Texas Instruments X-Loader 1.5.1 (Jul 26 2011 - 00:39:12) Beagle Rev C4 Reading boot sector Loading u-boot.bin from mmc U-Boot 2011.09-rc2 (Sep 29 2011 - 07:46:13) OMAP35XX-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 256 MiB WARNING: Caches not enabled NAND: 256 MiB MMC: OMAP SD/MMC: 0 *** Warning - bad CRC, using default environment ERROR : Unsupport USB mode Check that mini-B USB cable is attached to the device In: serial Out: serial Err: serial Beagle Rev C4 No EEPROM on expansion board Die ID #51454d5551454d555400000051454d55 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 The user button is currently NOT pressed. SD/MMC found on device 0 reading uEnv.txt ** Unable to read "uEnv.txt" from mmc 0:1 ** reading boot.scr 508 bytes read Loaded script from boot.scr Running bootscript from mmc0 ... ## Executing script at 80200000 reading uImage 3953816 bytes read reading uInitrd 1870197 bytes read reading board.dtb 316 bytes read ## Booting kernel from Legacy Image at 80000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3953752 Bytes = 3.8 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 1870133 Bytes = 1.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 815f0000 Booting using the fdt blob at 0x815f0000 Loading Kernel Image ... OK OK Using Device Tree in place at 815f0000, end 815f313b Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 3.0.0-1007-linaro-omap (buildd@chort) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #11~ppa~natty-Ubuntu SMP PREEMPT Tue Sep 27 20:33:26 UTC 2011 (Ubuntu 3.0.0-1007.11~ppa~natty-linaro-omap 3.0.0) [ 0.000000] CPU: ARMv7 Processor [410fc083] revision 3 (ARMv7), cr=50c5387f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine: OMAP3 Beagle Board, model: TI OMAP3 BeagleBoard [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] OMAP3430/3530 ES3.1 (iva sgx neon isp ) [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000 [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz [ 0.000000] Reprogramming SDRC clock to 332000000 Hz [ 0.000000] PERCPU: Embedded 7 pages/cpu @80e4c000 s7168 r8192 d13312 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 61952 [ 0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 root=UUID=4c4f938f-6be3-471e-b38b-eeafa968aafe rootwait ro earlyprintk fixrtc nocompcache vram=12M omapfb.mode=dvi:1280x720MR-16@60 mpurate=auto [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 244MB = 244MB total [ 0.000000] Memory: 233140k/233140k available, 29004k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0x90800000 - 0xf8000000 (1656 MB) [ 0.000000] lowmem : 0x80000000 - 0x90000000 ( 256 MB) [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) [ 0.000000] modules : 0x7f800000 - 0x7fe00000 ( 6 MB) [ 0.000000] .text : 0x80008000 - 0x805f2c28 (6060 kB) [ 0.000000] .init : 0x805f3000 - 0x80646c00 ( 335 kB) [ 0.000000] .data : 0x80648000 - 0x806ccc70 ( 532 kB) [ 0.000000] .bss : 0x806ccc94 - 0x80c45118 (5602 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:410 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts omap2_inth_read: Bad register 0x000020 [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck. [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.019775] Calibrating delay loop... 684.29 BogoMIPS (lpj=2672640) [ 0.062530] pid_max: default: 32768 minimum: 301 [ 0.064025] Security Framework initialized [ 0.065429] AppArmor: AppArmor initialized [ 0.065612] Yama: becoming mindful. [ 0.066772] Mount-cache hash table entries: 512 [ 0.082550] CPU: Testing write buffer coherency: ok [ 0.084075] ftrace: allocating 24048 entries in 48 pages [ 0.148010] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.148498] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 1 counters available [ 0.200317] Brought up 1 CPUs [ 0.200561] SMP: Total of 1 processors activated (684.29 BogoMIPS). [ 0.206817] devtmpfs: initialized [ 0.238586] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core [ 