[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13-bone24 (root@imx6q-sabrelite-1gb-0) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Sat Jul 13 05:22:56 UTC 2013
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 130816
[    0.000000] free_area_init_node: node 0, pgdat c09c2200, node_mem_map c0a3d000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 129792 pages, LIFO batch:31
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 9 pages/cpu @c0e4c000 s14080 r8192 d14592 u36864
[    0.000000] pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129792
[    0.000000] Kernel command line: console=ttyO0,115200n8 firmware_class.path=/lib/firmware capemgr.enable_partno=cape-bone-ibb,BB-UART1,BB-UART2,BB-UART4 root=UUID=ff7c99fc-48f2-4022-a5f4-54ac655ef04a ro rootfstype=ext4 rootwait fixrtc ip=
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 1048576 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 511MB = 511MB total
[    0.000000] Memory: 504536k/504536k available, 19752k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08f79f4   (9151 kB)
[    0.000000]       .init : 0xc08f8000 - 0xc0941700   ( 294 kB)
[    0.000000]       .data : 0xc0942000 - 0xc09c51c0   ( 525 kB)
[    0.000000]        .bss : 0xc09c51c0 - 0xc0a3c5c0   ( 477 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000386] Calibrating delay loop... 363.67 BogoMIPS (lpj=354304)
[    0.017382] pid_max: default: 32768 minimum: 301
[    0.017627] Security Framework initialized
[    0.017729] Mount-cache hash table entries: 512
[    0.027314] Initializing cgroup subsys cpuacct
[    0.027350] Initializing cgroup subsys memory
[    0.027419] Initializing cgroup subsys blkio
[    0.027568] CPU: Testing write buffer coherency: ok
[    0.028165] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.028244] Setting up static identity map for 0x80633300 - 0x80633358
[    0.029914] Brought up 1 CPUs
[    0.029939] SMP: Total of 1 processors activated (363.67 BogoMIPS).
[    0.031306] devtmpfs: initialized
[    0.095643] pinctrl core: initialized pinctrl subsystem
[    0.095883] rstctl core: initialized rstctl subsystem
[    0.096388] regulator-dummy: no parameters
[    0.096935] NET: Registered protocol family 16
[    0.097963] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.107962] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.108724] platform 49000000.edma: alias fck already exists
[    0.108756] platform 49000000.edma: alias fck already exists
[    0.108780] platform 49000000.edma: alias fck already exists
[    0.110000] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.110179] OMAP GPIO hardware version 0.1
[    0.111717] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.113012] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.114391] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.114882] of_get_named_gpio_flags exited with status 52
[    0.114911] gpio-rctrl rstctl.3: loaded OK
[    0.120150] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.122301] cpsw.0: No hwaddr in dt. Using c8:a0:30:ac:aa:03 from efuse
[    0.122335] cpsw.1: No hwaddr in dt. Using c8:a0:30:ac:aa:05 from efuse
[    0.136355] bio: create slab <bio-0> at 0
[    0.147946] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.148186] of_get_named_gpio_flags: can't parse gpios property
[    0.148454] vmmcsd_fixed: 3300 mV 
[    0.151153] SCSI subsystem initialized
[    0.151562] usbcore: registered new interface driver usbfs
[    0.151682] usbcore: registered new interface driver hub
[    0.152000] usbcore: registered new device driver usb
[    0.154074] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    0.155640] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
[    0.157496] DCDC1: at 1500 mV 
[    0.158737] vdd_mpu: 925 <--> 1325 mV at 950 mV 
[    0.159864] vdd_core: 925 <--> 1150 mV at 1100 mV 
[    0.161058] LDO1: at 1800 mV 
[    0.162166] LDO2: at 3300 mV 
[    0.164147] LDO3: 1800 mV 
[    0.165258] LDO4: at 3300 mV 
[    0.166266] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[    0.167022] omap_i2c 44e0b000.i2c: unable to select pin group
[    0.167892] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[    0.170411] omap_i2c 4819c000.i2c: unable to select pin group
[    0.170633] media: Linux media interface: v0.10
[    0.170732] Linux video capture interface: v2.00
[    0.170868] pps_core: LinuxPPS API ver. 1 registered
[    0.170884] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.171580] Advanced Linux Sound Architecture Driver Initialized.
