U-Boot SPL 2018.09-00002-gd5b4c4b656 (Oct 19 2018 - 14:16:02 -0500) Trying to boot from MMC1 Loading Environment from EXT4... ** File not found /boot/uboot.env ** ** Unable to read "/boot/uboot.env" from mmc0:1 ** U-Boot 2018.09-00002-gd5b4c4b656 (Oct 19 2018 - 14:16:02 -0500), Build: jenkins-github_Bootloader-Builder-84 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: Internal. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... ** File not found /boot/uboot.env ** ** Unable to read "/boot/uboot.env" from mmc0:1 ** Model: BeagleBoard.org PocketBeagle not set. Validating first E-fuse MAC Net: usb_ether Press SPACE to abort autoboot in 2 seconds board_name=[A335PBGL] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 2061 bytes read in 36 ms (55.7 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.9.78-ti-r94 ... 9960536 bytes read in 652 ms (14.6 MiB/s) debug: [enable_uboot_overlays=1] ... debug: [enable_uboot_cape_universal=1] ... debug: [uboot_base_dtb_univ=] ... loading /boot/dtbs/4.9.78-ti-r94/am335x-pocketbeagle.dtb ... 132769 bytes read in 55 ms (2.3 MiB/s) uboot_overlays: [fdt_buffer=0x60000] ... loading /boot/initrd.img-4.9.78-ti-r94 ... 6380300 bytes read in 421 ms (14.5 MiB/s) debug: [console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] ... debug: [bootz 0x82000000 0x88080000:615b0c 0x88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8f9ea000, end 8ffffb0c ... OK Loading Device Tree to 8f9c6000, end 8f9e96a0 ... OK Starting kernel ... [ 0.001961] clocksource_probe: no matching clocksources found [ 1.437080] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 1.624989] omap_voltage_late_init: Voltage driver support not added [ 1.632735] PM: Cannot get wkup_m3_ipc handle [ 1.739933] PM: Cannot get wkup_m3_ipc handle [ 2.141168] musb-hdrc musb-hdrc.1: VBUS_ERROR in a_wait_vrise (80, ] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 378.881240] [] (show_stack) from [] (dump_stack+0x80/0x94) [ 378.888554] [] (dump_stack) from [] (panic+0x100/0x28c) [ 378.895603] [] (panic) from [] (complete_and_exit+0x0/0x2c) [ 378.902996] [] (complete_and_exit) from [] (SyS_reboot+0x1c8/0x238) [ 378.911090] [] (SyS_reboot) from [] (ret_fast_syscall+0x0/0x48) [ 378.918851] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 [ 378.918851]