[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.11 (koen@rrMBP) (gcc version 4.7.3 20130205 (prerelease) (Linaro GCC 4.7-2013.02-01) ) #1 SMP Wed May 8 07:34:27 CEST 2013
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 130816
[    0.000000] free_area_init_node: node 0, pgdat c066cd80, node_mem_map c06c8000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 129792 pages, LIFO batch:31
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0ad7000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129792
[    0.000000] Kernel command line: console=ttyO0,115200n8 quiet root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 1048576 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 511MB = 511MB total
[    0.000000] Memory: 510672k/510672k available, 13616k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc05c862c   (5890 kB)
[    0.000000]       .init : 0xc05c9000 - 0xc05fb4c0   ( 202 kB)
[    0.000000]       .data : 0xc05fc000 - 0xc066dca0   ( 456 kB)
[    0.000000]        .bss : 0xc066dca0 - 0xc06c76bc   ( 359 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000353] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015434] pid_max: default: 32768 minimum: 301
[    0.015666] Security Framework initialized
[    0.015759] Mount-cache hash table entries: 512
[    0.025514] Initializing cgroup subsys cpuacct
[    0.025546] Initializing cgroup subsys memory
[    0.025609] Initializing cgroup subsys blkio
[    0.025753] CPU: Testing write buffer coherency: ok
[    0.026275] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.026353] Setting up static identity map for 0x8036d560 - 0x8036d5ac
[    0.027744] Brought up 1 CPUs
[    0.027767] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.028953] devtmpfs: initialized
[    0.093593] pinctrl core: initialized pinctrl subsystem
[    0.093811] rstctl core: initialized rstctl subsystem
[    0.094237] regulator-dummy: no parameters
[    0.094741] NET: Registered protocol family 16
[    0.095624] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.105537] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.106296] platform 49000000.edma: alias fck already exists
[    0.106329] platform 49000000.edma: alias fck already exists
[    0.106356] platform 49000000.edma: alias fck already exists
[    0.107554] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.107730] OMAP GPIO hardware version 0.1
[    0.109047] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.110345] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.111777] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.112309] of_get_named_gpio_flags exited with status 52
[    0.112339] gpio-rctrl rstctl.3: loaded OK
[    0.117827] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.120013] cpsw.0: No hwaddr in dt. Using c8:a0:30:ab:74:6c from efuse
[    0.120046] cpsw.1: No hwaddr in dt. Using c8:a0:30:ab:74:6e from efuse
[    0.134369] bio: create slab <bio-0> at 0
[    0.146178] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.146445] of_get_named_gpio_flags: can't parse gpios property
[    0.146688] vmmcsd_fixed: 3300 mV 
[    0.149443] SCSI subsystem initialized
[    0.149855] usbcore: registered new interface driver usbfs
[    0.149962] usbcore: registered new interface driver hub
[    0.150288] usbcore: registered new device driver usb
[    0.152328] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    0.154548] DCDC1: at 1500 mV 
[    0.155682] vdd_mpu: 925 <--> 1325 mV at 1100 mV 
[    0.156852] vdd_core: 925 <--> 1150 mV at 1100 mV 
[    0.157946] LDO1: at 1800 mV 
[    0.159082] LDO2: at 3300 mV 
[    0.161048] LDO3: 1800 mV 
[    0.162153] LDO4: at 3300 mV 
[    0.163131] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[    0.163829] omap_i2c 44e0b000.i2c: unable to select pin group
[    0.164614] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[    0.166960] omap_i2c 4819c000.i2c: unable to select pin group
[    0.167172] media: Linux media interface: v0.10
[    0.167287] Linux video capture interface: v2.00
[    0.168074] Advanced Linux Sound Architecture Driver Initialized.
[    0.169326] Switching to clocksource gp_timer
[    0.187280] NET: Registered protocol family 2
[    0.188273] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.188414] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[    0.188577] TCP: Hash tables configured (established 4096 bind 4096)
[    0.188670] TCP: reno registered
[    0.188696] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.188743] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.189226] NET: Registered protocol family 1
[    0.189798] RPC: Registered named UNIX socket transport module.
[    0.189817] RPC: Registered udp transport module.
[    0.189831] RPC: Registered tcp transport module.
[    0.189844] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.190855] CPU PMU: probing PMU on CPU 0
[    0.190974] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    0.191455] omap2_mbox_probe: platform not supported
[    0.195344] VFS: Disk quotas dquot_6.5.2
[    0.195587] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.196833] NFS: Registering the id_resolver key type
[    0.196937] Key type id_resolver registered
[    0.196955] Key type id_legacy registered
[    0.197023] jffs2: version 2.2. (NAND) (SUMMARY)  \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc.
