U-Boot SPL 2014.10-00019-gbfd789c (Oct 15 2014 - 11:56:05) U-Boot 2014.10-00019-gbfd789c (Oct 15 2014 - 11:56:05), Build: jenkins-github_Bootloader-Builder-43 Watchdog enabled I2C: ready DRAM: 512 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment Net: not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... reading uEnv.txt 760 bytes read in 6 ms (123 KiB/s) gpio: pin 55 (gpio 55) value is 1 Loaded environment from uEnv.txt Importing environment from mmc ... Checking if uenvcmd is set ... gpio: pin 56 (gpio 56) value is 1 Running uenvcmd ... 696 bytes read in 73 ms (8.8 KiB/s) 6923136 bytes read in 451 ms (14.6 MiB/s) 2355598 bytes read in 189 ms (11.9 MiB/s) 84819 bytes read in 200 ms (414.1 KiB/s) Kernel image @ 0x82000000 [ 0x000000 - 0x69a380 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fdc0000, end 8ffff18e ... OK Loading Device Tree to 8fda8000, end 8fdbfb52 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.19-ti-r30 (root@a6-imx6q-wandboard-2gb) (gcc version 4.9.1 (Debian 4.9.1-16) ) #1 SMP PREEMPT Mon Oct 13 17:36:06 UTC 2014 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone Black [ 0.000000] cma: CMA: reserved 24 MiB at 9e000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.0 (sgx neon ) [ 0.000000] PERCPU: Embedded 10 pages/cpu @df9b1000 s16768 r8192 d16000 u40960 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536 [ 0.000000] Kernel command line: console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait fixrtc init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 471772K/522240K available (8374K kernel code, 751K rwdata, 3260K rodata, 468K init, 5820K bss, 50468K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0b64a3c (11635 kB) [ 0.000000] .init : 0xc0b65000 - 0xc0bda180 ( 469 kB) [ 0.000000] .data : 0xc0bdc000 - 0xc0c97f04 ( 752 kB) [ 0.000000] .bss : 0xc0c97f04 - 0xc1247110 (5821 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns [ 0.000077] OMAP clocksource: timer1 at 24000000 Hz [ 0.000879] Console: colour dummy device 80x30 [ 0.002864] console [tty0] enabled [ 0.002892] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002921] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002939] ... MAX_LOCK_DEPTH: 48 [ 0.002958] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002977] ... CLASSHASH_SIZE: 4096 [ 0.002996] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.003015] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.003034] ... CHAINHASH_SIZE: 16384 [ 0.003053] memory used by lock dependency info: 3695 kB [ 0.003074] per task-struct memory footprint: 1152 bytes [ 0.003131] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) [ 0.078702] pid_max: default: 32768 minimum: 301 [ 0.079080] Security Framework initialized [ 0.079251] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.079286] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.145292] Initializing cgroup subsys net_cls [ 0.145528] CPU: Testing write buffer coherency: ok [ 0.146830] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.146922] Setting up static identity map for 0x807fa1f0 - 0x807fa248 [ 0.182419] Brought up 1 CPUs [ 0.182477] SMP: Total of 1 processors activated. [ 0.182503] CPU: All CPU(s) started in SVC mode. [ 0.185557] devtmpfs: initialized [ 0.194476] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.237289] omap_hwmod: tptc0 using broken dt data from edma [ 0.237731] omap_hwmod: tptc1 using broken dt data from edma [ 0.238119] omap_hwmod: tptc2 using broken dt data from edma [ 0.246069] omap_hwmod: debugss: _wait_target_disable failed [ 0.305547] xor: measuring software checksum speed [ 0.398640] arm4regs : 1245.600 MB/sec [ 0.498638] 8regs : 1113.600 MB/sec [ 0.598635] 32regs : 1152.800 MB/sec [ 0.698636] neon : 1752.000 MB/sec [ 0.698659] xor: using function: neon (1752.000 MB/sec) [ 0.698695] pinctrl core: initialized pinctrl subsystem [ 0.701372] regulator-dummy: no parameters [ 0.704278] NET: Registered protocol family 16 [ 