U-Boot SPL 2018.01 (Feb 15 2018 - 13:50:14) Trying to boot from MMC2 *** Warning - bad CRC, using default environment reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2018.03-00097-gf274f26-dirty (Mar 16 2018 - 12:50:07 -0400) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... MMC: no card present ** Bad device mmc 0 ** Failed (-5) No USB device found not set. Validating first E-fuse MAC Net: Could not get PHY for ethernet@4a100000: addr 0 eth0: ethernet@4a100000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1(part 0) is current device SD/MMC found on device 1 ** Unable to read file boot.scr ** 458 bytes read in 1 ms (447.3 KiB/s) Loaded env from uEnv.txt Importing environment from mmc1 ... Running uenvcmd ... 5768968 bytes read in 368 ms (14.9 MiB/s) 36168 bytes read in 4 ms (8.6 MiB/s) ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Loading Device Tree to 8fff4000, end 8ffffd47 ... OK Starting kernel ... Booting Linux on physical CPU 0x0 Linux version 4.12.12-yocto-standard (oe-user@oe-host) (gcc version 7.3.0 (GCC) ) #1 PREEMPT Thu Feb 15 07:09:00 EST 2018 CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt: Machine model: TI AM335x BeagleBone Black Memory policy: Data cache writeback cma: Reserved 16 MiB at 0x9e800000 CPU: All CPU(s) started in SVC mode. AM335X ES2.1 (sgx neon) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129666 Kernel command line: console=ttyO0,115200 root=/dev/mmcblk1p3 rootfstype=ext4 PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 486888K/523264K available (8192K kernel code, 778K rwdata, 2600K rodata, 1024K init, 595K bss, 19992K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) lowmem : 0xc0000000 - 0xdff00000 ( 511 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0900000 (9184 kB) .init : 0xc0d00000 - 0xc0e00000 (1024 kB) .data : 0xc0e00000 - 0xc0ec29ec ( 779 kB) .bss : 0xc0ecc6c4 - 0xc0f6134c ( 596 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 ftrace: allocating 30390 entries in 90 pages Preemptible hierarchical RCU implementation. NR_IRQS:16 nr_irqs:16 16 IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts OMAP clockevent source: timer2 at 24000000 Hz sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns OMAP clocksource: timer1 at 24000000 Hz clocksource_probe: no matching clocksources found Console: colour dummy device 80x30 Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok Setting up static identity map for 0x80100000 - 0x80100060 devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes) xor: measuring software checksum speed arm4regs : 1201.600 MB/sec 8regs : 893.200 MB/sec 32regs : 1156.400 MB/sec xor: using function: arm4regs (1201.600 MB/sec) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations omap_hwmod: debugss: _wait_target_disable failed cpuidle: using governor ladder cpuidle: using governor menu OMAP GPIO hardware version 0.1 hw-breakpoint: debug architecture 0x4 unsupported. raid6: int32x1 gen() 209 MB/s raid6: int32x1 xor() 143 MB/s raid6: int32x2 gen() 226 MB/s raid6: int32x2 xor() 162 MB/s raid6: int32x4 gen() 190 MB/s raid6: int32x4 xor() 133 MB/s raid6: int32x8 gen() 175 MB/s raid6: int32x8 xor() 118 MB/s raid6: using algorithm int32x2 gen() 226 MB/s raid6: .... xor() 162 MB/s, rmw enabled raid6: using intx1 recovery algorithm edma 49000000.edma: TI EDMA DMA engine driver SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe omap_i2c 4802a000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c1_pins, deferring probe omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe clocksource: Switched to clocksource timer1 NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. hw perfevents: no interrupt-affinity property for /pmu, guessing. hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available workingset: timestamp_bits=14 max_order=17 bucket_order=3 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 omap_uart 44e09000.serial: no wakeirq for uart0 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a OMAP UART0 console [ttyO0] enabled omap_uart 48022000.serial: no wakeirq for uart1 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a OMAP UART1 omap_uart 48024000.serial: no wakeirq for uart2 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 160, base_baud = 3000000) is a OMAP UART2 brd: module loaded mtdoops: mtd device (mtddev=name/number) must be supplied libphy: Fixed MDIO Bus: probed davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 davinci_mdio 4a101000.mdio: detected phy mask fffffffb libphy: 4a101000.mdio: probed davinci_mdio 4a101000.mdio: phy[2]: device 4a101000.mdio:02, driver SMSC LAN8710/LAN8720 random: fast init done cpsw 4a100000.ethernet: Detected MACID = 68:9e:19:8f:7c:44 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-omap: OMAP-EHCI Host Controller driver usbcore: registered new interface driver usb-storage am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator irq: no irq domain found for /ocp/i2c@44e0b000/tps@24 ! am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator musb-hdrc musb-hdrc.1: Failed to request rx1. omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 i2c /dev entries driver omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec omap_hsmmc 48060000.mmc: Got CD GPIO usbcore: registered new interface driver usbhid usbhid: USB HID core driver oprofile: using arm/armv7 u32 classifier Actions configured NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Key type dns_resolver registered omap_voltage_late_init: Voltage driver support not added ThumbEE CPU extension supported. Btrfs loaded, crc32c=crc32c-generic Key type encrypted registered mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 S10004 3.56 GiB mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB mmcblk1: p1 p2 p3 p4 tps65217 0-0024: TPS65217 ID 0xe version 1.2 omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz omap_i2c 4802a000.i2c: bus 1 rev0.11 at 50 kHz omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz musb-hdrc musb-hdrc.1: MUSB HDRC host driver musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected console [netcon0] enabled netconsole: network logging started omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) EXT4-fs (mmcblk1p3): INFO: recovery required on readonly filesystem EXT4-fs (mmcblk1p3): write access will be enabled during recovery EXT4-fs (mmcblk1p3): recovery complete EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 179:3. devtmpfs: mounted Freeing unused kernel memory: 1024K INIT: version 2.88 booting FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. EXT4-fs (mmcblk1p2): recovery complete EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (mmcblk1p4): recovery complete EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: (null) Starting udev udevd[115]: starting version 3.2.2 udevd[116]: starting eudev-3.2.2 EXT4-fs (mmcblk1p3): re-mounted. Opts: data=ordered Mon Mar 19 11:46:24 UTC 2018 INIT: Entering runlevel: 5 Configuring network interfaces... net eth0: initializing cpsw version 1.12 (0) cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 cpsw 4a100000.ethernet: ALE Table size 1024 libphy: PHY 4a101000.mdio:00 not found net eth0: phy "4a101000.mdio:00" not found on slave 0, err -19 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready done. Starting OpenBSD Secure Shell server: sshd done. Starting syslogd/klogd: done Network interface not online! Poky (Yocto Project Reference Distro) 2.4.2 beaglebone /dev/ttyO0 beaglebone login: