debian@beaglebone:~$ cat DMESG-2.txt [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.94-ti-r62 (voodoo@rpi4b4g-14) (gcc version 8.3.0 (Debian 8.3.0-6)) #1buster SMP PREEMPT Sat Apr 24 00:27:24 UTC 2021 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] Normal zone: 1148 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4c0 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu s38988 r8192 d22452 u69632 [ 0.000000] pcpu-alloc: s38988 r8192 d22452 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait uboot_detected_capes=BB-W1-P8.11, coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 432812K/522240K available (13312K kernel code, 1140K rwdata, 4336K rodata, 1024K init, 350K bss, 40276K reserved, 49152K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0x(ptrval) - 0x(ptrval) (14304 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) (1141 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 351 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42210 entries in 124 pages [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000024] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000043] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000055] OMAP clocksource: timer1 at 24000000 Hz [ 0.002210] timer_probe: no matching timers found [ 0.002568] Console: colour dummy device 80x30 [ 0.002599] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.002604] This ensures that you still see kernel messages. Please [ 0.002608] update your kernel commandline. [ 0.002668] Calibrating delay loop (skipped) preset value.. 995.32 BogoMIPS (lpj=1990656) [ 0.002686] pid_max: default: 32768 minimum: 301 [ 0.002975] Security Framework initialized [ 0.002991] Yama: becoming mindful. [ 0.003135] AppArmor: AppArmor initialized [ 0.003248] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.003260] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.004364] CPU: Testing write buffer coherency: ok [ 0.004429] CPU0: Spectre v2: using BPIALL workaround [ 0.004922] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.025306] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.033208] rcu: Hierarchical SRCU implementation. [ 0.044455] EFI services will not be available. [ 0.049213] smp: Bringing up secondary CPUs ... [ 0.049227] smp: Brought up 1 node, 1 CPU [ 0.049238] SMP: Total of 1 processors activated (995.32 BogoMIPS). [ 0.049245] CPU: All CPU(s) started in SVC mode. [ 0.050965] devtmpfs: initialized [ 0.085632] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.086268] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.086296] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.090264] xor: automatically using best checksumming function neon [ 0.090280] pinctrl core: initialized pinctrl subsystem [ 0.091609] NET: Registered protocol family 16 [ 0.096787] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.189396] l4_wkup_cm:clk:0010:0: failed to disable [ 0.229710] audit: initializing netlink subsys (disabled) [ 0.233324] audit: type=2000 audit(0.220:1): state=initialized audit_enabled=0 res=1 [ 0.238988] OMAP GPIO hardware version 0.1 [ 0.263198] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.289363] raid6: using algorithm neonx8 gen() 0 MB/s [ 0.289376] raid6: .... xor() 0 MB/s, rmw enabled [ 0.289383] raid6: using neon recovery algorithm [ 0.297446] edma 49000000.edma: TI EDMA DMA engine driver [ 0.304526] SCSI subsystem initialized [ 0.305365] libata version 3.00 loaded. [ 0.305675] usbcore: registered new interface driver usbfs [ 0.305740] usbcore: registered new interface driver hub [ 0.305857] usbcore: registered new device driver usb [ 0.307862] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz [ 0.309443] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 0.310013] pps_core: LinuxPPS API ver. 1 registered [ 0.310021] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.310045] PTP clock support registered [ 0.310957] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.313577] Advanced Linux Sound Architecture Driver Initialized. [ 0.314437] NetLabel: Initializing [ 0.314449] NetLabel: domain hash size = 128 [ 0.314454] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.314543] NetLabel: unlabeled traffic allowed by default [ 0.315662] clocksource: Switched to clocksource timer1 [ 0.478486] VFS: Disk quotas dquot_6.6.0 [ 0.478603] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.479474] AppArmor: AppArmor Filesystem Enabled [ 0.492584] NET: Registered protocol family 2 [ 0.493625] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.493661] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.493703] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.493761] TCP: Hash tables configured (established 4096 bind 4096) [ 0.493898] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.493920] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.494272] NET: Registered protocol family 1 [ 0.507442] RPC: Registered named UNIX socket transport