registered new interface driver uas [ 1.403751] usbcore: registered new interface driver usb-storage [ 1.403793] usbcore: registered new interface driver ums-alauda [ 1.403835] usbcore: registered new interface driver ums-cypress [ 1.403874] usbcore: registered new interface driver ums-datafab [ 1.403917] usbcore: registered new interface driver ums_eneub6250 [ 1.403959] usbcore: registered new interface driver ums-freecom [ 1.404000] usbcore: registered new interface driver ums-isd200 [ 1.404088] usbcore: registered new interface driver ums-jumpshot [ 1.404139] usbcore: registered new interface driver ums-karma [ 1.404181] usbcore: registered new interface driver ums-onetouch [ 1.404237] usbcore: registered new interface driver ums-realtek [ 1.404280] usbcore: registered new interface driver ums-sddr09 [ 1.404321] usbcore: registered new interface driver ums-sddr55 [ 1.404363] usbcore: registered new interface driver ums-usbat [ 1.405301] i2c /dev entries driver [ 1.405691] Driver for 1-wire Dallas network protocol. [ 1.406882] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 1.406900] softdog: soft_reboot_cmd= soft_active_on_boot=0 [ 1.408137] cpuidle: enable-method property 'ti,am3352' found operations [ 1.408868] sdhci: Secure Digital Host Controller Interface driver [ 1.408882] sdhci: Copyright(c) Pierre Ossman [ 1.409041] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.409485] ledtrig-cpu: registered to indicate activity on CPUs [ 1.410105] hid: raw HID events driver (C) Jiri Kosina [ 1.410474] usbcore: registered new interface driver usbhid [ 1.410486] usbhid: USB HID core driver [ 1.411135] drop_monitor: Initializing network drop monitor service [ 1.412307] NET: Registered protocol family 10 [ 1.417324] Segment Routing with IPv6 [ 1.417548] mip6: Mobile IPv6 [ 1.417570] NET: Registered protocol family 17 [ 1.417599] can: controller area network core [ 1.417739] NET: Registered protocol family 29 [ 1.418221] Key type dns_resolver registered [ 1.418241] mpls_gso: MPLS GSO support [ 1.418409] ThumbEE CPU extension supported. [ 1.418432] Registering SWP/SWPB emulation handler [ 1.418448] omap_voltage_late_init: Voltage driver support not added [ 1.419470] registered taskstats version 1 [ 1.419503] Loading compiled-in X.509 certificates [ 1.419638] zswap: loaded using pool lzo/zbud [ 1.420575] Key type .fscrypt registered [ 1.420595] Key type fscrypt-provisioning registered [ 1.425957] Btrfs loaded, crc32c=crc32c-generic [ 1.491722] wkup_m3_rproc 44d00000.cpu: Platform data missing! [ 1.553722] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 [ 1.704025] pinctrl-single 44e10800.pinmux: 142 pins, size 568 [ 1.799039] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 [ 1.842249] ti-sysc: probe of 44e31000.target-module failed with error -16 [ 1.883607] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.961895] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 25, base_baud = 3000000) is a 8250 [ 1.982762] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 26, base_baud = 3000000) is a 8250 [ 2.004048] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz [ 2.052580] ti-sysc: probe of 48040000.target-module failed with error -16 [ 2.169840] OMAP GPIO hardware version 0.1 [ 2.230139] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 2.259187] at24 2-0054: supply vcc not found, using dummy regulator [ 2.292926] at24 2-0055: supply vcc not found, using dummy regulator [ 2.327743] at24 2-0056: supply vcc not found, using dummy regulator [ 2.360722] at24 2-0057: supply vcc not found, using dummy regulator [ 2.387486] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.407742] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 39, base_baud = 3000000) is a 8250 [ 2.418944] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 40, base_baud = 3000000) is a 8250 [ 2.429965] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 41, base_baud = 3000000) is a 8250 [ 2.461762] c_can_platform 481cc000.can: c_can_platform device registered (regs=(ptrval), irq=44) [ 2.472103] c_can_platform 481d0000.can: c_can_platform device registered (regs=(ptrval), irq=45) [ 2.561009] omap_rng 48310000.rng: Random Number Generator ver. 20 [ 2.565706] random: crng init done [ 2.609456] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 