0.238861] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per [ 0.239105] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup [ 0.257385] omap_hwmod: i2c1: softreset failed (waited 10000 usec) [ 0.269409] omap_hwmod: i2c2: softreset failed (waited 10000 usec) [ 0.283233] omap_hwmod: i2c3: softreset failed (waited 10000 usec) [ 0.284667] omap_hwmod: am35x_otg_hs: cannot be enabled (3) [ 0.293609] print_constraints: dummy: [ 0.295837] NET: Registered protocol family 16 [ 0.298797] GPMC revision 5.0 [ 0.321441] omap_device: omap_gpio.0: new worst case activate latency 0: 183105 [ 0.325256] OMAP GPIO hardware version 2.5 [ 0.327362] OMAP GPIO hardware version 2.5 [ 0.329101] OMAP GPIO hardware version 2.5 [ 0.330810] OMAP GPIO hardware version 2.5 [ 0.333038] OMAP GPIO hardware version 2.5 [ 0.334869] OMAP GPIO hardware version 2.5 [ 0.357299] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.361297] OMAP3 Beagle Rev: C4 [ 0.382568] omap_device: omap_uart.0: new worst case activate latency 0: 30517 [ 0.383300] omap_device: omap_uart.0: new worst case deactivate latency 0: 30517 [ 0.391021] Found NAND on CS0 [ 0.391204] Registering NAND on CS0 [ 0.393676] Unable to get DVI reset GPIO [ 0.405639] No ATAGs? [ 0.406280] hw-breakpoint: debug architecture 0x0 unsupported. [ 0.437835] OMAP DMA hardware revision 4.0 [ 0.446411] Serial: AMBA PL011 UART driver [ 0.564117] bio: create slab at 0 [ 0.579376] SCSI subsystem initialized [ 0.583312] omap_device: omap2_mcspi.1: new worst case activate latency 0: 30517 [ 0.586303] omap_device: omap2_mcspi.1: new worst case deactivate latency 0: 61035 [ 0.605499] usbcore: registered new interface driver usbfs [ 0.607238] usbcore: registered new interface driver hub [ 0.609222] usbcore: registered new device driver usb [ 0.614318] omap_device: omap_i2c.1: new worst case activate latency 0: 61035 [ 0.615112] omap_i2c omap_i2c.1: bus 1 rev3.12 at 2600 kHz [ 0.636291] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 0.636810] twl4030: power (irq 373) chaining IRQs 376..383 [ 0.639404] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 0.649261] print_constraints: VUSB1V5: 1500 mV normal standby [ 0.652343] print_constraints: VUSB1V8: 1800 mV normal standby [ 0.655090] print_constraints: VUSB3V1: 3100 mV normal standby [ 0.673614] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 0.679992] print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby [ 0.683074] print_constraints: VDAC: 1800 mV normal standby [ 0.686370] print_constraints: VPLL2: 1800 mV normal standby [ 0.690216] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby [ 0.693420] omap_device: omap_i2c.1: new worst case deactivate latency 0: 61035 [ 0.694854] omap_device: omap_i2c.3: new worst case activate latency 0: 152587 [ 0.697998] omap_i2c omap_i2c.3: bus 3 rev3.12 at 100 kHz [ 0.717041] NetLabel: Initializing [ 0.717224] NetLabel: domain hash size = 128 [ 0.717407] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.718444] NetLabel: unlabeled traffic allowed by default [ 0.719635] Switching to clocksource 32k_counter [ 0.728973] Switched to NOHz mode on CPU #0 [ 0.828674] AppArmor: AppArmor Filesystem Enabled [ 0.932098] NET: Registered protocol family 2 [ 0.933746] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.937591] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.938323] TCP bind hash table entries: 8192 (order: 6, 327680 bytes) [ 0.943786] TCP: Hash tables configured (established 8192 bind 8192) [ 0.944335] TCP reno registered [ 0.944580] UDP hash table entries: 128 (order: 1, 12288 bytes) [ 0.945220] UDP-Lite hash table entries: 128 (order: 1, 12288 bytes) [ 0.948944] NET: Registered protocol family 1 [ 0.951721] RPC: Registered named UNIX socket transport module. [ 0.951995] RPC: Registered udp transport module. [ 0.952178] RPC: Registered tcp transport module. [ 0.952362] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.956420] Trying to unpack rootfs image as initramfs... [ 1.175384] Freeing