[    0.197458] msgmni has been set to 997
[    0.200306] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.200333] io scheduler noop registered
[    0.200348] io scheduler deadline registered
[    0.200388] io scheduler cfq registered (default)
[    0.201928] tps65217-bl tps65217-bl: no platform data provided
[    0.201968] tps65217-bl: probe of tps65217-bl failed with error -22
[    0.202944] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.205418] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    0.205702] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    0.217984] console [ttyO0] enabled
[    0.219051] [drm] Initialized drm 1.1.0 20060810
[    0.232732] brd: module loaded
[    0.239672] loop: module loaded
[    0.239844] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    0.239922] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    0.239993] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    0.240074] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    0.240142] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    0.247202] bone-capemgr bone_capemgr.9: Baseboard: 'A335BNLT,0A5A,1713BBBK1730'
[    0.247242] bone-capemgr bone_capemgr.9: compatible-baseboard=ti,beaglebone-black
[    0.274919] bone-capemgr bone_capemgr.9: slot #0: No cape found
[    0.312028] bone-capemgr bone_capemgr.9: slot #1: No cape found
[    0.349135] bone-capemgr bone_capemgr.9: slot #2: No cape found
[    0.386245] bone-capemgr bone_capemgr.9: slot #3: No cape found
[    0.392500] bone-capemgr bone_capemgr.9: slot #4: specific override
[    0.392543] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4
[    0.392573] bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
[    0.392726] bone-capemgr bone_capemgr.9: slot #5: specific override
[    0.392764] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5
[    0.392792] bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
[    0.393292] bone-capemgr bone_capemgr.9: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    0.393319] bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    0.393382] bone-capemgr bone_capemgr.9: initialized OK.
[    0.395322] OneNAND driver initializing
[    0.396042] bone-capemgr bone_capemgr.9: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    0.396084] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
[    0.396115] bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
[    0.396376] bone-capemgr bone_capemgr.9: slot #4: #2 overlays
[    0.396676] bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays.
[    0.396704] bone-capemgr bone_capemgr.9: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    0.397705] usbcore: registered new interface driver asix
[    0.397828] usbcore: registered new interface driver cdc_ether
[    0.398058] bone-capemgr bone_capemgr.9: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    0.398085] bone-capemgr bone_capemgr.9: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    0.398111] bone-capemgr bone_capemgr.9: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    0.398147] bone-capemgr bone_capemgr.9: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
[    0.398185] bone-capemgr bone_capemgr.9: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
[    0.398586] bone-capemgr bone_capemgr.9: slot #5: #4 overlays
[    0.400054] usbcore: registered new interface driver smsc95xx
[    0.400174] usbcore: registered new interface driver net1080
[    0.400265] usbcore: registered new interface driver cdc_subset
[    0.400352] usbcore: registered new interface driver zaurus
[    0.400531] usbcore: registered new interface driver cdc_ncm
[    0.401360] usbcore: registered new interface driver cdc_acm
[    0.401379] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.401392] Initializing USB Mass Storage driver...
[    0.401514] usbcore: registered new interface driver usb-storage
[    0.401528] USB Mass Storage support registered.
[    0.401709] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    0.402194] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    0.402223] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:462 dsps_musb_init: OK
[    0.402262] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    0.402281] musb-hdrc: MHDRC RTL version 2.0 
[    0.402295] musb-hdrc: setup fifo_mode 4
[    0.402323] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    0.402460] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    0.402482] musb-hdrc musb-hdrc.0.auto: *** power=250
[    0.404034] platform 4830e000.fb: alias fck already exists
[    0.405601] bone-capemgr bone_capemgr.9: slot #5: Applied #4 overlays.
[    0.405631] bone-capemgr bone_capemgr.9: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    0.405996] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    0.406023] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:462 dsps_musb_init: OK
[    0.406064] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    0.406083] musb-hdrc: MHDRC RTL version 2.0 
[    0.406097] musb-hdrc: setup fifo_mode 4
[    0.406121] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    0.406251] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    0.406273] musb-hdrc musb-hdrc.1.auto: *** power=250
[    0.406294] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    0.406704] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    0.406752] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    0.406858] usb usb1: default language 0x0409
[    0.406918] usb usb1: udev 1, busnum 1, minor = 0
[    0.406941] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.406962] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.406983] usb usb1: Product: MUSB HDRC host driver
[    0.407002] usb usb1: Manufacturer: Linux 3.8.11 musb-hcd
[    0.407021] usb usb1: SerialNumber: musb-hdrc.1.auto
[    0.407917] usb usb1: usb_probe_device
[    0.407945] usb usb1: configuration #1 chosen from 1 choice
[    0.408013] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    0.408233] hub 1-0:1.0: usb_probe_interface
[    0.408256] hub 1-0:1.0: usb_probe_interface - got id
[    0.408286] hub 1-0:1.0: USB hub found
[    0.408334] hub 1-0:1.0: 1 port detected
[    0.408354] hub 1-0:1.0: standalone hub
[    0.408371] hub 1-0:1.0: individual port power switching
[    0.408388] hub 1-0:1.0: no over-current protection
[    0.408406] hub 1-0:1.0: Single TT
[    0.408426] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    0.408445] hub 1-0:1.0: power on to power good time: 10ms
[    0.408485] hub 1-0:1.0: local power source is good
[    0.408591] hub 1-0:1.0: enabling power on all ports
[    0.409820] mousedev: PS/2 mouse device common for all mice
[    0.411928] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    0.412262] i2c /dev entries driver
[    0.414055] Driver for 1-wire Dallas network protocol.