0.709575] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.711238] cpuidle: using governor ladder [ 0.711281] cpuidle: using governor menu [ 0.719052] syscon 44e10000.syscon: regmap [mem 0x44e10000-0x44e107ff] registered [ 0.720194] platform 49000000.edma: alias fck already exists [ 0.720252] platform 49000000.edma: alias fck already exists [ 0.720288] platform 49000000.edma: alias fck already exists [ 0.723207] OMAP GPIO hardware version 0.1 [ 0.737306] platform 481d0000.d_can: alias fck already exists [ 0.764917] No ATAGs? [ 0.764964] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.786268] bio: create slab at 0 [ 0.948870] raid6: int32x1 230 MB/s [ 1.118817] raid6: int32x2 294 MB/s [ 1.288838] raid6: int32x4 294 MB/s [ 1.458645] raid6: int32x8 292 MB/s [ 1.628672] raid6: neonx1 1453 MB/s [ 1.798651] raid6: neonx2 1886 MB/s [ 1.968636] raid6: neonx4 1923 MB/s [ 2.138642] raid6: neonx8 1192 MB/s [ 2.138665] raid6: using algorithm neonx4 (1923 MB/s) [ 2.138687] raid6: using intx1 recovery algorithm [ 2.157120] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 2.158972] vbat: 5000 mV [ 2.159747] vmmcsd_fixed: 3300 mV [ 2.163948] i2c-core: driver [palmas] using legacy suspend method [ 2.163991] i2c-core: driver [palmas] using legacy resume method [ 2.164607] SCSI subsystem initialized [ 2.165942] usbcore: registered new interface driver usbfs [ 2.166113] usbcore: registered new interface driver hub [ 2.166450] usbcore: registered new device driver usb [ 2.167561] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe [ 2.167641] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral [ 2.167723] omap_i2c 4819c000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c2_pins, deferring probe [ 2.167775] platform 4819c000.i2c: Driver omap_i2c requests probe deferral [ 2.168269] pps_core: LinuxPPS API ver. 1 registered [ 2.168297] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.168365] PTP clock support registered [ 2.170613] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 2.176873] Switched to clocksource timer1 [ 2.382259] NET: Registered protocol family 2 [ 2.384585] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 2.384789] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) [ 2.386003] TCP: Hash tables configured (established 4096 bind 4096) [ 2.386193] TCP: reno registered [ 2.386235] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 2.386423] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 2.387605] NET: Registered protocol family 1 [ 2.388998] RPC: Registered named UNIX socket transport module. [ 2.389048] RPC: Registered udp transport module. [ 2.389071] RPC: Registered tcp transport module. [ 2.389094] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.390667] Trying to unpack rootfs image as initramfs... [ 2.554004] Freeing initrd memory: 2300K (cfdc0000 - cffff000) [ 2.554454] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 2.559907] futex hash table entries: 256 (order: 2, 16384 bytes) [ 2.719148] VFS: Disk quotas dquot_6.5.2 [ 2.719378] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.721415] NFS: Registering the id_resolver key type [ 2.721831] Key type id_resolver registered [ 2.721866] Key type id_legacy registered [ 2.721990] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 2.722942] fuse init (API version 7.22) [ 2.723387] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 2.724979] msgmni has been set to 973 [ 2.730672] NET: Registered protocol family 38 [ 2.731076] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.731181] io scheduler noop registered [ 2.731207] io scheduler deadline registered [ 2.731269] io scheduler cfq registered (default) [ 2.734486] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 2.740976] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.746716] omap_uart 44e09000.serial: no wakeirq for uart0 [ 2.747830] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 3.621629] console [ttyO0] enabled [ 3.626767] omap_uart 