module. [ 0.507451] RPC: Registered udp transport module. [ 0.507456] RPC: Registered tcp transport module. [ 0.507461] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.508398] Unpacking initramfs... [ 1.019737] random: fast init done [ 1.229267] Freeing initrd memory: 12020K [ 1.230167] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.233372] Initialise system trusted keyrings [ 1.233837] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 1.241018] zbud: loaded [ 1.248458] NFS: Registering the id_resolver key type [ 1.248508] Key type id_resolver registered [ 1.248514] Key type id_legacy registered [ 1.248533] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.248892] fuse init (API version 7.27) [ 1.259338] Key type asymmetric registered [ 1.259353] Asymmetric key parser 'x509' registered [ 1.259459] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.264132] io scheduler noop registered [ 1.264143] io scheduler deadline registered [ 1.264459] io scheduler cfq registered (default) [ 1.264468] io scheduler mq-deadline registered [ 1.268032] pinctrl-single 44e10800.pinmux: 142 pins, size 568 [ 1.281495] gpio-of-helper ocp:cape-universal: ready [ 1.292621] gpio-clk: probe of ocp:clk_mcasp0 failed with error -17 [ 1.295242] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 1.298911] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 [ 1.309053] console [ttyS0] enabled [ 1.310231] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 31, base_baud = 3000000) is a 8250 [ 1.311228] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 32, base_baud = 3000000) is a 8250 [ 1.312425] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 33, base_baud = 3000000) is a 8250 [ 1.313398] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 34, base_baud = 3000000) is a 8250 [ 1.314324] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 35, base_baud = 3000000) is a 8250 [ 1.317978] omap_rng 48310000.rng: Random Number Generator ver. 20 [ 1.319012] sdhci: Secure Digital Host Controller Interface driver [ 1.319019] sdhci: Copyright(c) Pierre Ossman [ 1.319515] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) [ 1.319526] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.320372] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1 [ 1.321018] random: crng init done [ 1.345177] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1 [ 1.368854] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.380431] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.382445] mmc0: new high speed SDHC card at address 0007 [ 1.387908] mmcblk0: mmc0:0007 SD16G 14.5 GiB [ 1.394308] mmcblk0: p1 [ 1.423085] mmc1: new high speed MMC card at address 0001 [ 1.428557] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.429186] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.430047] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.430420] mmcblk1rpmb: mmc1:0001 S10004 partition 3 4.00 MiB, chardev (245:0) [ 1.431933] mmcblk1: p1 [ 1.467069] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.467903] eqep 48300180.eqep: ver. 1.0 [ 1.468163] eqep 48300180.eqep: count_mode:0 [ 1.468174] eqep 48300180.eqep: invert_qa:1 [ 1.468183] eqep 48300180.eqep: invert_qb:1 [ 1.468192] eqep 48300180.eqep: invert_qi:0 [ 1.468200] eqep 48300180.eqep: invert_qs:0 [ 1.468209] eqep 48300180.eqep: swap_inputs:0 [ 1.468218] eqep 48300180.eqep: QDECCTL:0x0180 [ 1.468226] eqep 48300180.eqep: QPOSINIT:0x00000000 [ 1.468234] eqep 48300180.eqep: QPOSMAX:0xffffffff [ 1.468242] eqep 48300180.eqep: QPOSCNT:0x00000000 [ 1.468251] eqep 48300180.eqep: omit_interrupt:0 [ 1.468258] eqep 48300180.eqep: QEINT:0x0800 [ 1.468266] eqep 48300180.eqep: QUPRD:0x05f5e100 [ 1.468273] eqep 48300180.eqep: QEPCTL:0x009e write [ 1.468281] eqep 48300180.eqep: QEPCTL:0x009e read [ 1.468306] eqep 48300180.eqep: irq:138, clk_rate:100000000 [ 1.468496] eqep 48302180.eqep: ver. 1.0 [ 1.468623] eqep 48302180.eqep: count_mode:0 [ 1.468633] eqep 48302180.eqep: invert_qa:1 [ 1.468641] eqep 48302180.eqep: invert_qb:1 [ 1.468650] eqep 48302180.eqep: invert_qi:0 [ 1.468658] eqep 48302180.eqep: invert_qs:0 [ 1.468666] eqep 48302180.eqep: swap_inputs:0 [ 1.468674] eqep 48302180.eqep: QDECCTL:0x0180 [ 1.468682] eqep 48302180.eqep: QPOSINIT:0x00000000 [ 1.468689] eqep 48302180.eqep: QPOSMAX:0xffffffff [ 1.468696] eqep 48302180.eqep: QPOSCNT:0x00000000 [ 1.468704] eqep 48302180.eqep: omit_interrupt:0 [ 1.468711] eqep 48302180.eqep: QEINT:0x0800 [ 1.468718] eqep 48302180.eqep: QUPRD:0x05f5e100 [ 1.468725] eqep 48302180.eqep: QEPCTL:0x009e write [ 1.468732] eqep 48302180.eqep: QEPCTL:0x009e read [ 1.468753] eqep 48302180.eqep: irq:140, clk_rate:100000000 [ 1.468923] eqep 48304180.eqep: ver. 1.0 [ 1.469040] eqep 48304180.eqep: count_mode:0 [ 1.469050] eqep 48304180.eqep: invert_qa:1 [ 1.469059] eqep 48304180.eqep: invert_qb:1 [ 1.469067] eqep 48304180.eqep: invert_qi:0 [ 1.469075] eqep 48304180.eqep: invert_qs:0 [ 1.469083] eqep 48304180.eqep: swap_inputs:0 [ 1.469090] eqep 48304180.eqep: QDECCTL:0x0180 [ 1.469098] eqep 48304180.eqep: QPOSINIT:0x00000000 [ 1.469105] eqep 48304180.eqep: QPOSMAX:0xffffffff [ 1.469112] eqep 48304180.eqep: QPOSCNT:0x00000000 [ 1.469121] eqep 48304180.eqep: omit_interrupt:0 [ 1.469128] eqep 48304180.eqep: QEINT:0x0800 [ 1.469135] eqep 48304180.eqep: QUPRD:0x05f5e100 [ 1.469142] eqep 48304180.eqep: QEPCTL:0x009e write [ 1.469149] eqep 48304180.eqep: QEPCTL:0x009e read [ 1.469168] eqep 48304180.eqep: irq:142, clk_rate:100000000 [ 1.507167] libphy: Fixed MDIO Bus: probed [ 1.508290] CAN device driver interface [ 1.509725] c_can_platform 481cc000.can: c_can_platform device registered (regs=4b0d4aed, irq=42) [ 1.510788] c_can_platform 481d0000.can: c_can_platform device registered (regs=713612c3, irq=43) [ 1.567710] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 1.567727] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.568701] MDIO: davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe] [ 1.587207] libphy: 4a101000.mdio: probed [ 1.587235] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 1.588667] cpsw 4a100000.ethernet: Detected MACID = 04:a3:16:ba:4e:b2 [ 1.588836] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 [ 1.588846] cpsw 4a100000.ethernet: ALE Table size 1024 [ 1.588887] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies) [ 1.591069] usbcore: registered new interface driver smsc95xx [ 1.593169] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.593261] ehci-platform: EHCI generic platform driver [ 1.593647] ehci-omap: OMAP-EHCI Host Controller driver [ 1.594623] usbcore: registered new interface driver usb-storage [ 1.598359] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator [ 1.598545] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0 [ 1.602180] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator [ 1.602367] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0 [ 1.606009] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 1.606054] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 [ 1.606388] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.606400] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.606408] usb usb1: Product: MUSB HDRC host driver [ 1.606415] usb usb1: Manufacturer: Linux 4.19.94-ti-r62 musb-hcd [ 1.606423] usb usb1: SerialNumber: musb-hdrc.1 [ 1.607265] hub 1-0:1.0: USB hub found [ 1.607328] hub 1-0:1.0: 1 port detected [ 1.619306] omap_rtc 44e3e000.rtc: already running [ 1.620163] omap_rtc 44e3e000.rtc: registered as rtc0 [ 1.621859] i2c /dev entries driver [ 1.626078] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.626722] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 1.630863] ledtrig-cpu: registered to indicate activity on CPUs [ 1.631442] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 1.631905] omap-aes 53500000.aes: will run requests pump with realtime priority [ 1.634553] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 1.638512] hidraw: raw HID events driver (C) Jiri Kosina [ 1.646151] gnss: GNSS driver registered with major 242 [ 1.656501] NET: Registered protocol family 10 [ 1.727396] Segment Routing with IPv6 [ 1.727538] mip6: Mobile IPv6 [ 1.727849] NET: Registered protocol family 17 [ 1.727886] can: controller area network core (rev 20170425 abi 9) [ 1.727978] NET: Registered protocol family 29 [ 1.728076] 8021q: 802.1Q VLAN Support v1.8 [ 1.728180] Key type dns_resolver registered [ 1.728187] mpls_gso: MPLS GSO support [ 1.728528] ThumbEE CPU extension supported. [ 1.728544] Registering SWP/SWPB emulation handler [ 1.728555] omap_voltage_late_init: Voltage driver support not added [ 1.736863] registered taskstats version 1 [ 1.736873] Loading compiled-in X.509 certificates [ 1.737009] zswap: loaded using pool lzo/zbud [ 1.740502] Btrfs loaded, crc32c=crc32c-generic [ 1.740616] AppArmor: AppArmor sha1 policy hashing enabled [ 1.760395] pinctrl-single 44e10800.pinmux: pin PIN108 already requested by ocp:A15_pinmux; cannot claim for 0-0070 [ 1.770982] pinctrl-single 44e10800.pinmux: pin-108 (0-0070) status -22 [ 1.777665] pinctrl-single 44e10800.pinmux: could not request pin 108 (PIN108) from group nxp_hdmi_bonelt_pins on device pinctrl-single [ 1.790007] tda998x 0-0070: Error applying setting, reverse things back [ 1.796746] tda998x: probe of 0-0070 failed with error -22 [ 1.833298] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set [ 1.834110] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 [ 1.835079] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.836190] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.836311] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.840954] cpu cpu0: Linked as a consumer to regulator.3 [ 1.841066] cpu cpu0: Dropping the link to regulator.3 [ 1.841554] cpu cpu0: Linked as a consumer to regulator.3 [ 1.845539] omap_rtc 44e3e000.rtc: setting system clock to 2021-10-13 01:08:01 UTC (1634087281) [ 1.847032] ALSA device list: [ 1.847041] No