[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.25 (root@PC) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #2 SMP PREEMPT Tue Dec 2 16:52:39 EET 2014 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone [ 0.000000] cma: CMA: reserved 24 MiB at 8c800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 65024 [ 0.000000] free_area_init_node: node 0, pgdat c0d04ac0, node_mem_map cfbee000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65024 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES1.0 (sgx neon ) [ 0.000000] PERCPU: Embedded 10 pages/cpu @cfbb4000 s16768 r8192 d16000 u40960 [ 0.000000] pcpu-alloc: s16768 r8192 d16000 u40960 alloc=10*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64512 [ 0.000000] Kernel command line: console=ttyO0,115200n8 run_hardware_tests capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN,BB-BONE-EMMC-2G root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 213640K/260096K available (8823K kernel code, 664K rwdata, 3444K rodata, 468K init, 5831K bss, 46456K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0c02f9c (12268 kB) [ 0.000000] .init : 0xc0c03000 - 0xc0c78180 ( 469 kB) [ 0.000000] .data : 0xc0c7a000 - 0xc0d20254 ( 665 kB) [ 0.000000] .bss : 0xc0d20254 - 0xc12d1f08 (5832 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000023] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns [ 0.000087] OMAP clocksource: timer1 at 24000000 Hz [ 0.001195] Console: colour dummy device 80x30 [ 0.001268] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001285] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001299] ... MAX_LOCK_DEPTH: 48 [ 0.001313] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001328] ... CLASSHASH_SIZE: 4096 [ 0.001342] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.001356] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.001370] ... CHAINHASH_SIZE: 16384 [ 0.001385] memory used by lock dependency info: 3695 kB [ 0.001399] per task-struct memory footprint: 1152 bytes [ 0.001457] Calibrating delay loop... 545.99 BogoMIPS (lpj=2729984) [ 0.107445] pid_max: default: 32768 minimum: 301 [ 0.108023] Security Framework initialized [ 0.108275] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.108301] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.231350] Initializing cgroup subsys net_cls [ 0.231590] CPU: Testing write buffer coherency: ok [ 0.233061] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.233162] Setting up static identity map for 0x808a41e8 - 0x808a4240 [ 0.274904] Brought up 1 CPUs [ 0.274944] SMP: Total of 1 processors activated. [ 0.274962] CPU: All CPU(s) started in SVC mode. [ 0.279006] devtmpfs: initialized [ 0.295581] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.378020] omap_hwmod: tptc0 using broken dt data from edma [ 0.378772] omap_hwmod: tptc1 using broken dt data from edma [ 0.379488] omap_hwmod: tptc2 using broken dt data from edma [ 0.392037] omap_hwmod: debugss: _wait_target_disable failed [ 0.459095] xor: measuring software checksum speed [ 0.557413] arm4regs : 682.400 MB/sec [ 0.657410] 8regs : 609.600 MB/sec [ 0.757404] 32regs : 474.000 MB/sec [ 0.857406] neon : 919.600 MB/sec [ 0.857426] xor: using function: neon (919.600 MB/sec) [ 0.857466] pinctrl core: initialized pinctrl subsystem [ 0.860456] regulator-dummy: no parameters [ 0.864502] NET: Registered protocol family 16 [ 0.874191] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.876689] cpuidle: using governor ladder [ 0.876723] cpuidle: using governor menu [ 0.888115] syscon 44e10000.control_module: regmap [mem 0x44e10000-0x44e107fb] registered [ 0.891435] syscon 44e10000.syscon: regmap [mem 0x44e10000-0x44e107ff] registered [ 0.893345] platform 49000000.edma: alias fck already exists [ 0.893399] platform 49000000.edma: alias fck already exists [ 0.893438] platform 49000000.edma: alias fck already exists [ 0.897642] OMAP GPIO hardware version 0.1 [ 