[    0.172762] NetLabel: Initializing
[    0.172782] NetLabel:  domain hash size = 128
[    0.172793] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.172910] NetLabel:  unlabeled traffic allowed by default
[    0.173301] Switching to clocksource gp_timer
[    0.229172] NET: Registered protocol family 2
[    0.230384] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.230528] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[    0.230676] TCP: Hash tables configured (established 4096 bind 4096)
[    0.230779] TCP: reno registered
[    0.230806] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.230848] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.231288] NET: Registered protocol family 1
[    0.231923] RPC: Registered named UNIX socket transport module.
[    0.231947] RPC: Registered udp transport module.
[    0.232029] RPC: Registered tcp transport module.
[    0.232044] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.232434] Trying to unpack rootfs image as initramfs...
[    0.540361] Freeing initrd memory: 2588K
[    0.541241] CPU PMU: probing PMU on CPU 0
[    0.541277] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    0.541832] omap2_mbox_probe: platform not supported
[    0.807998] VFS: Disk quotas dquot_6.5.2
[    0.808378] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.809653] NFS: Registering the id_resolver key type
[    0.809822] Key type id_resolver registered
[    0.809839] Key type id_legacy registered
[    0.809908] fuse init (API version 7.20)
[    0.810929] Btrfs loaded
[    0.811096] msgmni has been set to 990
[    0.814241] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.814270] io scheduler noop registered
[    0.814285] io scheduler deadline registered
[    0.814345] io scheduler cfq registered (default)
[    0.816291] tps65217-bl tps65217-bl: no platform data provided
[    0.816335] tps65217-bl: probe of tps65217-bl failed with error -22
[    0.817184] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.819791] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    0.820234] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    1.566373] console [ttyO0] enabled
[    1.571300] [drm] Initialized drm 1.1.0 20060810
[    1.589714] brd: module loaded
[    1.599889] loop: module loaded
[    1.603351] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.610663] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.617950] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.625233] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.632516] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.646815] bone-capemgr bone_capemgr.8: Baseboard: 'A335BNLT,0A5A,1613BBBK2649'
[    1.654624] bone-capemgr bone_capemgr.8: compatible-baseboard=ti,beaglebone-black
[    1.686678] bone-capemgr bone_capemgr.8: slot #0: 'Home Automation Cape,00A0,IBB Robert Budde,ibb'
[    1.726162] bone-capemgr bone_capemgr.8: slot #1: No cape found
[    1.763268] bone-capemgr bone_capemgr.8: slot #2: No cape found
[    1.800376] bone-capemgr bone_capemgr.8: slot #3: No cape found
[    1.806637] bone-capemgr bone_capemgr.8: slot #4: specific override
[    1.813244] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 4
[    1.821287] bone-capemgr bone_capemgr.8: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
[    1.831431] bone-capemgr bone_capemgr.8: slot #5: specific override
[    1.838035] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 5
[    1.846077] bone-capemgr bone_capemgr.8: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
[    1.856129] bone-capemgr bone_capemgr.8: slot #6: specific override
[    1.862731] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 6
[    1.870775] bone-capemgr bone_capemgr.8: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN'
[    1.881007] bone-capemgr bone_capemgr.8: enabled_partno part_number 'cape-bone-ibb', version 'N/A'
[    1.890421] bone-capemgr bone_capemgr.8: slot #7: generic override
[    1.896919] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 7