2.611867] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.612510] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 [ 2.612530] cpsw 4a100000.ethernet: ALE Table size 1024 [ 2.612660] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies) [ 2.612736] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:63:b1:99 [ 2.633728] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! [ 2.633772] edma 49000000.dma: TI EDMA DMA engine driver [ 2.643390] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator [ 2.643735] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests [ 2.655114] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator [ 2.655434] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests [ 2.683431] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 2.683836] omap-sham 53100000.sham: will run requests pump with realtime priority [ 2.689873] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 2.690426] omap-aes 53500000.aes: will run requests pump with realtime priority [ 2.923198] gpio-of-helper ocp:cape-universal: Allocated GPIO id=0 name='P8_03' [ 2.923420] gpio-of-helper ocp:cape-universal: Allocated GPIO id=1 name='P8_04' [ 2.923602] gpio-of-helper ocp:cape-universal: Allocated GPIO id=2 name='P8_05' [ 2.923771] gpio-of-helper ocp:cape-universal: Allocated GPIO id=3 name='P8_06' [ 2.924191] gpio-of-helper ocp:cape-universal: Allocated GPIO id=4 name='P8_07' [ 2.924382] gpio-of-helper ocp:cape-universal: Allocated GPIO id=5 name='P8_08' [ 2.924566] gpio-of-helper ocp:cape-universal: Allocated GPIO id=6 name='P8_09' [ 2.924753] gpio-of-helper ocp:cape-universal: Allocated GPIO id=7 name='P8_10' [ 2.924927] gpio-of-helper ocp:cape-universal: Allocated GPIO id=8 name='P8_11' [ 2.925113] gpio-of-helper ocp:cape-universal: Allocated GPIO id=9 name='P8_12' [ 2.925169] gpio-of-helper ocp:cape-universal: Failed to get gpio property of 'P8_13' [ 2.925183] gpio-of-helper ocp:cape-universal: Failed to create gpio entry [ 2.933613] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 19, base_baud = 3000000) is a 8250 [ 4.268394] printk: console [ttyS0] enabled [ 4.302150] tps65217-pmic: Failed to locate of_node [id: -1] [ 4.319095] tps65217-bl: Failed to locate of_node [id: -1] [ 4.327316] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set [ 4.334603] input: tps65217_pwr_but as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 [ 4.353148] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 4.360136] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 4.367299] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 4.373861] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 4.386442] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) [ 4.403762] sdhci-omap 48060000.mmc: Got CD GPIO [ 4.413654] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator [ 4.421431] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 4.426829] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 [ 4.436866] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 4.445314] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.452759] usb usb1: Product: MUSB HDRC host driver [ 4.457870] usb usb1: Manufacturer: Linux 5.10.179 musb-hcd [ 4.463490] usb usb1: SerialNumber: musb-hdrc.1 [ 4.468956] hub 1-0:1.0: USB hub found [ 4.473181] hub 1-0:1.0: 1 port detected [ 4.477407] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA [ 4.487690] gpio-of-helper ocp:cape-universal: Allocated GPIO id=0 name='P8_03' [ 4.495851] gpio-of-helper ocp:cape-universal: Allocated GPIO id=1 name='P8_04' [ 4.503443] gpio-of-helper ocp:cape-universal: Allocated GPIO id=2 name='P8_05' [ 4.510995] gpio-of-helper ocp:cape-universal: Allocated GPIO id=3 name='P8_06' [ 4.519110] gpio-of-helper ocp:cape-universal: Allocated GPIO id=4 name='P8_07' [ 4.526794] gpio-of-helper ocp:cape-universal: Allocated GPIO id=5 name='P8_08' [ 4.534428] gpio-of-helper ocp:cape-universal: Allocated GPIO id=6 name='P8_09' [ 4.542083] gpio-of-helper ocp:cape-universal: Allocated GPIO id=7 name='P8_10' [ 4.549665] gpio-of-helper ocp:cape-universal: Allocated GPIO id=8 name='P8_11' [ 4.557230] gpio-of-helper ocp:cape-universal: Allocated GPIO id=9 name='P8_12' [ 4.564908] gpio-of-helper ocp:cape-universal: Allocated GPIO id=10 name='P8_13' [ 4.572582] gpio-of-helper ocp:cape-universal: Allocated GPIO id=11 name='P8_14' [ 