0.967974] No ATAGs? [ 0.968017] hw-breakpoint: debug architecture 0x4 unsupported. [ 1.008651] bio: create slab at 0 [ 1.177842] raid6: int32x1 114 MB/s [ 1.347538] raid6: int32x2 148 MB/s [ 1.517420] raid6: int32x4 148 MB/s [ 1.687425] raid6: int32x8 162 MB/s [ 1.857424] raid6: neonx1 794 MB/s [ 2.027412] raid6: neonx2 1025 MB/s [ 2.197423] raid6: neonx4 1068 MB/s [ 2.367509] raid6: neonx8 401 MB/s [ 2.367529] raid6: using algorithm neonx4 (1068 MB/s) [ 2.367546] raid6: using intx1 recovery algorithm [ 2.400616] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 2.403474] vbat: 5000 mV [ 2.404744] vmmcsd_fixed: 3300 mV [ 2.412553] i2c-core: driver [palmas] using legacy suspend method [ 2.412580] i2c-core: driver [palmas] using legacy resume method [ 2.413718] SCSI subsystem initialized [ 2.414699] libata version 3.00 loaded. [ 2.415891] usbcore: registered new interface driver usbfs [ 2.416147] usbcore: registered new interface driver hub [ 2.416706] usbcore: registered new device driver usb [ 2.418607] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe [ 2.418683] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral [ 2.418796] omap_i2c 4819c000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c2_pins, deferring probe [ 2.418844] platform 4819c000.i2c: Driver omap_i2c requests probe deferral [ 2.419699] pps_core: LinuxPPS API ver. 1 registered [ 2.419719] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.419801] PTP clock support registered [ 2.423360] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 2.427268] Advanced Linux Sound Architecture Driver Initialized. [ 2.431544] Switched to clocksource timer1 [ 2.823457] NET: Registered protocol family 2 [ 2.826800] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 2.827082] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 2.828435] TCP: Hash tables configured (established 2048 bind 2048) [ 2.828670] TCP: reno registered [ 2.828715] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 2.829088] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 2.830976] NET: Registered protocol family 1 [ 2.833141] RPC: Registered named UNIX socket transport module. [ 2.833175] RPC: Registered udp transport module. [ 2.833194] RPC: Registered tcp transport module. [ 2.833213] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.836113] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 2.844448] futex hash table entries: 256 (order: 2, 16384 bytes) [ 3.144184] VFS: Disk quotas dquot_6.5.2 [ 3.144534] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.147679] NFS: Registering the id_resolver key type [ 3.148082] Key type id_resolver registered [ 3.148113] Key type id_legacy registered [ 3.148270] jffs2: version 2.2. (NAND) (SUMMARY) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc. [ 3.150226] fuse init (API version 7.22) [ 3.151084] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 3.153953] msgmni has been set to 465 [ 3.163118] NET: Registered protocol family 38 [ 3.163627] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 3.163723] io scheduler noop registered [ 3.163747] io scheduler deadline registered [ 3.163832] io scheduler cfq registered (default) [ 3.169178] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 3.172860] gpio-of-helper cape-universal.59: Allocated GPIO id=0 [ 3.173557] gpio-of-helper cape-universal.59: Allocated GPIO id=1 [ 3.174133] gpio-of-helper cape-universal.59: Allocated GPIO id=2 [ 3.174760] gpio-of-helper cape-universal.59: Allocated GPIO id=3 [ 3.175394] gpio-of-helper cape-universal.59: Allocated GPIO id=4 [ 3.175939] gpio-of-helper cape-universal.59: Allocated GPIO id=5 [ 3.176553] gpio-of-helper cape-universal.59: Allocated GPIO id=6 [ 3.177148] gpio-of-helper cape-universal.59: Allocated GPIO id=7 [ 3.177687] gpio-of-helper cape-universal.59: Allocated GPIO id=8 [ 3.178216] gpio-of-helper cape-universal.59: Allocated GPIO id=9 [ 3.178766] gpio-of-helper