initrd memory: 1824K [ 1.182861] PMU: registered new PMU device of type 0 [ 1.191253] audit: initializing netlink socket (disabled) [ 1.192169] type=2000 audit(1.132:1): initialized [ 1.301879] Kprobe smoke test started [ 1.309936] Kprobe smoke test failed: register_jprobe returned -22 [ 1.310241] Kprobe smoke test failed: register_jprobes returned -22 [ 1.317901] BUG: Kprobe smoke test: 2 out of 6 tests failed [ 1.343017] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.348144] Btrfs loaded [ 1.348510] msgmni has been set to 458 [ 1.355682] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.356201] io scheduler noop registered [ 1.356384] io scheduler deadline registered [ 1.356811] io scheduler cfq registered (default) [ 1.424560] OMAP DSS rev 2.0 [ 1.447967] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.512084] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 1.527313] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 1.543487] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 1.545562] console [ttyO2] enabled, bootconsole disabled [ 1.545562] console [ttyO2] enabled, bootconsole disabled [ 1.567138] [drm] Initialized drm 1.1.0 20060810 [ 1.620605] brd: module loaded [ 1.645141] loop: module loaded [ 1.664703] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.665618] omap2-nand driver initializing [ 1.667388] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit) [ 1.668304] Creating 5 MTD partitions on "omap2-nand.0": [ 1.668762] 0x000000000000-0x000000080000 : "X-Loader" [ 1.680541] 0x000000080000-0x000000260000 : "U-Boot" [ 1.697082] 0x000000260000-0x000000280000 : "U-Boot Env" [ 1.703582] 0x000000280000-0x000000680000 : "Kernel" [ 1.711944] 0x000000680000-0x000010000000 : "File System" [ 1.839782] OneNAND driver initializing [ 1.850799] usbcore: registered new interface driver asix [ 1.852050] usbcore: registered new interface driver cdc_ether [ 1.855560] usbcore: registered new interface driver smsc95xx [ 1.856750] usbcore: registered new interface driver net1080 [ 1.857818] usbcore: registered new interface driver cdc_subset [ 1.858856] usbcore: registered new interface driver zaurus [ 1.859222] cdc_ncm: 01-June-2011 [ 1.860137] usbcore: registered new interface driver cdc_ncm [ 1.863525] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.877166] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 3.881378] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 3.883239] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 [ 3.893005] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 0.00 [ 3.896789] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.897155] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.897552] usb usb1: Product: OMAP-EHCI Host Controller [ 3.897827] usb usb1: Manufacturer: Linux 3.0.0-1007-linaro-omap ehci_hcd [ 3.898193] usb usb1: SerialNumber: ehci-omap.0 [ 3.912841] hub 1-0:1.0: USB hub found [ 3.914276] hub 1-0:1.0: 0 ports detected [ 3.921997] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.922882] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller [ 3.925231] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2 [ 3.926300] ohci-omap3 ohci-omap3.0: irq 76, io mem 0x48064400 [ 3.989166] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.989807] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.990386] usb usb2: Product: OMAP3 OHCI Host Controller [ 3.990875] usb usb2: Manufacturer: Linux 3.0.0-1007-linaro-omap ohci_hcd [ 3.991424] usb usb2: SerialNumber: ohci-omap3.0 [ 3.998382] hub 2-0:1.0: USB hub found [ 3.999084] hub 2-0:1.0: 3 ports detected [ 4.009002] usbcore: registered new interface driver cdc_wdm [ 4.009490] Initializing USB Mass Storage driver... [ 4.011810] usbcore: registered new interface driver usb-storage [ 4.012329] USB Mass Storage support registered. [ 4.014556] usbcore: registered new interface driver libusual [ 4.016113] usbcore: registered new interface driver usbtest [ 4.035552] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 4.045532] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1 [ 4.066009] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 4.066680] twl_rtc twl_rtc: Power up reset detected. [ 4.068084] twl_rtc twl_rtc: Enabling TWL-RTC. [ 4.069549] i2c /dev entries driver [ 4.074981] Driver for 1-wire Dallas network protocol. [ 4.078033] omap_device: omap_wdt.