4.580263] gpio-of-helper ocp:cape-universal: Allocated GPIO id=12 name='P8_15' [ 4.587950] gpio-of-helper ocp:cape-universal: Allocated GPIO id=13 name='P8_16' [ 4.595635] gpio-of-helper ocp:cape-universal: Allocated GPIO id=14 name='P8_17' [ 4.603321] gpio-of-helper ocp:cape-universal: Allocated GPIO id=15 name='P8_18' [ 4.610948] gpio-of-helper ocp:cape-universal: Allocated GPIO id=16 name='P8_19' [ 4.618651] gpio-of-helper ocp:cape-universal: Allocated GPIO id=17 name='P8_20' [ 4.626346] gpio-of-helper ocp:cape-universal: Allocated GPIO id=18 name='P8_21' [ 4.634027] gpio-of-helper ocp:cape-universal: Allocated GPIO id=19 name='P8_22' [ 4.641662] gpio-of-helper ocp:cape-universal: Allocated GPIO id=20 name='P8_23' [ 4.649332] gpio-of-helper ocp:cape-universal: Allocated GPIO id=21 name='P8_24' [ 4.657066] gpio-of-helper ocp:cape-universal: Allocated GPIO id=22 name='P8_25' [ 4.664752] gpio-of-helper ocp:cape-universal: Allocated GPIO id=23 name='P8_26' [ 4.672443] gpio-of-helper ocp:cape-universal: Allocated GPIO id=24 name='P8_27' [ 4.680133] gpio-of-helper ocp:cape-universal: Allocated GPIO id=25 name='P8_28' [ 4.687824] gpio-of-helper ocp:cape-universal: Allocated GPIO id=26 name='P8_29' [ 4.695506] gpio-of-helper ocp:cape-universal: Allocated GPIO id=27 name='P8_30' [ 4.703222] gpio-of-helper ocp:cape-universal: Allocated GPIO id=28 name='P8_31' [ 4.710990] gpio-of-helper ocp:cape-universal: Allocated GPIO id=29 name='P8_32' [ 4.718751] gpio-of-helper ocp:cape-universal: Allocated GPIO id=30 name='P8_33' [ 4.726539] gpio-of-helper ocp:cape-universal: Allocated GPIO id=31 name='P8_34' [ 4.734293] gpio-of-helper ocp:cape-universal: Allocated GPIO id=32 name='P8_35' [ 4.741940] mmc0: new high speed SDHC card at address aaaa [ 4.747680] gpio-of-helper ocp:cape-universal: Allocated GPIO id=33 name='P8_36' [ 4.756540] mmcblk0: mmc0:aaaa SS32G 29.7 GiB [ 4.761476] gpio-of-helper ocp:cape-universal: Allocated GPIO id=34 name='P8_37' [ 4.769203] gpio-of-helper ocp:cape-universal: Allocated GPIO id=35 name='P8_38' [ 4.776845] gpio-of-helper ocp:cape-universal: Allocated GPIO id=36 name='P8_39' [ 4.784486] gpio-of-helper ocp:cape-universal: Allocated GPIO id=37 name='P8_40' [ 4.792118] gpio-of-helper ocp:cape-universal: Allocated GPIO id=38 name='P8_41' [ 4.799747] gpio-of-helper ocp:cape-universal: Allocated GPIO id=39 name='P8_42' [ 4.807454] gpio-of-helper ocp:cape-universal: Allocated GPIO id=40 name='P8_43' [ 4.815094] gpio-of-helper ocp:cape-universal: Allocated GPIO id=41 name='P8_44' [ 4.822722] gpio-of-helper ocp:cape-universal: Allocated GPIO id=42 name='P8_45' [ 4.830348] gpio-of-helper ocp:cape-universal: Allocated GPIO id=43 name='P8_46' [ 4.838002] gpio-of-helper ocp:cape-universal: Allocated GPIO id=44 name='P9_11' [ 4.845644] gpio-of-helper ocp:cape-universal: Allocated GPIO id=45 name='P9_12' [ 4.853277] gpio-of-helper ocp:cape-universal: Allocated GPIO id=46 name='P9_13' [ 4.860904] gpio-of-helper ocp:cape-universal: Allocated GPIO id=47 name='P9_14' [ 4.868526] gpio-of-helper ocp:cape-universal: Allocated GPIO id=48 name='P9_15' [ 4.876157] gpio-of-helper ocp:cape-universal: Allocated GPIO id=49 name='P9_16' [ 4.883815] gpio-of-helper ocp:cape-universal: Allocated GPIO id=50 name='P9_17' [ 4.891443] gpio-of-helper ocp:cape-universal: Allocated GPIO id=51 name='P9_18' [ 4.899080] gpio-of-helper ocp:cape-universal: Allocated GPIO id=52 name='P9_19' [ 4.906705] gpio-of-helper ocp:cape-universal: Allocated GPIO id=53 name='P9_20' [ 4.914325] gpio-of-helper ocp:cape-universal: Allocated GPIO id=54 name='P9_21' [ 4.921949] gpio-of-helper ocp:cape-universal: Allocated GPIO id=55 name='P9_22' [ 4.929568] gpio-of-helper ocp:cape-universal: Allocated GPIO id=56 name='P9_23' [ 4.937218] gpio-of-helper ocp:cape-universal: Allocated GPIO id=57 name='P9_24' [ 4.945248] gpio-of-helper ocp:cape-universal: Allocated GPIO id=58 name='P9_25' [ 4.952946] gpio-of-helper ocp:cape-universal: Allocated GPIO id=59 name='P9_26' [ 4.960596] gpio-of-helper ocp:cape-universal: Allocated GPIO id=60 name='P9_27' [ 4.968217] gpio-of-helper ocp:cape-universal: Allocated GPIO id=61 name='P9_28' [ 4.975853] gpio-of-helper ocp:cape-universal: Allocated GPIO id=62 name='P9_29' [ 4.983487] gpio-of-helper ocp:cape-universal: Allocated GPIO id=63 name='P9_30' [ 4.991111] gpio-of-helper