[    1.904960] bone-capemgr bone_capemgr.8: slot #7: 'Override Board Name,00A0,Override Manuf,cape-bone-ibb'
[    1.915105] bone-capemgr bone_capemgr.8: enabled_partno part_number 'BB-UART1', version 'N/A'
[    1.924055] bone-capemgr bone_capemgr.8: slot #8: generic override
[    1.930551] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 8
[    1.938591] bone-capemgr bone_capemgr.8: slot #8: 'Override Board Name,00A0,Override Manuf,BB-UART1'
[    1.948281] bone-capemgr bone_capemgr.8: enabled_partno part_number 'BB-UART2', version 'N/A'
[    1.957231] bone-capemgr bone_capemgr.8: slot #9: generic override
[    1.963727] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 9
[    1.971766] bone-capemgr bone_capemgr.8: slot #9: 'Override Board Name,00A0,Override Manuf,BB-UART2'
[    1.981447] bone-capemgr bone_capemgr.8: enabled_partno part_number 'BB-UART4', version 'N/A'
[    1.990396] bone-capemgr bone_capemgr.8: slot #10: generic override
[    1.996982] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 10
[    2.005157] bone-capemgr bone_capemgr.8: slot #10: 'Override Board Name,00A0,Override Manuf,BB-UART4'
[    2.015624] bone-capemgr bone_capemgr.8: loader: before slot-0 ibb:00A0 (prio 0)
[    2.023423] bone-capemgr bone_capemgr.8: loader: check slot-0 ibb:00A0 (prio 0)
[    2.031232] bone-capemgr bone_capemgr.8: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    2.040100] bone-capemgr bone_capemgr.8: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    2.048980] bone-capemgr bone_capemgr.8: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    2.057753] bone-capemgr bone_capemgr.8: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    2.066537] bone-capemgr bone_capemgr.8: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[    2.075401] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[    2.084284] bone-capemgr bone_capemgr.8: loader: before slot-7 cape-bone-ibb:00A0 (prio 0)
[    2.092969] bone-capemgr bone_capemgr.8: loader: check slot-7 cape-bone-ibb:00A0 (prio 0)
[    2.101664] bone-capemgr bone_capemgr.8: loader: before slot-8 BB-UART1:00A0 (prio 0)
[    2.109894] bone-capemgr bone_capemgr.8: loader: check slot-8 BB-UART1:00A0 (prio 0)
[    2.118208] bone-capemgr bone_capemgr.8: loader: before slot-9 BB-UART2:00A0 (prio 0)
[    2.126442] bone-capemgr bone_capemgr.8: loader: check slot-9 BB-UART2:00A0 (prio 0)
[    2.134613] bone-capemgr bone_capemgr.8: initialized OK.
[    2.140219] bone-capemgr bone_capemgr.8: loader: before slot-10 BB-UART4:00A0 (prio 0)
[    2.148533] bone-capemgr bone_capemgr.8: loader: check slot-10 BB-UART4:00A0 (prio 0)
[    2.158829] OneNAND driver initializing
[    2.164385] usbcore: registered new interface driver cdc_ether
[    2.170579] bone-capemgr bone_capemgr.8: loader: after slot-0 ibb:00A0 (prio 0)
[    2.178280] bone-capemgr bone_capemgr.8: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    2.187086] bone-capemgr bone_capemgr.8: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    2.195777] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[    2.204558] bone-capemgr bone_capemgr.8: loader: after slot-8 BB-UART1:00A0 (prio 0)
[    2.212705] bone-capemgr bone_capemgr.8: loader: after slot-7 cape-bone-ibb:00A0 (prio 0)
[    2.221301] bone-capemgr bone_capemgr.8: loader: after slot-9 BB-UART2:00A0 (prio 0)
[    2.229524] usbcore: registered new interface driver rndis_host
[    2.235834] bone-capemgr bone_capemgr.8: loader: after slot-10 BB-UART4:00A0 (prio 0)
[    2.244079] bone-capemgr bone_capemgr.8: slot #0: Requesting part number/version based 'ibb-00A0.dtbo
[    2.253895] usbcore: registered new interface driver cdc_ncm
[    2.259913] bone-capemgr bone_capemgr.8: slot #0: Requesting firmware 'ibb-00A0.dtbo' for board-name 'Home Automation Cape', version '00A0'
[    2.273874] usbcore: registered new interface driver cdc_acm
[    2.279852] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.288247] Initializing USB Mass Storage driver...
[    2.293900] usbcore: registered new interface driver usb-storage
[    2.300259] USB Mass Storage support registered.