cape-universal.59: Allocated GPIO id=10 [ 3.179335] gpio-of-helper cape-universal.59: Allocated GPIO id=11 [ 3.179864] gpio-of-helper cape-universal.59: Allocated GPIO id=12 [ 3.180415] gpio-of-helper cape-universal.59: Allocated GPIO id=13 [ 3.180945] gpio-of-helper cape-universal.59: Allocated GPIO id=14 [ 3.181863] gpio-of-helper cape-universal.59: Allocated GPIO id=15 [ 3.182489] gpio-of-helper cape-universal.59: Allocated GPIO id=16 [ 3.183036] gpio-of-helper cape-universal.59: Allocated GPIO id=17 [ 3.183576] gpio-of-helper cape-universal.59: Allocated GPIO id=18 [ 3.184168] gpio-of-helper cape-universal.59: Allocated GPIO id=19 [ 3.184699] gpio-of-helper cape-universal.59: Allocated GPIO id=20 [ 3.185230] gpio-of-helper cape-universal.59: Allocated GPIO id=21 [ 3.185784] gpio-of-helper cape-universal.59: Allocated GPIO id=22 [ 3.186334] gpio-of-helper cape-universal.59: Allocated GPIO id=23 [ 3.186868] gpio-of-helper cape-universal.59: Allocated GPIO id=24 [ 3.187425] gpio-of-helper cape-universal.59: Allocated GPIO id=25 [ 3.187962] gpio-of-helper cape-universal.59: Allocated GPIO id=26 [ 3.188534] gpio-of-helper cape-universal.59: Allocated GPIO id=27 [ 3.189100] gpio-of-helper cape-universal.59: Allocated GPIO id=28 [ 3.189635] gpio-of-helper cape-universal.59: Allocated GPIO id=29 [ 3.190166] gpio-of-helper cape-universal.59: Allocated GPIO id=30 [ 3.190717] gpio-of-helper cape-universal.59: Allocated GPIO id=31 [ 3.191274] gpio-of-helper cape-universal.59: Allocated GPIO id=32 [ 3.192560] gpio-of-helper cape-universal.59: Allocated GPIO id=33 [ 3.193179] gpio-of-helper cape-universal.59: Allocated GPIO id=34 [ 3.193777] gpio-of-helper cape-universal.59: Allocated GPIO id=35 [ 3.194341] gpio-of-helper cape-universal.59: Allocated GPIO id=36 [ 3.194886] gpio-of-helper cape-universal.59: Allocated GPIO id=37 [ 3.195442] gpio-of-helper cape-universal.59: Allocated GPIO id=38 [ 3.195998] gpio-of-helper cape-universal.59: Allocated GPIO id=39 [ 3.196535] gpio-of-helper cape-universal.59: Allocated GPIO id=40 [ 3.197091] gpio-of-helper cape-universal.59: Allocated GPIO id=41 [ 3.197627] gpio-of-helper cape-universal.59: Allocated GPIO id=42 [ 3.198178] gpio-of-helper cape-universal.59: Allocated GPIO id=43 [ 3.198751] gpio-of-helper cape-universal.59: Allocated GPIO id=44 [ 3.199288] gpio-of-helper cape-universal.59: Allocated GPIO id=45 [ 3.199938] gpio-of-helper cape-universal.59: Allocated GPIO id=46 [ 3.200541] gpio-of-helper cape-universal.59: Allocated GPIO id=47 [ 3.201091] gpio-of-helper cape-universal.59: Allocated GPIO id=48 [ 3.202009] gpio-of-helper cape-universal.59: Allocated GPIO id=49 [ 3.202647] gpio-of-helper cape-universal.59: Allocated GPIO id=50 [ 3.203214] gpio-of-helper cape-universal.59: Allocated GPIO id=51 [ 3.203775] gpio-of-helper cape-universal.59: Allocated GPIO id=52 [ 3.204307] gpio-of-helper cape-universal.59: Allocated GPIO id=53 [ 3.204853] gpio-of-helper cape-universal.59: Allocated GPIO id=54 [ 3.205392] gpio-of-helper cape-universal.59: Allocated GPIO id=55 [ 3.205917] gpio-of-helper cape-universal.59: Allocated GPIO id=56 [ 3.205946] gpio-of-helper cape-universal.59: ready [ 3.218707] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.228407] omap_uart 44e09000.serial: no wakeirq for uart0 [ 3.229540] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 4.472604] console [ttyO0] enabled [ 4.478686] omap_uart 48022000.serial: no wakeirq for uart0 [ 4.485244] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 4.496914] omap_uart 48024000.serial: no wakeirq for uart0 [ 4.503368] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 4.514984] omap_uart 481a8000.serial: no wakeirq for uart0 [ 4.521328] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61, base_baud = 3000000) is a OMAP UART4 [ 4.533097] omap_uart 481aa000.serial: no wakeirq for uart0 [ 4.539411] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62, base_baud = 3000000) is a OMAP UART5 [ 4.553907] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 4.561832] [drm] Initialized drm 1.1.0 20060810 [ 4.599501] brd: module loaded [ 4.622106] loop: module loaded [ 4.626491] (hci_tty): inside hci_tty_init [ 4.631889] (hci_tty): allocated 248, 0 [ 4.728611] mtdoops: mtd device (mtddev=name/number) must be supplied [ 4.743928] usbcore: registered new interface driver asix [ 4.749805] usbcore: registered new interface driver ax88179_178a [ 4.756487] usbcore: registered new interface driver cdc_ether [ 4.762919] usbcore: registered new interface driver smsc95xx [ 4.769120] usbcore: registered new interface driver net1080 [ 4.775284] usbcore: registered new interface driver cdc_subset [ 4.781715] usbcore: registered new interface driver zaurus [ 4.787861] usbcore: registered new interface driver cdc_ncm [ 4.795163] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.802208] ehci-omap: OMAP-EHCI Host Controller driver [ 4.809424] usbcore: registered new interface driver cdc_wdm [ 4.815726] usbcore: registered new interface driver usb-storage [ 4.829296] 47401300.usb-phy supply vcc not found, using dummy regulator [ 4.878091] musb-hdrc musb-hdrc.0.auto: Failed to request rx1. [ 4.885028] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 [ 4.893432] platform musb-hdrc.0.auto: Driver musb-hdrc requests probe deferral [ 4.904127] 47401b00.usb-phy supply vcc not found, using dummy regulator [ 4.956744] musb-hdrc musb-hdrc.1.auto: Failed to request rx1. [ 4.963294] musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517 [ 4.971668] platform musb-hdrc.1.auto: Driver musb-hdrc requests probe deferral [ 5.013840] mousedev: PS/2 mouse device common for all mice [ 5.025485] i2c-core: driver [rtc-ds1307] using legacy suspend method [ 5.032577] i2c-core: driver [rtc-ds1307] using legacy resume method [ 5.042754] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 5.053041] i2c /dev entries driver [ 5.056824] Driver for 1-wire Dallas network protocol. [ 5.067975] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 5.133907] omap_hsmmc 48060000.mmc: unable to get vmmc regulator -517 [ 5.141788] platform 48060000.mmc: Driver omap_hsmmc requests probe deferral [ 5.156363] ledtrig-cpu: registered to indicate activity on CPUs [ 5.164294] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 5.176114] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 5.187815] hidraw: raw HID events driver (C) Jiri Kosina [ 5.197053] usbcore: registered new interface driver usbhid [ 5.203175] usbhid: USB HID core driver [ 5.209410] ashmem: initialized [ 5.217024] remoteproc0: wkup_m3 is available [ 5.222272] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 5.231872] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.246365] pruss-rproc 4a300000.pruss: 8 PRU interrupts parsed [ 5.246486] pruss-rproc 4a300000.pruss: memory dram0: pa 0x4a300000 size 0x2000 va d08c0000 [ 5.246545] pruss-rproc 4a300000.pruss: memory dram1: pa 0x4a302000 size 0x2000 va d08c4000 [ 5.246598] pruss-rproc 4a300000.pruss: memory shrdram2: pa 0x4a310000 size 0x3000 va d08c8000 [ 5.246649] pruss-rproc 4a300000.pruss: memory intc: pa 0x4a320000 size 0x2000 va d08cc000 [ 5.246701] pruss-rproc 4a300000.pruss: memory cfg: pa 0x4a326000 size 0x2000 va d08d0000 [ 5.247245] pruss-rproc 4a300000.pruss: creating platform devices for PRU cores [ 5.255361] remoteproc0: powering up wkup_m3 [ 5.259963] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 154768 [ 5.272959] remoteproc0: remote processor wkup_m3 is now up [ 5.280904] pru-rproc 4a334000.pru0: memory iram: pa 0x4a334000 size 0x2000 va d08d4000 [ 5.280978] pru-rproc 4a334000.pru0: memory control: pa 0x4a322000 size 0x400 va d08d8000 [ 5.281033] pru-rproc 4a334000.pru0: memory debug: pa 0x4a322400 size 0x100 va d08da400 [ 5.281912] remoteproc1: 4a334000.pru0 is available [ 5.287136] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 