[    0.415477] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    0.415916] cpuidle: using governor ladder
[    0.415937] cpuidle: using governor menu
[    0.416321] of_get_named_gpio_flags: can't parse gpios property
[    0.416339] of_get_named_gpio_flags: can't parse gpios property
[    0.416355] of_get_named_gpio_flags: can't parse gpios property
[    0.416390] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    0.423640] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    0.423692] omap_hsmmc mmc.4: unable to select pin group
[    0.423980] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    0.424066] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    0.424310] mmc.4 supply vmmc_aux not found, using dummy regulator
[    0.424449] omap_hsmmc mmc.4: pins are not configured from the driver
[    0.450854] of_get_named_gpio_flags: can't parse gpios property
[    0.450877] of_get_named_gpio_flags: can't parse gpios property
[    0.450893] of_get_named_gpio_flags: can't parse gpios property
[    0.450945] gpio-rctrl rstctl.3: gpio_rctrl_request eMMC_RSTn
[    0.451037] omap_hsmmc mmc.5: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
[    0.451059] gpio-rctrl rstctl.3: gpio_rctrl_deassert eMMC_RSTn
[    0.451445] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
[    0.451619] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
[    0.452086] mmc.5 supply vmmc_aux not found, using dummy regulator
[    0.452215] omap_hsmmc mmc.5: pins are not configured from the driver
[    0.480540] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
[    0.492281] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
[    0.499591] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[    0.508575] leds-gpio gpio-leds.8: pins are not configured from the driver
[    0.508616] of_get_named_gpio_flags exited with status 53
[    0.508639] of_get_named_gpio_flags exited with status 54
[    0.508662] of_get_named_gpio_flags exited with status 55
[    0.508684] of_get_named_gpio_flags exited with status 56
[    0.508708] of_get_named_gpio_flags exited with status 53
[    0.508932] of_get_named_gpio_flags exited with status 54
[    0.509136] of_get_named_gpio_flags exited with status 55
[    0.509403] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    0.509474] hub 1-0:1.0: hub_suspend
[    0.509515] usb usb1: bus auto-suspend, wakeup 1
[    0.509777] of_get_named_gpio_flags exited with status 56
[    0.510171] ledtrig-cpu: registered to indicate activity on CPUs
[    0.510595] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    0.510676] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    0.512906] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    0.513037] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    0.513117] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    0.514329] usbcore: registered new interface driver usbhid
[    0.514347] usbhid: USB HID core driver
[    0.516598] of_get_named_gpio_flags exited with status 59
[    0.518130] davinci_evm sound.13:  nxp-hdmi-hifi <-> 48038000.mcasp mapping ok
[    0.522072] TCP: cubic registered
[    0.522091] Initializing XFRM netlink socket
[    0.522135] NET: Registered protocol family 17
[    0.522289] NET: Registered protocol family 15
[    0.522423] Key type dns_resolver registered
[    0.522751] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.522809] ThumbEE CPU extension supported.
[    0.522855] Registering SWP/SWPB emulation handler
[    0.524138] registered taskstats version 1
[    0.527456] of_get_named_gpio_flags: can't parse gpios property
[    0.527488] tilcdc 4830e000.fb: No power control GPIO
[    0.563624] mmc1: BKOPS_EN bit is not set
[    0.566276] mmc1: new high speed MMC card at address 0001
[    0.567064] mmcblk0: mmc1:0001 MMC02G 1.78 GiB 
[    0.567433] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
[    0.567778] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
[    0.570078]  mmcblk0: p1 p2
[    0.572865]  mmcblk0boot1: unknown partition table
[    0.574879]  mmcblk0boot0: unknown partition table
[    0.637336] tilcdc 4830e000.fb: found TDA19988
[    0.637451] usb usb1: usb wakeup-resume
[    0.637518] usb usb1: usb auto-resume
[    0.637548] hub 1-0:1.0: hub_resume
[    0.637624] hub 1-0:1.0: port 1: status 0101 change 0001
[    0.638507] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    0.638525] [drm] No driver support for vblank timestamp query.
[    0.638925] tilcdc 4830e000.fb: No connectors reported connected with modes
[    0.638953] [drm] Cannot find any crtc or sizes - going 1024x768
[    0.656269] Console: switching to colour frame buffer device 128x48
[    0.669444] tilcdc 4830e000.fb: fb0:  frame buffer device
[    0.669465] tilcdc 4830e000.fb: registered panic notifier
[    0.669504] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    0.720262] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    0.720292] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    0.721289] libphy: 4a101000.mdio: probed
[    0.721320] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    0.721540] Detected MACID = c8:a0:30:ab:74:6c
[    0.721670] cpsw 4a100000.ethernet: NAPI disabled
[    0.723183] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    0.730454] ALSA device list:
[    0.730477]   #0: TI BeagleBone Black
[    0.736571] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    0.736589] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    0.739813] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[    0.739859] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[    0.845236] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[    0.965371] usb 1-1: default language 0x0409
[    0.965665] usb 1-1: udev 2, busnum 1, minor = 1