48022000.serial: no wakeirq for uart0 [ 3.633089] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 3.643976] omap_uart 48024000.serial: no wakeirq for uart0 [ 3.650205] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 3.661107] omap_uart 481a8000.serial: no wakeirq for uart0 [ 3.667322] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61, base_baud = 3000000) is a OMAP UART4 [ 3.678140] omap_uart 481aa000.serial: no wakeirq for uart0 [ 3.684303] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62, base_baud = 3000000) is a OMAP UART5 [ 3.697066] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 3.704830] [drm] Initialized drm 1.1.0 20060810 [ 3.727109] brd: module loaded [ 3.741062] loop: module loaded [ 3.745080] (hci_tty): inside hci_tty_init [ 3.750154] (hci_tty): allocated 248, 0 [ 3.761114] bone-pinmux-helper P8_27_pinmux.18: Set initial pinmux mode to hdmi [ 3.769594] bone-pinmux-helper P8_28_pinmux.19: Set initial pinmux mode to hdmi [ 3.778015] bone-pinmux-helper P8_29_pinmux.20: Set initial pinmux mode to hdmi [ 3.786364] bone-pinmux-helper P8_30_pinmux.21: Set initial pinmux mode to hdmi [ 3.794727] bone-pinmux-helper P8_31_pinmux.22: Set initial pinmux mode to hdmi [ 3.803020] bone-pinmux-helper P8_32_pinmux.23: Set initial pinmux mode to hdmi [ 3.811315] bone-pinmux-helper P8_33_pinmux.24: Set initial pinmux mode to hdmi [ 3.819700] bone-pinmux-helper P8_34_pinmux.25: Set initial pinmux mode to hdmi [ 3.828018] bone-pinmux-helper P8_35_pinmux.26: Set initial pinmux mode to hdmi [ 3.836365] bone-pinmux-helper P8_36_pinmux.27: Set initial pinmux mode to hdmi [ 3.844881] bone-pinmux-helper P8_37_pinmux.28: Set initial pinmux mode to hdmi [ 3.853411] bone-pinmux-helper P8_38_pinmux.29: Set initial pinmux mode to hdmi [ 3.861971] bone-pinmux-helper P8_39_pinmux.30: Set initial pinmux mode to hdmi [ 3.870545] bone-pinmux-helper P8_40_pinmux.31: Set initial pinmux mode to hdmi [ 3.879161] bone-pinmux-helper P8_41_pinmux.32: Set initial pinmux mode to hdmi [ 3.887793] bone-pinmux-helper P8_42_pinmux.33: Set initial pinmux mode to hdmi [ 3.896484] bone-pinmux-helper P8_43_pinmux.34: Set initial pinmux mode to hdmi [ 3.905294] bone-pinmux-helper P8_44_pinmux.35: Set initial pinmux mode to hdmi [ 3.914101] bone-pinmux-helper P8_45_pinmux.36: Set initial pinmux mode to hdmi [ 3.922938] bone-pinmux-helper P8_46_pinmux.37: Set initial pinmux mode to hdmi [ 3.942978] bone-pinmux-helper P9_25_pinmux.50: Set initial pinmux mode to audio [ 3.955300] bone-pinmux-helper P9_28_pinmux.53: Set initial pinmux mode to audio [ 3.964902] bone-pinmux-helper P9_29_pinmux.54: Set initial pinmux mode to audio [ 3.976003] bone-pinmux-helper P9_31_pinmux.56: Set initial pinmux mode to audio [ 3.991086] mtdoops: mtd device (mtddev=name/number) must be supplied [ 4.002867] usbcore: registered new interface driver asix [ 4.008778] usbcore: registered new interface driver ax88179_178a [ 4.015280] usbcore: registered new interface driver cdc_ether [ 4.021609] usbcore: registered new interface driver smsc95xx [ 4.027787] usbcore: registered new interface driver net1080 [ 4.033825] usbcore: registered new interface driver cdc_subset [ 4.040171] usbcore: registered new interface driver zaurus [ 4.046203] usbcore: registered new interface driver cdc_ncm [ 4.053781] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.060809] ehci-omap: OMAP-EHCI Host Controller driver [ 4.067486] usbcore: registered new interface driver cdc_wdm [ 4.073591] usbcore: registered new interface driver usb-storage [ 4.082092] mousedev: PS/2 mouse device common for all mice [ 4.091260] i2c-core: driver [rtc-ds1307] using legacy suspend method [ 4.098275] i2c-core: driver [rtc-ds1307] using legacy resume method [ 4.107348] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 4.116304] i2c /dev entries driver [ 4.120162] Driver for 1-wire Dallas network protocol. [ 4.129462] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 