[    2.305350] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    2.312175] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    2.317420] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.326203] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.326222] musb-hdrc: MHDRC RTL version 2.0 
[    2.326236] musb-hdrc: setup fifo_mode 4
[    2.326262] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.326411] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    2.331473] musb-hdrc musb-hdrc.0.auto: *** power=250
[    2.337553] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    2.342802] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.351581] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.351599] musb-hdrc: MHDRC RTL version 2.0 
[    2.351612] musb-hdrc: setup fifo_mode 4
[    2.351633] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.351762] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    2.356813] musb-hdrc musb-hdrc.1.auto: *** power=250
[    2.362130] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    2.368570] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    2.376838] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    2.376956] usb usb1: default language 0x0409
[    2.377013] usb usb1: udev 1, busnum 1, minor = 0
[    2.377036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.384179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.391762] usb usb1: Product: MUSB HDRC host driver
[    2.396985] usb usb1: Manufacturer: Linux 3.8.13-bone24 musb-hcd
[    2.403296] usb usb1: SerialNumber: musb-hdrc.1.auto
[    2.409243] usb usb1: usb_probe_device
[    2.409272] usb usb1: configuration #1 chosen from 1 choice
[    2.409342] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    2.409523] hub 1-0:1.0: usb_probe_interface
[    2.409544] hub 1-0:1.0: usb_probe_interface - got id
[    2.409573] hub 1-0:1.0: USB hub found
[    2.413704] hub 1-0:1.0: 1 port detected
[    2.417852] hub 1-0:1.0: standalone hub
[    2.417871] hub 1-0:1.0: individual port power switching
[    2.417887] hub 1-0:1.0: no over-current protection
[    2.417903] hub 1-0:1.0: Single TT
[    2.417921] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    2.417938] hub 1-0:1.0: power on to power good time: 10ms
[    2.417980] hub 1-0:1.0: local power source is good
[    2.418093] hub 1-0:1.0: enabling power on all ports
[    2.419155] mousedev: PS/2 mouse device common for all mice
[    2.427562] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    2.435126] 44e3e000.rtc: already running
[    2.439599] i2c /dev entries driver
[    2.444925] pps_ldisc: PPS line discipline registered
[    2.450409] Driver for 1-wire Dallas network protocol.
[    2.457240] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    2.465204] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    2.474229] cpuidle: using governor ladder
[    2.478594] cpuidle: using governor menu
[    2.483124] of_get_named_gpio_flags: can't parse gpios property
[    2.483144] of_get_named_gpio_flags: can't parse gpios property
[    2.483158] of_get_named_gpio_flags: can't parse gpios property
[    2.483192] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    2.490431] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    2.496871] omap_hsmmc mmc.4: unable to select pin group
[    2.502745] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    2.509961] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    2.517361] mmc.4 supply vmmc_aux not found, using dummy regulator
[    2.524042] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    2.524120] hub 1-0:1.0: hub_suspend
[    2.524162] usb usb1: bus auto-suspend, wakeup 1
[    2.524466] omap_hsmmc mmc.4: pins are not configured from the driver
[    2.558794] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7
[    2.570555] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
[    2.577870] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[    2.586870] leds-gpio gpio-leds.7: pins are not configured from the driver
[    2.594127] of_get_named_gpio_flags exited with status 53
[    2.594148] of_get_named_gpio_flags exited with status 54
[    2.594168] of_get_named_gpio_flags exited with status 55
[    2.594187] of_get_named_gpio_flags exited with status 56
[    2.594210] of_get_named_gpio_flags exited with status 53
[    2.594517] of_get_named_gpio_flags exited with status 54
[    2.594722] of_get_named_gpio_flags exited with status 55
[    2.594900] of_get_named_gpio_flags exited with status 56
[    2.595484] ledtrig-cpu: registered to indicate activity on CPUs
[    2.602309] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    2.609591] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    2.618339] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    2.624873] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    2.632079] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    2.640489] usbcore: registered new interface driver usbhid
[    2.646372] usbhid: USB HID core driver
[    2.651418] ashmem: initialized
[    2.655269] logger: created 256K log 'log_main'
[    2.660458] logger: created 256K log 'log_events'
[    2.665871] logger: created 256K log 'log_radio'
[    2.671088] logger: created 256K log 'log_system'
[    2.679133] TCP: cubic registered
[    2.682881] NET: Registered protocol family 10
[    2.688956] NET: Registered protocol family 17
[    2.694024] Key type dns_resolver registered
[    2.698921] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    2.707017] ThumbEE CPU extension supported.