[    0.965681] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[    0.965694] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    0.965705] usb 1-1: Product: USB2.0 Hub
[    0.966121] usb 1-1: usb_probe_device
[    0.966139] usb 1-1: configuration #1 chosen from 1 choice
[    0.966419] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[    0.966545] hub 1-1:1.0: usb_probe_interface
[    0.966559] hub 1-1:1.0: usb_probe_interface - got id
[    0.966578] hub 1-1:1.0: USB hub found
[    0.966875] hub 1-1:1.0: 4 ports detected
[    0.966888] hub 1-1:1.0: standalone hub
[    0.966898] hub 1-1:1.0: ganged power switching
[    0.966908] hub 1-1:1.0: global over-current protection
[    0.967200] hub 1-1:1.0: TT per port
[    0.967214] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
[    0.967224] hub 1-1:1.0: Port indicators are supported
[    0.967235] hub 1-1:1.0: power on to power good time: 100ms
[    0.967597] hub 1-1:1.0: local power source is good
[    0.967608] hub 1-1:1.0: no over-current condition exists
[    0.967800] hub 1-1:1.0: enabling power on all ports
[    0.969119] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[    0.969149] hub 1-0:1.0: port 1 enable change, status 00000503
[    1.070148] hub 1-1:1.0: port 1: status 0101 change 0001
[    1.070650] hub 1-1:1.0: port 2: status 0101 change 0001
[    1.171471] hub 1-1:1.0: state 7 ports 4 chg 0006 evt 0000
[    1.171768] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
[    1.238086] usb 1-1.1: new high-speed USB device number 3 using musb-hdrc
[    1.318876] usb 1-1.1: default language 0x0409
[    1.319202] usb 1-1.1: udev 3, busnum 1, minor = 2
[    1.319217] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0610
[    1.319229] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.319241] usb 1-1.1: Product: USB2.0 Hub
[    1.319674] usb 1-1.1: usb_probe_device
[    1.319692] usb 1-1.1: configuration #1 chosen from 1 choice
[    1.319983] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
[    1.320104] hub 1-1.1:1.0: usb_probe_interface
[    1.320118] hub 1-1.1:1.0: usb_probe_interface - got id
[    1.320135] hub 1-1.1:1.0: USB hub found
[    1.320451] hub 1-1.1:1.0: 4 ports detected
[    1.320464] hub 1-1.1:1.0: standalone hub
[    1.320474] hub 1-1.1:1.0: ganged power switching
[    1.320484] hub 1-1.1:1.0: global over-current protection
[    1.320782] hub 1-1.1:1.0: TT per port
[    1.320797] hub 1-1.1:1.0: TT requires at most 32 FS bit times (2664 ns)
[    1.320807] hub 1-1.1:1.0: Port indicators are supported
[    1.320818] hub 1-1.1:1.0: power on to power good time: 100ms
[    1.321197] hub 1-1.1:1.0: local power source is good
[    1.321209] hub 1-1.1:1.0: no over-current condition exists
[    1.321404] hub 1-1.1:1.0: enabling power on all ports
[    1.322862] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[    1.388397] usb 1-1.2: new high-speed USB device number 4 using musb-hdrc
[    1.423583] hub 1-1.1:1.0: port 1: status 0101 change 0001
[    1.471284] usb 1-1.2: default language 0x0409
[    1.478221] usb 1-1.2: udev 4, busnum 1, minor = 3
[    1.478236] usb 1-1.2: New USB device found, idVendor=0951, idProduct=1607
[    1.478248] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.478259] usb 1-1.2: Product: DataTraveler 2.0
[    1.478270] usb 1-1.2: Manufacturer: Kingston
[    1.478280] usb 1-1.2: SerialNumber: 5B831A00025D
[    1.478642] usb 1-1.2: usb_probe_device
[    1.478658] usb 1-1.2: configuration #1 chosen from 1 choice
[    1.478725] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[    1.478921] usb-storage 1-1.2:1.0: usb_probe_interface
[    1.478945] usb-storage 1-1.2:1.0: usb_probe_interface - got id
[    1.479218] scsi0 : usb-storage 1-1.2:1.0
[    1.479790] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0004
[    1.524950] hub 1-1.1:1.0: state 7 ports 4 chg 0002 evt 0000
[    1.525213] hub 1-1.1:1.0: port 1, status 0101, change 0000, 12 Mb/s
[    1.591513] usb 1-1.1.1: new high-speed USB device number 5 using musb-hdrc
[    1.672087] usb 1-1.1.1: default language 0x0409
[    1.672641] usb 1-1.1.1: udev 5, busnum 1, minor = 4
[    1.672655] usb 1-1.1.1: New USB device found, idVendor=0bda, idProduct=8176
[    1.672668] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.672679] usb 1-1.1.1: Product: 802.11n WLAN Adapter
[    1.672689] usb 1-1.1.1: Manufacturer: Realtek
[    1.672700] usb 1-1.1.1: SerialNumber: 00e04c000001
[    1.673060] usb 1-1.1.1: usb_probe_device
[    1.673075] usb 1-1.1.1: configuration #1 chosen from 1 choice
[    1.673208] usb 1-1.1.1: adding 1-1.1.1:1.0 (config #1, interface 0)
[    2.483278] scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[    2.722776] sd 0:0:0:0: [sda] 3903488 512-byte logical blocks: (1.99 GB/1.86 GiB)
[    2.722983] sd 0:0:0:0: [sda] Write Protect is off
[    2.722999] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[    2.723182] sd 0:0:0:0: [sda] No Caching mode page present
[    2.728946] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    2.736764] sd 0:0:0:0: [sda] No Caching mode page present
[    2.742511] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    2.749659]  sda: sda1
[    2.751049] sd 0:0:0:0: [sda] No Caching mode page present
[    2.756833] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    2.763211] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    6.737279] EXT4-fs (mmcblk0p2): recovery complete
[    6.743128] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    6.743196] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    6.746384] devtmpfs: mounted
[    6.746609] Freeing init memory: 200K
[    6.972788] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ; angstrom)
[    7.018625] systemd[1]: Inserted module 'autofs4'
[    7.020625] systemd[1]: Set hostname to <beaglebone>.