4.214855] mmc0: host does not support reading read-only switch. assuming write-enable. [ 4.228535] ledtrig-cpu: registered to indicate activity on CPUs [ 4.235257] mmc0: new high speed SDHC card at address 1234 [ 4.241962] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 4.250385] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 4.262723] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 4.269239] mmcblk0: p1 p2 [ 4.282714] hidraw: raw HID events driver (C) Jiri Kosina [ 4.290958] usbcore: registered new interface driver usbhid [ 4.300586] usbhid: USB HID core driver [ 4.306032] ashmem: initialized [ 4.311955] remoteproc0: wkup_m3 is available [ 4.316668] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 4.326391] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 4.340181] pruss-rproc 4a300000.pruss: creating platform devices for PRU cores [ 4.348233] remoteproc0: powering up wkup_m3 [ 4.352855] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 154768 [ 4.364873] remoteproc1: 4a334000.pru0 is available [ 4.371318] remoteproc0: remote processor wkup_m3 is now up [ 4.377485] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 4.387203] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 4.398981] remoteproc1: failed to load rproc-pru0-fw [ 4.404558] pru-rproc 4a334000.pru0: booting the PRU core manually [ 4.411330] remoteproc1: powering up 4a334000.pru0 [ 4.417047] remoteproc1: request_firmware failed: -2 [ 4.422373] pru-rproc 4a334000.pru0: rproc_boot failed [ 4.428538] pru-rproc: probe of 4a334000.pru0 failed with error -2 [ 4.435938] remoteproc2: 4a338000.pru1 is available [ 4.441380] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 4.450941] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 4.462420] remoteproc2: failed to load rproc-pru1-fw [ 4.468194] pru-rproc 4a338000.pru1: booting the PRU core manually [ 4.474706] remoteproc2: powering up 4a338000.pru1 [ 4.480265] remoteproc2: request_firmware failed: -2 [ 4.485655] pru-rproc 4a338000.pru1: rproc_boot failed [ 4.491279] pru-rproc: probe of 4a338000.pru1 failed with error -2 [ 4.500582] oprofile: using arm/armv7 [ 4.504718] nf_conntrack version 0.5.0 (7791 buckets, 31164 max) [ 4.512710] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.518901] TCP: cubic registered [ 4.522677] NET: Registered protocol family 10 [ 4.530516] mip6: Mobile IPv6 [ 4.533776] NET: Registered protocol family 17 [ 4.539190] Key type dns_resolver registered [ 4.543706] mpls_gso: MPLS GSO support [ 4.547722] NET: Registered protocol family 41 [ 4.554157] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 4.563578] cpu cpu0: cpu0 clock notifier not ready, retry [ 4.569507] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 4.578632] PM: CM3 Firmware Version = 0x189 [ 4.584119] PM: bootloader does not support rtc-only! [ 4.589668] ThumbEE CPU extension supported. [ 4.594282] Registering SWP/SWPB emulation handler [ 4.599378] SmartReflex Class3 initialized [ 4.606150] bio: create slab at 1 [ 4.611732] Btrfs loaded [ 4.615334] vbat: disabling [ 4.618507] regulator-dummy: disabling [ 4.643318] vdd_ddr3: 1350 mV [ 4.649419] vdd_mpu: 925 <--> 1375 mV at 1325 mV [ 4.656295] vdd_core: 925 <--> 1150 mV at 1125 mV [ 4.661695] mmc1: BKOPS_EN bit is not set [ 4.668051] LDO1: at 1800 mV [ 4.672113] mmc1: new high speed MMC card at address 0001 [ 4.679274] LDO2: at 3300 mV [ 4.684383] mmcblk1: mmc1:0001 MMC02G 1.78 GiB [ 4.690675] LDO3: 1800 mV [ 4.694072] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 4.702059] LDO4: at 3300 mV [ 4.705655] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 4.713842] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 4.722869] mmcblk1: p1 p2 [ 4.733576] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 4.744466] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 4.750740] mmcblk1boot1: unknown partition table [ 4.759332] mmcblk1boot0: unknown partition table [ 4.776169] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 