[    2.711539] Registering SWP/SWPB emulation handler
[    2.717634] registered taskstats version 1
[    2.773062] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    2.779492] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    2.797631] libphy: 4a101000.mdio: probed
[    2.801964] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    2.811852] Detected MACID = c8:a0:30:ac:aa:03
[    2.816563] cpsw 4a100000.ethernet: NAPI disabled
[    2.823675] omap_rtc 44e3e000.rtc: setting system clock to 2013-07-23 12:16:02 UTC (1374581762)
[    2.840369] ALSA device list:
[    2.843551]   No soundcards found.
[    2.847954] Freeing init memory: 292K
[    2.931380] udevd[96]: starting version 175
[    3.089329] bone-capemgr bone_capemgr.8: failed to load firmware 'ibb-00A0.dtbo'
[    3.097216] bone-capemgr bone_capemgr.8: loader: failed to load slot-0 ibb:00A0 (prio 0)
[    3.105760] bone-capemgr bone_capemgr.8: slot #8: Requesting part number/version based 'BB-UART1-00A0.dtbo
[    3.115905] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[    3.124671] bone-capemgr bone_capemgr.8: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    3.133343] bone-capemgr bone_capemgr.8: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    3.150160] bone-capemgr bone_capemgr.8: slot #8: Requesting firmware 'BB-UART1-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[    3.177477] bone-capemgr bone_capemgr.8: slot #8: dtbo 'BB-UART1-00A0.dtbo' loaded; converting to live tree
[    3.187784] bone-capemgr bone_capemgr.8: slot #7: Requesting part number/version based 'cape-bone-ibb-00A0.dtbo
[    3.206764] bone-capemgr bone_capemgr.8: slot #7: Requesting firmware 'cape-bone-ibb-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[    3.224499] bone-capemgr bone_capemgr.8: slot #8: #2 overlays
[    3.240091] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    3.256107] bone-capemgr bone_capemgr.8: slot #8: Applied #2 overlays.
[    3.263031] bone-capemgr bone_capemgr.8: loader: done slot-8 BB-UART1:00A0 (prio 0)
[    3.271106] bone-capemgr bone_capemgr.8: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    3.279878] bone-capemgr bone_capemgr.8: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    3.288548] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[    4.146523] bone-capemgr bone_capemgr.8: failed to load firmware 'cape-bone-ibb-00A0.dtbo'
[    4.155272] bone-capemgr bone_capemgr.8: loader: failed to load slot-7 cape-bone-ibb:00A0 (prio 0)
[    4.164717] bone-capemgr bone_capemgr.8: slot #9: Requesting part number/version based 'BB-UART2-00A0.dtbo
[    4.174900] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[    4.183670] bone-capemgr bone_capemgr.8: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    4.192346] bone-capemgr bone_capemgr.8: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    4.208903] bone-capemgr bone_capemgr.8: slot #9: Requesting firmware 'BB-UART2-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[    4.239025] bone-capemgr bone_capemgr.8: slot #9: dtbo 'BB-UART2-00A0.dtbo' loaded; converting to live tree
[    4.249411] bone-capemgr bone_capemgr.8: slot #10: Requesting part number/version based 'BB-UART4-00A0.dtbo
[    4.267629] bone-capemgr bone_capemgr.8: slot #10: Requesting firmware 'BB-UART4-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[    4.283103] bone-capemgr bone_capemgr.8: slot #9: #2 overlays
[    4.307075] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    4.323945] bone-capemgr bone_capemgr.8: slot #10: dtbo 'BB-UART4-00A0.dtbo' loaded; converting to live tree
[    4.345587] bone-capemgr bone_capemgr.8: slot #9: Applied #2 overlays.
[    4.352486] bone-capemgr bone_capemgr.8: loader: done slot-9 BB-UART2:00A0 (prio 0)
[    4.360562] bone-capemgr bone_capemgr.8: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    4.369346] bone-capemgr bone_capemgr.8: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    4.378019] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[    4.388705] bone-capemgr bone_capemgr.8: slot #10: #2 overlays
[    4.402198] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    4.417719] bone-capemgr bone_capemgr.8: slot #10: Applied #2 overlays.