[    7.333390] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.334012] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.334131] systemd[1]: Expecting device dev-ttyO0.device...
[    7.334234] systemd[1]: Starting Remote File Systems.
[    7.334306] systemd[1]: Reached target Remote File Systems.
[    7.334373] systemd[1]: Starting Delayed Shutdown Socket.
[    7.334566] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.334632] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.334796] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.334888] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    7.335139] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.335401] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.336208] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.336737] systemd[1]: Starting udev Kernel Socket.
[    7.336962] systemd[1]: Listening on udev Kernel Socket.
[    7.337309] systemd[1]: Starting udev Control Socket.
[    7.337698] systemd[1]: Listening on udev Control Socket.
[    7.337791] systemd[1]: Starting Swap.
[    7.337862] systemd[1]: Reached target Swap.
[    7.337957] systemd[1]: Starting Journal Socket.
[    7.338291] systemd[1]: Listening on Journal Socket.
[    7.338448] systemd[1]: Starting File System Check on Root Device...
[    7.344840] systemd[1]: Mounting POSIX Message Queue File System...
[    7.356759] systemd[1]: Starting Apply Kernel Variables...
[    7.359940] systemd[1]: Starting Journal Service...
[    7.367578] systemd[1]: Started Journal Service.
[    7.367844] systemd[1]: Started Machine ID first boot configure.
[    7.367969] systemd[1]: Mounted Huge Pages File System.
[    7.368413] systemd[1]: Starting udev Kernel Device Manager...
[    7.375854] systemd[1]: Starting udev Coldplug all Devices...
[    7.389196] systemd[1]: Starting Load Kernel Modules...
[    7.394585] systemd[1]: Mounting Debug File System...
[    7.407349] systemd[1]: Started Set Up Additional Binary Formats.
[    7.609415] Bluetooth: Core ver 2.16
[    7.609499] NET: Registered protocol family 31
[    7.609570] Bluetooth: HCI device and connection manager initialized
[    7.610423] Bluetooth: HCI socket layer initialized
[    7.610448] Bluetooth: L2CAP socket layer initialized
[    7.610495] Bluetooth: SCO socket layer initialized
[    7.620420] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    7.620471] Bluetooth: HIDP socket layer initialized
[    7.706970] systemd-udevd[91]: starting version 196
[    7.717949] NET: Registered protocol family 10
[    7.775279] NET: Registered protocol family 23
[    7.783394] IrCOMM protocol (Dag Brattli)
[    7.847348] Bluetooth: RFCOMM TTY layer initialized
[    7.847424] Bluetooth: RFCOMM socket layer initialized
[    7.847435] Bluetooth: RFCOMM ver 1.11
[    8.054383] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    9.421552] systemd-journald[90]: Received SIGUSR1
[   10.150548] systemd-journald[90]: File /var/log/journal/07c7c0d4c8fc4a26b6d7eedebe60d687/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   10.621945] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.637100] udc musb-hdrc.0.auto: registering UDC driver [g_multi]
[   11.637210]  gadget: using random self ethernet address
[   11.637996] usb0: MAC 4e:de:d4:a2:3e:78
[   11.638010] usb0: HOST MAC c8:a0:30:ab:74:69
[   11.644239] gserial_setup: registered 1 ttyGS* device
[   11.644447]  lun0: open backing file: /dev/mmcblk0p1
[   11.653925]  gadget: Mass Storage Function, version: 2009/09/11
[   11.653948]  gadget: Number of LUNs=1
[   11.653970]  lun0: LUN: removable file: /dev/mmcblk0p1
[   11.653982]  gadget: I/O thread pid: 254
[   11.654003]  gadget: adding config #1 'Multifunction with RNDIS'/bf8fe59c
[   11.654088]  gadget: adding 'rndis'/dcc08b40 to config 'Multifunction with RNDIS'/bf8fe59c
[   11.654115] rndis_register: configNr = 0
[   11.654124] rndis_set_param_medium: 0 0
[   11.654136]  gadget: RNDIS: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in
[   11.654150]  gadget: adding 'acm'/dcc08a80 to config 'Multifunction with RNDIS'/bf8fe59c
[   11.654171]  gadget: acm ttyGS0: dual speed IN/ep3in OUT/ep2out NOTIFY/ep4in
[   11.654183]  gadget: adding 'Mass Storage Function'/dcbca640 to config 'Multifunction with RNDIS'/bf8fe59c
[   11.654202]  gadget: cfg 1/bf8fe59c speeds: high full
[   11.654212]  gadget:   interface 0 = rndis/dcc08b40
[   11.654221]  gadget:   interface 1 = rndis/dcc08b40
[   11.654231]  gadget:   interface 2 = acm/dcc08a80
[   11.654240]  gadget:   interface 3 = acm/dcc08a80
[   11.654249]  gadget:   interface 4 = Mass Storage Function/dcbca640
[   11.654264]  gadget: Multifunction Composite Gadget
[   11.654290]  gadget: g_multi ready
[   11.654333] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
[   11.656058] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