-1: new worst case activate latency 0: 30517 [ 4.081054] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 4.081604] omap_device: omap_wdt.-1: new worst case deactivate latency 0: 30517 [ 4.089508] omap_device: omap_i2c.1: new worst case deactivate latency 0: 91552 [ 4.090454] twl4030_wdt twl4030_wdt: Failed to register misc device [ 4.092132] twl4030_wdt: probe of twl4030_wdt failed with error -16 [ 4.098419] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 4.246887] usbcore: registered new interface driver usbhid [ 4.247283] usbhid: USB HID core driver [ 4.249755] oprofile: using arm/armv7 [ 4.251190] TCP cubic registered [ 4.251464] Initializing XFRM netlink socket [ 4.253509] NET: Registered protocol family 10 [ 4.263183] IPv6 over IPv4 tunneling driver [ 4.268493] NET: Registered protocol family 17 [ 4.269042] NET: Registered protocol family 15 [ 4.269866] Registering the dns_resolver key type [ 4.271820] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 [ 4.290832] ThumbEE CPU extension supported. [ 4.293334] Registering SWP/SWPB emulation handler [ 4.309631] omap_device: omap_i2c.1: new worst case activate latency 0: 1220703 [ 4.313964] omap_device: omap_i2c.1: new worst case deactivate latency 0: 549316 [ 4.321289] vp_forceupdate_scale_voltage: vdd_mpu TRANXDONE timeout exceeded while tryingto clear the TRANXDONE status [ 4.324157] vp_forceupdate_scale_voltage: vdd_core TRANXDONE timeout exceeded while tryingto clear the TRANXDONE status [ 4.383575] clock: disabling unused clocks to save power [ 4.390380] mmc0: new SDHC card at address 4567 [ 4.425415] mmcblk0: mmc0:4567 QEMU! 3.00 GiB [ 4.427215] fbcvt: 1280x720@60: CVT Name - .921M9-R [ 4.463165] mmcblk0: p1 p2 [ 4.505737] Console: switching to colour frame buffer device 160x45 [ 4.526489] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 4.530029] twl_rtc twl_rtc: setting system clock to 2017-04-11 21:31:40 UTC (1491946300) [ 4.559906] Freeing init memory: 332K Loading, please wait... [ 5.390777] udev[680]: starting version 167 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. [ 10.335845] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. fsck from util-linux-ng 2.17.2 rootfs: Superblock last write time is in the future. (by less than a day, probably due to the hardware clock being incorrectly set). FIXED. rootfs: clean, 7566/193536 files, 64696/773120 blocks Last login: Tue Apr 11 20:55:30 UTC 2017 on tty1 Welcome to Linaro 11.09 (GNU/Linux 3.0.0-1007-linaro-omap armv7l) * Documentation: https://wiki.linaro.org/ root@linaro-nano:~# root@linaro-nano:~# root@linaro-nano:~# cd /home/linaro/ root@linaro-nano:/home/linaro# ls -l total 3884 -rwxr-xr-x 1 root root 3974568 2017-04-11 21:31 helloworld.bin root@linaro-nano:/home/linaro# ./helloworld.bin Indumathi Duraipandian - Apr 11 2017 root@linaro-nano:/home/linaro# [ 59.119079] EXT4-fs error (device mmcblk0p2): ext4_mb_generate_buddy:736: group 0, 23515 blocks in bitmap, 23531 in gd [ 59.127075] Aborting journal on device mmcblk0p2-8. [ 59.141326] EXT4-fs error (device mmcblk0p2): ext4_journal_start_sb:296: Detected aborted journal [ 59.149505] EXT4-fs (mmcblk0p2): Remounting filesystem read-only [ 59.162292] EXT4-fs (mmcblk0p2): Remounting filesystem read-only [ 59.177734] EXT4-fs (mmcblk0p2): ext4_da_writepages: jbd2_start: 989 pages, ino 7546; err -30 root@linaro-nano:/home/linaro# root@linaro-nano:/home/linaro# ls -l total 3884 -rwxr-xr-x 1 root root 3974568 2017-04-11 21:31 helloworld.bin root@linaro-nano:/home/linaro# ./helloworld.bin Indumathi Duraipandian - Apr 11 2017 root@linaro-nano:/home/linaro#