[    4.424727] bone-capemgr bone_capemgr.8: loader: done slot-10 BB-UART4:00A0 (prio 0)
[    4.432899] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[    4.441682] bone-capemgr bone_capemgr.8: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    4.450356] bone-capemgr bone_capemgr.8: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    4.459230] bone-capemgr bone_capemgr.8: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    4.467933] bone-capemgr bone_capemgr.8: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    4.476730] bone-capemgr bone_capemgr.8: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
[    4.493561] bone-capemgr bone_capemgr.8: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
[    4.504918] bone-capemgr bone_capemgr.8: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
[    4.519036] bone-capemgr bone_capemgr.8: slot #5: #4 overlays
[    4.531845] slave hdmi.11: modes-blacklisted #0 -> 1920x1080@25
[    4.540715] bone-capemgr bone_capemgr.8: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
[    4.556375] slave hdmi.11: modes-blacklisted #1 -> 832x624@75
[    4.568457] platform 4830e000.fb: alias fck already exists
[    4.575050] bone-capemgr bone_capemgr.8: slot #4: #2 overlays
[    4.589763] of_get_named_gpio_flags: can't parse gpios property
[    4.589790] tilcdc 4830e000.fb: No power control GPIO
[    4.596926] of_get_named_gpio_flags: can't parse gpios property
[    4.596945] of_get_named_gpio_flags: can't parse gpios property
[    4.596954] of_get_named_gpio_flags: can't parse gpios property
[    4.596994] gpio-rctrl rstctl.3: gpio_rctrl_request eMMC_RSTn
[    4.613175] omap_hsmmc mmc.12: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
[    4.621182] gpio-rctrl rstctl.3: gpio_rctrl_deassert eMMC_RSTn
[    4.642619] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
[    4.657925] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
[    4.665483] mmc.12 supply vmmc_aux not found, using dummy regulator
[    4.679516] omap_hsmmc mmc.12: pins are not configured from the driver
[    4.720429] bone-capemgr bone_capemgr.8: slot #4: Applied #2 overlays.
[    4.727320] bone-capemgr bone_capemgr.8: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    4.736093] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[    4.748080] tilcdc 4830e000.fb: found TDA19988
[    4.757043] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    4.764098] [drm] No driver support for vblank timestamp query.
[    4.771288] tilcdc 4830e000.fb: No connectors reported connected with modes
[    4.778691] [drm] Cannot find any crtc or sizes - going 1024x768
[    4.797497] Console: switching to colour frame buffer device 128x48
[    4.809533] tilcdc 4830e000.fb: fb0:  frame buffer device
[    4.815207] tilcdc 4830e000.fb: registered panic notifier
[    4.822078] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    4.836380] of_get_named_gpio_flags exited with status 59
[    4.838040] davinci_evm sound.13:  nxp-hdmi-hifi <-> 48038000.mcasp mapping ok
[    4.859102] bone-capemgr bone_capemgr.8: slot #5: Applied #4 overlays.