[   11.656110] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup
[   11.656183] usb usb2: default language 0x0409
[   11.656219] usb usb2: udev 1, busnum 2, minor = 128
[   11.656232] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   11.656245] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.656257] usb usb2: Product: MUSB HDRC host driver
[   11.656268] usb usb2: Manufacturer: Linux 3.8.11 musb-hcd
[   11.656279] usb usb2: SerialNumber: musb-hdrc.0.auto
[   11.663381] usb usb2: usb_probe_device
[   11.663406] usb usb2: configuration #1 chosen from 1 choice
[   11.663466] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[   11.671549] hub 2-0:1.0: usb_probe_interface
[   11.671571] hub 2-0:1.0: usb_probe_interface - got id
[   11.671596] hub 2-0:1.0: USB hub found
[   11.671638] hub 2-0:1.0: 1 port detected
[   11.671649] hub 2-0:1.0: standalone hub
[   11.671659] hub 2-0:1.0: individual port power switching
[   11.671669] hub 2-0:1.0: no over-current protection
[   11.671679] hub 2-0:1.0: Single TT
[   11.671691] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
[   11.671702] hub 2-0:1.0: power on to power good time: 10ms
[   11.671726] hub 2-0:1.0: local power source is good
[   11.671799] hub 2-0:1.0: enabling power on all ports
[   11.773129] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
[   11.773191] hub 2-0:1.0: hub_suspend
[   11.773220] usb usb2: bus auto-suspend, wakeup 1
[   12.113401] net eth0: initializing cpsw version 1.12 (0)
[   12.115629] net eth0: phy found : id is : 0x7c0f1
[   12.115651] libphy: PHY 4a101000.mdio:01 not found
[   12.120688] net eth0: phy 4a101000.mdio:01 not found on slave 1
[   12.238368] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.773416] usb0: eth_open
[   12.774782] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[   19.732617] cfg80211: Calling CRDA to update world regulatory domain
[   19.732727] cfg80211: World regulatory domain updated:
[   19.732738] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.732750] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.732760] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.732770] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.732780] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.732790] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.336999] rtl8192cu 1-1.1.1:1.0: usb_probe_interface
[   20.337028] rtl8192cu 1-1.1.1:1.0: usb_probe_interface - got id
[   20.349215] rtl8192cu: Chip version 0x10
[   21.333548] rtl8192cu: MAC address: 00:e0:4c:13:c7:1d
[   21.333661] rtl8192cu: Board Type 0
[   21.337941] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[   21.341515] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
[   21.350130] rtlwifi: Firmware rtlwifi/rtl8192cufw.bin not available
[   21.382659] usbcore: registered new interface driver rtl8192cu
[   34.843056] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=0
[  124.819513] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0008
[  124.820097] hub 1-1:1.0: port 3, status 0100, change 0001, 12 Mb/s
[  124.929444] hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
[  125.075491] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0008
[  125.076015] hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s
[  125.185296] hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
[  125.251684] usb 1-1.3: new high-speed USB device number 6 using musb-hdrc
[  125.332292] usb 1-1.3: default language 0x0409
[  125.333261] usb 1-1.3: udev 6, busnum 1, minor = 5
[  125.333276] usb 1-1.3: New USB device found, idVendor=0930, idProduct=6545
[  125.333290] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  125.333302] usb 1-1.3: Product: DataTraveler 2.0
[  125.333312] usb 1-1.3: Manufacturer: Kingston
[  125.333323] usb 1-1.3: SerialNumber: 001D0F0B912B5B880D1508AB
[  125.333854] usb 1-1.3: usb_probe_device
[  125.333872] usb 1-1.3: configuration #1 chosen from 1 choice
[  125.333980] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
[  125.334202] usb-storage 1-1.3:1.0: usb_probe_interface
[  125.334230] usb-storage 1-1.3:1.0: usb_probe_interface - got id
[  125.337664] scsi1 : usb-storage 1-1.3:1.0
[  126.342185] scsi 1:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[  127.140921] sd 1:0:0:0: [sdb] 3966976 512-byte logical blocks: (2.03 GB/1.89 GiB)
[  127.141138] sd 1:0:0:0: [sdb] Write Protect is off
[  127.141155] sd 1:0:0:0: [sdb] Mode Sense: 23 00 00 00
[  127.141354] sd 1:0:0:0: [sdb] No Caching mode page present
[  127.147131] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[  127.155657] sd 1:0:0:0: [sdb] No Caching mode page present
[  127.161438] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[  127.222598]  sdb: sdb1 sdb2
[  127.227472] sd 1:0:0:0: [sdb] No Caching mode page present