soundcards found. [ 1.853731] Freeing unused kernel memory: 1024K [ 1.854456] Run /init as init process [ 2.127771] usb 1-1: new high-speed USB device number 2 using musb-hdrc [ 2.285875] usb 1-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.04 [ 2.285893] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.285901] usb 1-1: Product: 4-Port USB 2.0 Hub [ 2.285908] usb 1-1: Manufacturer: Generic [ 2.287225] hub 1-1:1.0: USB hub found [ 2.287825] hub 1-1:1.0: 4 ports detected [ 2.575833] usb 1-1.1: new full-speed USB device number 3 using musb-hdrc [ 2.681353] usb 1-1.1: New USB device found, idVendor=0403, idProduct=ffa8, bcdDevice= 6.00 [ 2.681371] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.681379] usb 1-1.1: Product: CANUSB [ 2.681387] usb 1-1.1: Manufacturer: LAWICEL [ 2.681394] usb 1-1.1: SerialNumber: LW41I8CE [ 2.763872] usb 1-1.4: new full-speed USB device number 4 using musb-hdrc [ 2.866212] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 2.866231] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.866239] usb 1-1.4: Product: USB Receiver [ 2.866246] usb 1-1.4: Manufacturer: Logitech [ 4.751510] input: Logitech USB Receiver as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C534.0001/input/input1 [ 4.809317] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-musb-hdrc.1-1.4/input0 [ 4.822629] input: Logitech USB Receiver Mouse as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0002/input/input2 [ 4.828236] input: Logitech USB Receiver Consumer Control as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0002/input/input3 [ 4.888532] input: Logitech USB Receiver System Control as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0002/input/input4 [ 4.889364] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-musb-hdrc.1-1.4/input1 [ 4.891443] usbcore: registered new interface driver usbhid [ 4.891453] usbhid: USB HID core driver [ 22.962478] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 24.079931] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 24.080687] systemd[1]: Detected architecture arm. [ 24.099609] systemd[1]: Set hostname to . [ 25.870309] systemd[1]: Listening on Syslog Socket. [ 25.872841] systemd[1]: Listening on Journal Socket. [ 25.885893] systemd[1]: Mounting POSIX Message Queue File System... [ 25.886979] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 25.911242] systemd[1]: Mounting /sys/kernel/debug... [ 25.922798] systemd[1]: Created slice system-getty.slice. [ 25.936102] systemd[1]: Created slice User and Session Slice. [ 26.781054] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro [ 28.520641] systemd-journald[1045]: Received request to flush runtime journal from PID 1 [ 37.982214] net eth0: initializing cpsw version 1.12 (0) [ 38.069119] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) [ 38.085688] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.085709] 8021q: adding VLAN 0 to HW filter on device eth0 [ 40.108990] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 40.109081] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 45.329911] using random self ethernet address [ 45.330239] using random host ethernet address [ 45.716533] Mass Storage Function, version: 2009/09/11 [ 45.716557] LUN: removable file: (no medium) [ 46.092695] using random self ethernet address [ 46.092713] using random host ethernet address [ 46.353652] usb0: HOST MAC 04:a3:16:ba:4e:b5 [ 46.355539] usb0: MAC 04:a3:16:ba:4e:b4 [ 46.372023] usb1: HOST MAC 04:a3:16:ba:4e:b7 [ 46.372514] usb1: MAC 04:a3:16:ba:4e:b8 [ 46.606144] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 46.836664] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready [ 47.537948] cpsw 4a100000.ethernet eth0: Link is Down [ 56.498450] net eth0: initializing cpsw version 1.12 (0) [ 56.613242] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) [ 56.793338] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 56.793359] 8021q: adding VLAN 0 to HW filter on device eth0 [ 58.701003] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 58.701093] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 93.808699] usbcore: registered new interface driver usbserial_generic [ 93.808809] usbserial: USB Serial support registered for generic [ 94.564056] usbcore: registered new interface driver ftdi_sio [ 94.564181] usbserial: USB Serial support registered for FTDI USB Serial Device [ 94.564656] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected [ 94.564989] usb 1-1.1: Detected FT232RL [ 94.584311] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 96.579538] remoteproc remoteproc0: wkup_m3 is available [ 96.735977] remoteproc remoteproc0: powering up wkup_m3 [ 96.736013] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148 [ 96.736313] remoteproc remoteproc0: remote processor wkup_m3 is now up [ 96.736343] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192 [ 96.982256] PM: bootloader does not support rtc-only! debian@beaglebone:~$