[    4.866000] bone-capemgr bone_capemgr.8: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    4.874614] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[    4.891806] bone-capemgr bone_capemgr.8: loader: after slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[    4.900722] mmc1: BKOPS_EN bit is not set
[    4.910564] mmc1: new high speed MMC card at address 0001
[    4.918737] bone-capemgr bone_capemgr.8: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.dtbo' for board-name 'Bone-Black-HDMIN', version '00A0'
[    4.937282] mmcblk0: mmc1:0001 MMC02G 1.78 GiB 
[    4.950933] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
[    4.959343] bone-capemgr bone_capemgr.8: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; converting to live tree
[    4.970810] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
[    4.979993] bone-capemgr bone_capemgr.8: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI)
[    4.989709] bone-capemgr bone_capemgr.8: slot #6: Failed verification
[    4.996477] bone-capemgr bone_capemgr.8: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
[    5.006267]  mmcblk0: p1 p2
[    5.017223]  mmcblk0boot1: unknown partition table
[    5.029073]  mmcblk0boot0: unknown partition table
[    5.438469] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    6.899783] udevd[364]: starting version 175
[    9.302232] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    9.722921] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[   15.012336] net eth0: initializing cpsw version 1.12 (0)
[   15.021863] net eth0: phy found : id is : 0x7c0f1
[   15.027000] libphy: PHY 4a101000.mdio:01 not found
[   15.032047] net eth0: phy 4a101000.mdio:01 not found on slave 1
[   15.044183] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.170032] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[   19.176055] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   26.475895]  gadget: using random self ethernet address
[   26.486609] usb0: MAC ba:95:71:de:b2:d4
[   26.490737] usb0: HOST MAC c8:a0:30:ac:aa:05
[   26.507540]  gadget: Mass Storage Function, version: 2009/09/11
[   26.513831]  gadget: Number of LUNs=1
[   26.523792]  lun0: LUN: removable file: /dev/mmcblk0p1
[   26.535513]  gadget: Multifunction Composite Gadget
[   26.549149]  gadget: g_multi ready
[   26.556922] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
[   26.574254] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
[   26.609110] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup
[   26.609213] usb usb2: default language 0x0409
[   26.609250] usb usb2: udev 1, busnum 2, minor = 128
[   26.609264] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   26.616453] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   26.624027] usb usb2: Product: MUSB HDRC host driver
[   26.629233] usb usb2: Manufacturer: Linux 3.8.13-bone24 musb-hcd
[   26.635528] usb usb2: SerialNumber: musb-hdrc.0.auto
[   26.665418] usb usb2: usb_probe_device
[   26.665445] usb usb2: configuration #1 chosen from 1 choice
[   26.665518] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[   26.666574] hub 2-0:1.0: usb_probe_interface
[   26.666593] hub 2-0:1.0: usb_probe_interface - got id
[   26.666619] hub 2-0:1.0: USB hub found
[   26.687340] hub 2-0:1.0: 1 port detected
[   26.697021] hub 2-0:1.0: standalone hub
[   26.697046] hub 2-0:1.0: individual port power switching
[   26.697056] hub 2-0:1.0: no over-current protection
[   26.697066] hub 2-0:1.0: Single TT
[   26.697078] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
[   26.697088] hub 2-0:1.0: power on to power good time: 10ms
[   26.697139] hub 2-0:1.0: local power source is good
[   26.697245] hub 2-0:1.0: enabling power on all ports
[   26.798668] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
[   26.798741] hub 2-0:1.0: hub_suspend
[   26.798770] usb usb2: bus auto-suspend, wakeup 1
[   28.978412] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[78639.892368] bone-capemgr bone_capemgr.8: part_number 'ibb-i2c', version 'N/A'
[78639.902572] bone-capemgr bone_capemgr.8: slot #12: generic override
[78639.909345] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 12
[78639.917554] bone-capemgr bone_capemgr.8: slot #12: 'Override Board Name,00A0,Override Manuf,ibb-i2c'
[78639.927739] bone-capemgr bone_capemgr.8: slot #12: Requesting part number/version based 'ibb-i2c-00A0.dtbo
[78639.938006] bone-capemgr bone_capemgr.8: slot #12: Requesting firmware 'ibb-i2c-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[78639.967750] bone-capemgr bone_capemgr.8: slot #12: dtbo 'ibb-i2c-00A0.dtbo' loaded; converting to live tree
[78639.979592] bone-capemgr bone_capemgr.8: slot #12: #1 overlays
[78640.013813] rtc-ds1307 1-0068: rtc core: registered ds3231 as rtc1
[78640.069046] i2c i2c-1: Added multiplexed i2c bus 2
[78640.080847] i2c i2c-1: Added multiplexed i2c bus 3
[78640.096509] i2c i2c-1: Added multiplexed i2c bus 4
[78640.111486] i2c i2c-1: Added multiplexed i2c bus 5
[78640.116764] pca954x 1-0070: registered 4 multiplexed busses for I2C switch pca9545
[78640.141083] bone-capemgr bone_capemgr.8: slot #12: Applied #1 overlays.