[  127.233272] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[  127.239655] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[  179.398446] musb_stage0_irq 790: unhandled DISCONNECT transition (a_idle)
[  212.008340] ------------[ cut here ]------------
[  212.008392] WARNING: at drivers/usb/musb/musb_host.c:125 musb_h_tx_flush_fifo+0x35/0x5c()
[  212.008402] Could not flush host TX2 fifo: csr: 2003
[  212.008410] Modules linked in: rtl8192cu rtlwifi rtl8192c_common mac80211 cfg80211 g_multi libcomposite ip_tables x_tables rfcomm ircomm_tty ircomm irda ipv6 hidp bluetooth rfkill autofs4
[  212.008509] [<c001051d>] (unwind_backtrace+0x1/0x8c) from [<c002b51f>] (warn_slowpath_common+0x33/0x48)
[  212.008527] [<c002b51f>] (warn_slowpath_common+0x33/0x48) from [<c002b581>] (warn_slowpath_fmt+0x1b/0x24)
[  212.008545] [<c002b581>] (warn_slowpath_fmt+0x1b/0x24) from [<c025c73d>] (musb_h_tx_flush_fifo+0x35/0x5c)
[  212.008566] [<c025c73d>] (musb_h_tx_flush_fifo+0x35/0x5c) from [<c025d3bd>] (musb_cleanup_urb+0x25/0x52)
[  212.008584] [<c025d3bd>] (musb_cleanup_urb+0x25/0x52) from [<c025d485>] (musb_urb_dequeue+0x9b/0xb2)
[  212.008611] [<c025d485>] (musb_urb_dequeue+0x9b/0xb2) from [<c024a5c3>] (unlink1+0x7f/0x8c)
[  212.008630] [<c024a5c3>] (unlink1+0x7f/0x8c) from [<c024b279>] (usb_hcd_unlink_urb+0x39/0x74)
[  212.008649] [<c024b279>] (usb_hcd_unlink_urb+0x39/0x74) from [<c0257fab>] (usb_stor_stop_transport+0x1b/0x32)
[  212.008667] [<c0257fab>] (usb_stor_stop_transport+0x1b/0x32) from [<c0257281>] (command_abort+0x49/0x5c)
[  212.008693] [<c0257281>] (command_abort+0x49/0x5c) from [<c02057cd>] (scsi_error_handler+0xe9/0x29c)
[  212.008719] [<c02057cd>] (scsi_error_handler+0xe9/0x29c) from [<c003ca4b>] (kthread+0x61/0x72)
[  212.008744] [<c003ca4b>] (kthread+0x61/0x72) from [<c000c6fd>] (ret_from_fork+0x11/0x34)
[  212.008754] ---[ end trace cf29f63f4db529ee ]---
[  213.008341] ------------[ cut here ]------------
[  213.008385] WARNING: at drivers/usb/musb/musb_host.c:125 musb_h_tx_flush_fifo+0x35/0x5c()
[  213.008396] Could not flush host TX3 fifo: csr: 2003
[  213.008404] Modules linked in: rtl8192cu rtlwifi rtl8192c_common mac80211 cfg80211 g_multi libcomposite ip_tables x_tables rfcomm ircomm_tty ircomm irda ipv6 hidp bluetooth rfkill autofs4
[  213.008497] [<c001051d>] (unwind_backtrace+0x1/0x8c) from [<c002b51f>] (warn_slowpath_common+0x33/0x48)
[  213.008514] [<c002b51f>] (warn_slowpath_common+0x33/0x48) from [<c002b581>] (warn_slowpath_fmt+0x1b/0x24)
[  213.008532] [<c002b581>] (warn_slowpath_fmt+0x1b/0x24) from [<c025c73d>] (musb_h_tx_flush_fifo+0x35/0x5c)
[  213.008552] [<c025c73d>] (musb_h_tx_flush_fifo+0x35/0x5c) from [<c025d3bd>] (musb_cleanup_urb+0x25/0x52)
[  213.008570] [<c025d3bd>] (musb_cleanup_urb+0x25/0x52) from [<c025d485>] (musb_urb_dequeue+0x9b/0xb2)
[  213.008596] [<c025d485>] (musb_urb_dequeue+0x9b/0xb2) from [<c024a5c3>] (unlink1+0x7f/0x8c)
[  213.008615] [<c024a5c3>] (unlink1+0x7f/0x8c) from [<c024b279>] (usb_hcd_unlink_urb+0x39/0x74)
[  213.008634] [<c024b279>] (usb_hcd_unlink_urb+0x39/0x74) from [<c0257fab>] (usb_stor_stop_transport+0x1b/0x32)
[  213.008651] [<c0257fab>] (usb_stor_stop_transport+0x1b/0x32) from [<c0257281>] (command_abort+0x49/0x5c)
[  213.008676] [<c0257281>] (command_abort+0x49/0x5c) from [<c02057cd>] (scsi_error_handler+0xe9/0x29c)
[  213.008701] [<c02057cd>] (scsi_error_handler+0xe9/0x29c) from [<c003ca4b>] (kthread+0x61/0x72)
[  213.008724] [<c003ca4b>] (kthread+0x61/0x72) from [<c000c6fd>] (ret_from_fork+0x11/0x34)
[  213.008734] ---[ end trace cf29f63f4db529ef ]---
[  213.009340] usb 1-1: usb-storage timed out on ep0out len=0/0
[  213.009362] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  213.015047] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  214.015183] usb 1-1: usb-storage timed out on ep0out len=0/0
[  214.015211] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  214.020902] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  215.023020] usb 1-1: usb-storage timed out on ep0out len=0/0
[  215.023044] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  215.028718] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  216.031077] usb 1-1: usb-storage timed out on ep0out len=0/0
[  216.031105] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  216.036804] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  217.038617] usb 1-1: usb-storage timed out on ep0out len=0/0
[  217.038643] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  217.044314] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  217.044327] hub 1-1:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
[  218.052297] usb 1-1: usb-storage timed out on ep0out len=0/0
[  218.052321] hub 1-1:1.0: cannot disable port 2 (err = -110)
[  219.058146] usb 1-1: usb-storage timed out on ep0out len=0/0
[  219.058172] hub 1-1:1.0: cannot reset port 3 (err = -110)
[  219.063853] hub 1-1:1.0: port 3 not enabled, trying reset again...