ocp:cape-universal: Allocated GPIO id=64 name='P9_31' [ 4.998738] gpio-of-helper ocp:cape-universal: Allocated GPIO id=65 name='P9_41' [ 5.006368] gpio-of-helper ocp:cape-universal: Allocated GPIO id=66 name='P9_91' [ 5.014001] gpio-of-helper ocp:cape-universal: Allocated GPIO id=67 name='P9_42' [ 5.021631] gpio-of-helper ocp:cape-universal: Allocated GPIO id=68 name='P9_92' [ 5.029098] gpio-of-helper ocp:cape-universal: ready [ 5.039599] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 5.046722] mmcblk0: p1 p2 [ 5.052204] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 5.066408] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 5.083058] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.091470] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 5.101287] devtmpfs: mounted [ 5.112306] Freeing unused kernel memory: 1024K [ 5.117534] Run /sbin/init as init process SELinux: Could not open policy file <= /etc/selinux/targeted/policy/policy.33: No such file or directory [ 5.556857] systemd[1]: System time before build time, advancing clock. [ 5.631131] systemd[1]: systemd 252 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR -IMA -SMACK -SECCOMP -GCRYPT -GNUTLS +OPENSSL -ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ +ZLIB -ZSTD -BPF_FRAMEWORK -XKBCOMMON -UTMP -SYSVINIT default-hierarchy=unified) [ 5.663160] systemd[1]: Detected architecture arm. Welcome to Buildroot 2023.08-git! [ 5.689735] systemd[1]: Hostname set to . [ 5.703748] systemd[1]: Initializing machine ID from random generator. [ 5.710867] systemd[1]: Installed transient /etc/machine-id file. [ 6.784429] systemd[1]: Queued start job for default target Multi-User System. [ 6.803243] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 6.829694] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 6.857838] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 6.884510] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 6.906497] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password 
ts to Console Directory Watch. [ 6.930339] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R
uests to Wall Directory Watch. [ 6.954157] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 6.977874] systemd[1]: Reached target Local Integrity Protected Volumes. [ OK ] Reached target Local Integrity Protected Volumes. [ 7.002061] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 7.021897] systemd[1]: Reached target Remote Encrypted Volumes. [ OK ] Reached target Remote Encrypted Volumes. [ 7.045757] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 7.069745] systemd[1]: Reached target Remote Verity Protected Volumes. [ OK ] Reached target Remote Verity Protected Volumes. [ 7.093727] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 7.113883] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 7.133997] systemd[1]: Reached target Local Verity Protected Volumes. [ OK ] Reached target Local Verity Protected Volumes. [ 7.158715] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ OK ] Listening on Device-mapper event daemon FIFOs. [ 7.183588] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 7.207161] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 7.231215] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 7.255513] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 7.279618] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 7.303000] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 7.327157] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 7.351163] systemd[1]: Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 7.372513] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 7.410969] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 7.450094] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 7.489561] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 7.526815] systemd[1]: Starting Availability of block devices... Starting Availability of block devices... [ 7.558869] systemd[1]: Create List of Static Device Nodes was skipped because of an unmet condition check (ConditionFileNotEmpty=/lib/modules/5.10.179/modules.devname). [ 7.590280] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... Starting Monitoring of LVM