4.792226] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 4.808325] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 4.824135] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 4.831744] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 4.839442] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[950000<->1325000]:-22 [ 4.916909] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 4.923362] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 4.940805] libphy: 4a101000.mdio: probed [ 4.945083] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 4.956995] cpsw 4a100000.ethernet: Detected MACID = c8:a0:30:ac:da:05 [ 4.968517] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 4.977790] sr_init: No PMIC hook to init smartreflex [ 4.983434] sr_init: platform driver register failed for SR [ 5.009752] Freeing unused kernel memory: 468K (c0b65000 - c0bda000) Loading, please wait... [ 5.119959] systemd-udevd[102]: starting version 215 [ 5.140539] random: systemd-udevd urandom read with 38 bits of entropy available Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 6.802427] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. [ 7.792366] random: nonblocking pool is initialized Valid EEPROM header found ----------------------------- debug copying: [/dev/mmcblk0] -> [/dev/mmcblk1] NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk1boot0 179:16 0 1M 1 disk mmcblk1boot1 179:24 0 1M 1 disk mmcblk0 179:0 0 3.7G 0 disk |-mmcblk0p1 179:1 0 96M 0 part /boot/uboot `-mmcblk0p2 179:2 0 1.6G 0 part / mmcblk1 179:8 0 1.8G 0 disk |-mmcblk1p1 179:9 0 96M 0 part `-mmcblk1p2 179:10 0 1.7G 0 part ----------------------------- Erasing: /dev/mmcblk1 108+0 records in 108+0 records out 113246208 bytes (113 MB) copied, 19.8662 s, 5.7 MB/s 108+0 records in 108+0 records out 113246208 bytes (113 MB) copied, 4.7907 s, 23.6 MB/s Using dd to place bootloader on [/dev/mmcblk1] ----------------------------- dd if=/opt/backup/uboot/MLO of=/dev/mmcblk1 count=1 seek=1 conv=notrunc bs=128k ----------------------------- 0+1 records in 0+1 records out 70732 bytes (71 kB) copied, 0.0222928 s, 3.2 MB/s ----------------------------- dd if=/opt/backup/uboot/u-boot.img of=/dev/mmcblk1 count=2 seek=1 conv=notrunc bs=384k ----------------------------- 0+1 records in 0+1 records out 375372 bytes (375 kB) copied, 0.127081 s, 3.0 MB/s Formatting: /dev/mmcblk1 sfdisk: Checking that no-one is using this disk right now ... [ 33.249191] mmcblk1: unknown partition table sfdisk: OK Disk /dev/mmcblk1: 58624 cylinders, 4 heads, 16 sectors/track sfdisk: /dev/mmcblk1: unrecognized partition table type Old situation: sfdisk: No partitions found New situation: Units: 1MiB = 1024*1024 bytes, blocks of 1024 bytes, counting from 0 Device Boot Sta[ 33.276037] mmcblk1: p1 p2 rt End MiB #blocks Id System /dev/mmcblk1p1 * 1 96 96 98304 e W95 FAT16 (LBA) /dev/mmcblk1p2 97 1831 1735 1776640 83 Linux /dev/mmcblk1p3 0 - 0 0 0 Empty /dev/mmcblk1p4 0 - 0 0 0 Empty Successfully wrote the new partition table Re-reading the partition table ... sfdisk: If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (See fdisk(8).) mkfs.vfat -F 16 /dev/mmcblk1p1 -n BEAGLEBONE ----------------------------- mkfs.fat 3.0.26 (2014-03-07) ----------------------------- mkfs.ext4 /dev/mmcblk1p2 -L rootfs ----------------------------- mke2fs 1.42.12 (29-Aug-2014) ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/mmcblk1p2 is mounted. Discarding device blocks: done Creating filesystem with 444160 4k blocks and 111104 inodes Filesystem UUID: 0fa1e2a1-6f90-4640-9db5-9c523f4a9968 Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912 Allocating group tables: done Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done ----------------------------- Copying: /dev/mmcblk0p1 -> /dev/mmcblk1p1 rsync: /boot/uboot/ -> /tmp/boot/ Copying: /dev/mmcblk0p2 -> /dev/mmcblk1p2 [ 585.521293] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) rsync: / -> /tmp/rootfs/