[  220.066228] usb 1-1: usb-storage timed out on ep0out len=0/0
[  220.066255] hub 1-1:1.0: cannot reset port 3 (err = -110)
[  220.071948] hub 1-1:1.0: port 3 not enabled, trying reset again...
[  221.073768] usb 1-1: usb-storage timed out on ep0out len=0/0
[  221.073794] hub 1-1:1.0: cannot reset port 3 (err = -110)
[  221.079481] hub 1-1:1.0: port 3 not enabled, trying reset again...
[  222.081580] usb 1-1: usb-storage timed out on ep0out len=0/0
[  222.081604] hub 1-1:1.0: cannot reset port 3 (err = -110)
[  222.087276] hub 1-1:1.0: port 3 not enabled, trying reset again...
[  223.087446] usb 1-1: usb-storage timed out on ep0out len=0/0
[  223.087474] hub 1-1:1.0: cannot reset port 3 (err = -110)
[  223.093155] hub 1-1:1.0: port 3 not enabled, trying reset again...
[  223.093168] hub 1-1:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
[  224.101120] usb 1-1: usb-storage timed out on ep0out len=0/0
[  224.101144] hub 1-1:1.0: cannot disable port 3 (err = -110)
[  225.106974] usb 1-1: usb-storage timed out on ep0out len=0/0
[  225.106999] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  225.112680] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  226.114971] usb 1-1: usb-storage timed out on ep0out len=0/0
[  226.114996] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  226.120690] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  227.122596] usb 1-1: usb-storage timed out on ep0out len=0/0
[  227.122623] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  227.128309] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  228.128475] usb 1-1: usb-storage timed out on ep0out len=0/0
[  228.128501] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  228.134190] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  229.136267] usb 1-1: usb-storage timed out on ep0out len=0/0
[  229.136292] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  229.141969] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  229.141982] hub 1-1:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
[  230.149950] usb 1-1: usb-storage timed out on ep0out len=0/0
[  230.149975] hub 1-1:1.0: cannot disable port 2 (err = -110)
[  231.157762] usb 1-1: usb-storage timed out on ep0out len=0/0
[  231.157791] hub 1-1:1.0: cannot reset port 3 (err = -110)
[  231.163483] hub 1-1:1.0: port 3 not enabled, trying reset again...
[  232.165563] usb 1-1: usb-storage timed out on ep0out len=0/0
[  232.165591] hub 1-1:1.0: cannot reset port 3 (err = -110)
[  232.171277] hub 1-1:1.0: port 3 not enabled, trying reset again...
[  233.173375] usb 1-1: usb-storage timed out on ep0out len=0/0
[  233.173401] hub 1-1:1.0: cannot reset port 3 (err = -110)
[  233.179076] hub 1-1:1.0: port 3 not enabled, trying reset again...
[  234.181184] usb 1-1: usb-storage timed out on ep0out len=0/0
[  234.181209] hub 1-1:1.0: cannot reset port 3 (err = -110)
[  234.186887] hub 1-1:1.0: port 3 not enabled, trying reset again...
[  235.189001] usb 1-1: usb-storage timed out on ep0out len=0/0
[  235.189028] hub 1-1:1.0: cannot reset port 3 (err = -110)
[  235.194700] hub 1-1:1.0: port 3 not enabled, trying reset again...
[  235.194713] hub 1-1:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
[  236.202697] usb 1-1: usb-storage timed out on ep0out len=0/0
[  236.202723] hub 1-1:1.0: cannot disable port 3 (err = -110)
[  237.208530] usb 1-1: usb-storage timed out on ep0out len=0/0
[  237.208555] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  237.214243] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  238.216353] usb 1-1: usb-storage timed out on ep0out len=0/0
[  238.216377] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  238.222050] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  239.224202] usb 1-1: usb-storage timed out on ep0out len=0/0
[  239.224231] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  239.229918] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  240.231978] usb 1-1: usb-storage timed out on ep0out len=0/0
[  240.232006] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  240.237697] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  241.239798] usb 1-1: usb-storage timed out on ep0out len=0/0
[  241.239827] hub 1-1:1.0: cannot reset port 2 (err = -110)
[  241.245511] hub 1-1:1.0: port 2 not enabled, trying reset again...
[  241.245523] hub 1-1:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
[  242.253471] usb 1-1: usb-storage timed out on ep0out len=0/0
[  242.253496] hub 1-1:1.0: cannot disable port 2 (err = -110)
[  243.261273] usb 1-1: usb-storage timed out on ep0out len=0/0
[  243.261300] hub 1-1:1.0: cannot reset port 3 (err = -110)
[  243.266985] hub 1-1:1.0: port 3 not enabled, trying reset again...
[  244.267136] usb 1-1: usb-storage timed out on ep0out len=0/0
[  244.267162] hub 1-1:1.0: cannot reset port 3 (err = -110)
[  244.272834] hub 1-1:1.0: port 3 not enabled, trying reset again...
[  245.274937] usb 1-1: usb-storage timed out on ep0out len=0/0
[  245.274964] hub 1-1:1.0: cannot reset port 3 (err = -110)
[  245.280653] hub 1-1:1.0: port 3 not enabled, trying reset again...
[  246.282753] usb 1-1: usb-storage timed out on ep0out len=0/0
[  246.282780] hub 1-1:1.0: cannot reset port 3 (err = -110)
[  246.288469] hub 1-1:1.0: port 3 not enabled, trying reset again...