meventd or progress polling... [ 7.643535] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 7.700350] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 7.747479] systemd[1]: Starting Load Kernel Module efi_pstore... Starting Load Kernel Module efi_pstore... [ 7.791311] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 7.830807] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 7.891161] systemd[1]: Starting Journal Service... Starting Journal Service... [ 7.924989] systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met. [ 7.975808] systemd[1]: Starting Generate network units from Kernel command line... Starting Generate network 
ts from Kernel command line... [ 8.050873] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 8.126733] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 8.256858] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 8.312259] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 8.351258] systemd[1]: Mounted Kernel Trace File System. [ OK ] Mounted Kernel Trace File System. [ 8.387325] systemd[1]: Mounted Temporary Directory /tmp. [ OK ] Mounted Temporary Directory /tmp. [ 8.425001] systemd[1]: Finished Availability of block devices. [ OK ] Finished Availability of block devices. [ 8.468911] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ OK ] Finished Monitoring of LVM
 dmeventd or progress polling. [ 8.525039] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 8.557914] systemd[1]: Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module configfs. [ 8.600970] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 8.634120] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 8.668995] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 8.702359] systemd[1]: Finished Load Kernel Module efi_pstore. [ OK ] Finished Load Kernel Module efi_pstore. [ 8.740899] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 8.774310] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 8.813802] systemd[1]: Finished File System Check on Root Device. [ OK ] Finished File System Check on Root Device. [ 8.852993] systemd[1]: Finished Generate network units from Kernel command line. [ OK ] Finished Generate network units from Kernel command line. [ 8.897050] systemd[1]: Finished Apply Kernel Variables. [ OK ] Finished Apply Kernel Variables. [ 8.937257] systemd[1]: Reached target Preparation for Network. [ OK ] Reached target Preparation for Network. [ 9.002309] systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System... [ 9.078160] systemd[1]: Mounting Kernel Configuration File System... Mounting Kernel Configuration File System... [ 9.157578] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 9.207779] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File S[ 9.297768] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) ystem. [ OK ] Finished Remount Root and Kernel File Systems. Starting Flush Journal to Persistent Storage... Starting Create System Users... [ 9.512682] systemd-journald[223]: Received client request to flush runtime journal. [ 9.677628] audit: type=1334 audit(1671560148.108:2): prog-id=6 op=LOAD [ 9.697685] audit: type=1334 audit(1671560148.128:3): prog-id=7 op=LOAD Starting User Database Manager... [ 9.723764] audit: type=1334 audit(1671560148.128:4): prog-id=8 op=LOAD [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Started User Database Manager. [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. [ OK ] Reached target Local File Systems. Starting Commit a transient machine-id on disk... Starting Create Volatile Files and Directories... [ 11.222720] audit: type=1334 audit(1671560149.664:5): prog-id=9 op=LOAD [ 11.250479] audit: type=1334 audit(1671560149.676:6): prog-id=10 op=LOAD Starting Rule-based Manage
for Device Events and Files... Starting Update is Completed... [ OK ] Finished Commit a transient machine-id on disk. [ OK ] Finished Update is Completed. [ OK ] Finished Create Volatile Files and Directories. [ 12.106012] audit: type=1334 audit(1671560150.548:7): prog-id=11 op=LOAD Starting Network Name Resolution... [ 12.167035] audit: type=1334 audit(1671560150.608:8): prog-id=12 op=LOAD Starting Network Time Synchronization... [ OK ] Started Rule-based Manager for Device Events and Files. [ 12.619541] audit: type=1334 audit(1671560151.060:9): prog-id=13 op=LOAD Starting Network Configuration... [ OK ] Finished Coldplug All udev Devices. [ OK ] Started Network Configuration. [ OK ] Started Network Name Resolution. [ OK ] Started Network Time Synchronization. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Started Discard unused blocks once a week. [ OK ] Reached target Timer Units. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on UUID daemon activation socket. [ OK ] Reached target Socket Units. [ OK ] Reached target Basic System. [ OK ] Started D-Bus System Message Bus. Starting Connection service... [ OK ] Started Input Event Daemon. [ 15.572323] audit: type=1334 audit(1671560154.012:10): prog-id=14 op=LOAD Starting Home Area Manager... [ 15.708865] audit: type=1334 audit(1671560154.148:11): prog-id=15 op=LOAD [ 15.743321] audit: type=1334 audit(1671560154.168:12): prog-id=16 op=LOAD [ 15.793569] audit: type=1334 audit(1671560154.176:13): prog-id=17 op=LOAD Starting User Login Management... [ OK ] Found device /dev/ttyS0. [ OK ] Started Home Area Manager. [ 16.577006] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) [ 16.675371] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) [ OK ] Started Connection service. [ OK ] Reached target Network. Starting DHCP client... Starting DHCP server... Starting Dropbear SSH daemon... [ OK ] Stopped Input Event Daemon. [ OK ] Started Input Event Daemon. Starting OpenSSH server daemon... [ OK ] Finished Home Area Activation. [ 17.709543] audit: type=1334 audit(1671560156.148:14): prog-id=18 op=LOAD [ 17.757552] audit: type=1334 audit(1671560156.192:15): prog-id=19 op=LOAD [ 17.801165] audit: type=1334 audit(1671560156.192:16): prog-id=20 op=LOAD Starting Hostname Service... Starting Permit User Sessions... [FAILED] Failed to start DHCP server. See 'systemctl status dhcpd.service' for details. [ OK ] Started Dropbear SSH daemon. [ OK ] Finished Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Stopped Input Event Daemon. [ OK ] Started Input Event Daemon. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Started User Login Management. [ 18.786356] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 18.823516] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Stopped Input Event Daemon. [ OK ] Started Input Event Daemon. [ 19.482440] systemd-journald[223]: Oldest entry in /var/log/journal/2a3ca58361a14a6db704d15651c9ff5f/system.journal is older than the configured file retention duration (1month), suggesting rotation. [ OK ] Stopped Input Event Daemon. [ 19.602633] systemd-journald[223]: /var/log/journal/2a3ca58361a14a6db704d15651c9ff5f/system.journal: Journal header limits reached or header out-of-date, rotating. [ OK ] Started Input Event Daemon. [ OK ] Stopped Input Event Daemon. [FAILED] Failed to start Input Event Daemon. See 'systemctl status input-event-daemon.service' for details. [ OK ] Started DHCP client.[ 20.874350] c_can_platform 481cc000.can can0: bit-timing not yet defined [ 20.937504] c_can_platform 481cc000.can can0: failed to open can device [ 20.967494] c_can_platform 481d0000.can can1: bit-timing not yet defined [ 20.997552] c_can_platform 481d0000.can can1: failed to open can device [ OK ] Started Hostname Service. [ OK ] Reached target Hardware activated USB gadget. Welcome to Beaglebone Beaglebone login: Beaglebone login: [ 25.207977] audit: type=1334 audit(1696776452.301:17): prog-id=12 op=UNLOAD [ 25.242865] audit: type=1334 audit(1696776452.333:18): prog-id=21 op=LOAD root Password: Last login: Sun Oct 8 14:47:34 on ttyS0 # # # # # cd /lib/modules/5.10.179/extra/ # ls dma1-module.ko.xz dma_module.ko.xz # insmod dma1-module.ko [ 48.556398] dma1_module: loading out-of-tree module taints kernel. [ 48.564860] my_dma_memcpy - Init [ 48.568653] my_dma_memcpy - Before DMA Transfer: src_buf[0] = 12 [ 48.576071] my_dma_memcpy - Before DMA Transfer: dst_buf[0] = 0 [ 48.582763] my_dma_memcpy - Error requesting dma channel # # # insmod dma_module.ko [ 74.453811] dma_test 480602fc.target-module:dmatest@0: Start probe [ 74.460323] dma_test 480602fc.target-module:dmatest@0: Configure dma xfer [ 74.472296] edma 49000000.dma: Exceeded max max_burst [ 74.479823] edma 49000000.dma: cfg->src_maxburst 1, chan->device->max_burst: 0 [ 74.489582] edma 49000000.dma: cfg->dst_maxburst 1, chan->device->max_burst: 0 [ 74.499283] dma_test 480602fc.target-module:dmatest@0: Dmaengine slave config failed [ 74.509742] dma_test: probe of 480602fc.target-module:dmatest@0 failed with error -22 # #