5.296768] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.309089] remoteproc1: failed to load rproc-pru0-fw [ 5.315100] pru-rproc 4a334000.pru0: booting the PRU core manually [ 5.321875] remoteproc1: powering up 4a334000.pru0 [ 5.327486] remoteproc1: request_firmware failed: -2 [ 5.333009] pru-rproc 4a334000.pru0: rproc_boot failed [ 5.338834] pru-rproc: probe of 4a334000.pru0 failed with error -2 [ 5.346137] pru-rproc 4a338000.pru1: memory iram: pa 0x4a338000 size 0x2000 va d08dc000 [ 5.346211] pru-rproc 4a338000.pru1: memory control: pa 0x4a324000 size 0x400 va d08e0000 [ 5.346265] pru-rproc 4a338000.pru1: memory debug: pa 0x4a324400 size 0x100 va d08e2400 [ 5.346876] remoteproc2: 4a338000.pru1 is available [ 5.352266] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 5.361720] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.373460] remoteproc2: failed to load rproc-pru1-fw [ 5.379022] pru-rproc 4a338000.pru1: booting the PRU core manually [ 5.385620] remoteproc2: powering up 4a338000.pru1 [ 5.391067] remoteproc2: request_firmware failed: -2 [ 5.396566] pru-rproc 4a338000.pru1: rproc_boot failed [ 5.402281] pru-rproc: probe of 4a338000.pru1 failed with error -2 [ 5.422032] oprofile: using arm/armv7 [ 5.426258] nf_conntrack version 0.5.0 (3722 buckets, 14888 max) [ 5.435052] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.441000] TCP: cubic registered [ 5.445171] NET: Registered protocol family 10 [ 5.454993] mip6: Mobile IPv6 [ 5.458254] NET: Registered protocol family 17 [ 5.463699] Key type dns_resolver registered [ 5.468192] mpls_gso: MPLS GSO support [ 5.472234] NET: Registered protocol family 41 [ 5.479464] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 5.488773] cpu cpu0: cpu0 clock notifier not ready, retry [ 5.494673] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 5.504322] PM: CM3 Firmware Version = 0x189 [ 5.510224] PM: bootloader does not support rtc-only! [ 5.515711] ThumbEE CPU extension supported. [ 5.520261] Registering SWP/SWPB emulation handler [ 5.529761] bio: create slab at 1 [ 5.535845] Btrfs loaded [ 5.539510] vmmcsd_fixed: disabling [ 5.543478] vbat: disabling [ 5.546428] regulator-dummy: disabling [ 5.572815] DCDC1: at 1800 mV [ 5.579339] vdd_mpu: 925 <--> 1375 mV at 1100 mV [ 5.587577] vdd_core: 925 <--> 1150 mV at 1100 mV [ 5.595725] LDO1: at 1800 mV [ 5.601896] LDO2: at 3300 mV [ 5.607904] LDO3: 1800 <--> 3300 mV at 3300 mV [ 5.615546] LDO4: at 3300 mV [ 5.622378] tps65217 0-0024: TPS65217 ID 0xf version 1.1 [ 5.630429] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 5.638211] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 5.651154] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 5.660949] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 5.670618] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 5.680375] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 5.688327] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 5.713995] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 5.714034] musb-hdrc: MHDRC RTL version 2.0 [ 5.714055] musb-hdrc: setup fifo_mode 4 [ 5.714087] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 5.736307] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 5.736347] musb-hdrc: MHDRC RTL version 2.0 [ 5.736367] musb-hdrc: setup fifo_mode 4 [ 5.736398] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 5.736824] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 5.745784] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 5.755641] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.762882] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.770454] usb usb1: Product: MUSB HDRC host driver [ 5.775723] usb usb1: Manufacturer: Linux 3.14.25 musb-hcd [ 5.781533] usb usb1: SerialNumber: musb-hdrc.1.auto [ 5.792410] hub 1-0:1.0: USB hub found [ 5.796920] hub 1-0:1.0: 1 port detected [ 5.888558] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[1100000<->1260000]:-22 [ 5.981807] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 5.988203] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 6.000194] libphy: 4a101000.mdio: probed [ 6.004833] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 6.017769] cpsw 4a100000.ethernet: Detected MACID = 50:56:63:c9:20:b8 [ 6.024871] mmc0: host does not support reading read-only switch. assuming write-enable. [ 6.039440] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.075285] mmc0: new high speed SDHC card at address aaaa [ 6.083913] ALSA device list: [ 6.087040] No soundcards found. [ 6.094516] mmcblk0: mmc0:aaaa SL08G 7.40 GiB [ 6.105849] mmcblk0: p1 p2 [ 6.139861] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.149389] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 6.168276] devtmpfs: mounted [ 6.172756] Freeing unused kernel memory: 468K (c0c03000 - c0c78000) [ 6.201780] usb 1-1: new high-speed USB device number 2 using musb-hdrc [ 6.342131] usb 1-1: device v0424 p2514 is not supported [ 6.348984] usb 1-1: New USB device found, idVendor=0424, idProduct=2514 [ 6.357018] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.370317] hub 1-1:1.0: USB hub found [ 6.375829] hub 1-1:1.0: 4 ports detected [ 6.600473] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ; angstrom) [ 6.645549] systemd[1]: Set hostname to . [ 6.663219] random: systemd urandom read with 33 bits of entropy available [ 6.670556] systemd[1]: Initializing machine ID from random generator. [ 6.679539] systemd[1]: Installed transient /etc/machine-id file. [ 6.695856] systemd[1]: Hardware watchdog 'OMAP Watchdog', version 0 [ 6.704202] systemd[1]: Set hardware watchdog to 1min. [ 7.143649] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details. [ 7.168628] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 7.179606] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.187893] systemd[1]: Expecting device dev-ttyGS0.device... [ 7.212367] systemd[1]: Expecting device dev-ttyO0.device... [ 7.232593] systemd[1]: Starting Remote File Systems. [ 7.252340] systemd[1]: Reached target Remote File Systems. [ 7.258368] systemd[1]: Starting Delayed Shutdown Socket. [ 7.282324] systemd[1]: Listening on Delayed Shutdown Socket. [ 7.288513] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 7.312347] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 7.319962] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 7.329265] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 7.338423] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 7.372351] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.383463] systemd[1]: Starting udev Kernel Socket. [ 7.412276] systemd[1]: Listening on udev Kernel Socket. [ 7.418734] systemd[1]: Starting udev Control Socket. [ 7.442332] systemd[1]: Listening on udev Control Socket. [ 7.448156] systemd[1]: Starting Swap. [ 7.472326] systemd[1]: Reached target Swap. [ 7.477020] systemd[1]: Starting Journal Socket. [ 7.502360] systemd[1]: Listening on Journal Socket. [ 7.508049] systemd[1]: Starting File System Check on Root Device... [ 7.552145] systemd[1]: Starting udev Coldplug all Devices... [ 7.589791] systemd[1]: Mounting Debug File System... [ 7.648472] systemd[1]: Started Set Up Additional Binary Formats. [ 7.674228] systemd[1]: Starting Apply Kernel Variables... [ 7.713022] systemd[1]: Starting Load Kernel Modules... [ 7.758578] systemd[1]: Mounted Huge Pages File System. [ 7.772111] systemd[1]: Started Machine ID first boot configure. [ 7.778702] systemd[1]: Mounting POSIX Message Queue File System... [ 7.837756] systemd[1]: Starting udev Kernel Device Manager... [ 7.869483] systemd[1]: Starting Journal Service... [ 7.907535] systemd[1]: Started Journal Service. [ 7.954531] systemd[1]: Mounted Debug File System. [ 7.973486] systemd[1]: Mounted POSIX Message Queue File System. [ 8.236761] systemd-udevd[95]: starting version 196 [ 8.975420] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 10.354857] random: nonblocking pool is initialized [ 12.821090] systemd-journald[96]: Received SIGUSR1 [ 12.998485] using random self ethernet address [ 13.024659] using random host ethernet address [ 13.029353] using host ethernet address: 50:56:63:C9:20:B9 [ 13.134187] using random self ethernet address [ 13.139070] using random host ethernet address [ 13.206656] using host ethernet address: 50:56:63:C9:20:B9 [ 13.265655] usb0: HOST MAC 50:56:63:c9:20:b9 [ 13.332598] usb0: MAC ea:55:9f:f2:94:ca [ 13.409576] Number of LUNs=8 [ 13.441757] Mass Storage Function, version: 2009/09/11 [ 13.447181] LUN: removable file: (no medium) [ 13.531917] Number of LUNs=1 [ 13.536306] LUN: removable file: /dev/mmcblk0p1 [ 13.541059] Number of LUNs=1 [ 13.631905] g_multi gadget: Multifunction Composite Gadget [ 13.637679] g_multi gadget: g_multi ready [ 14.054840] g_multi gadget: high-speed config #2: Multifunction with CDC ECM [ 32.449130] CAN device driver interface [ 32.535234] c_can_platform 481d0000.can: c_can_platform device registered (regs=fa1d0000, irq=71) [ 37.942206] net eth0: initializing cpsw version 1.12 (0) [ 38.022691] net eth0: phy found : id is : 0x7c0f1 [ 38.027972] libphy: PHY 4a101000.mdio:01 not found [ 38.049283] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 38.089022] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 105.704048] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 105.841817] usb 1-1: device descriptor read/64, error -71 [ 106.322307] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 111.913068] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 112.031812] usb 1-1: device descriptor read/64, error -71 [ 117.722307] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 117.841773] usb 1-1: device descriptor read/64, error -71 [ 123.532304] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 123.651908] usb 1-1: device descriptor read/64, error -71 [ 129.342279] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 129.461899] usb 1-1: device descriptor read/64, error -71 [ 135.152222] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 135.271830] usb 1-1: device descriptor read/64, error -71 [ 140.962201] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 141.082096] usb 1-1: device descriptor read/64, error -71 [ 146.772283] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 146.891805] usb 1-1: device descriptor read/64, error -71 [ 152.582356] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 152.701806] usb 1-1: device descriptor read/64, error -71 [ 158.392344] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 158.511907] usb 1-1: device descriptor read/64, error -71 [ 164.202316] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 164.321892] usb 1-1: device descriptor read/64, error -71 [ 170.012301] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 170.131815] usb 1-1: device descriptor read/64, error -71 [ 175.822131] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 175.941810] usb 1-1: device descriptor read/64, error -71 [ 181.632279] usb 1-1: reset high-speed USB device number 2 using musb-hdrc [ 181.751895] usb 1-1: device descriptor read/64, error -71 [ 187.322031] CAUTION: musb: Babble Interrupt Occurred [ 187.383062] usb 1-1: USB disconnect, device number 2 [ 187.423172] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [ 187.451338] musb-hdrc: setup fifo_mode 4 [ 187.451797] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 187.941803] usb 1-1: new high-speed USB device number 4 using musb-hdrc [ 188.082529] usb 1-1: device v0424 p2514 is not supported [ 188.088145] usb 1-1: New USB device found, idVendor=0424, idProduct=2514 [ 188.100905] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 188.125304] hub 1-1:1.0: USB hub found [ 188.129614] hub 1-1:1.0: 4 ports detected [ 600.555367] hrtimer: interrupt took 886583 ns