U-Boot SPL 2021.01-gf036fbdc (Aug 11 2023 - 00:55:45 +0000) SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar') SPL initial stack usage: 13384 bytes Trying to boot from MMC1 Loading Environment from MMC... MMC: block number 0x3500 exceeds max(0x2000) *** Warning - !read failed, using default environment init_env from device 9 not supported! Starting ATF on ARM64 core... NOTICE: BL31: v2.9(release):v2.9.0 NOTICE: BL31: Built : 00:55:45, Aug 11 2023 I/TC: I/TC: OP-TEE version: 3.22.0 (gcc version 12.2.0 (Debian 12.2.0-14)) #1 Fri Aug 11 00:55:45 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar') I/TC: HUK Initialized I/TC: Primary CPU switching to normal world boot U-Boot SPL 2021.01-gf036fbdc (Aug 11 2023 - 00:55:45 +0000) SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar') Trying to boot from MMC1 U-Boot 2021.01-gf036fbdc (Aug 11 2023 - 00:55:45 +0000) SoC: AM62X SR1.0 GP Model: BeagleBoard.org BeaglePlay Board: BEAGLEPLAY-A0- rev 02 DRAM: 2 GiB MMC: mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2 Loading Environment from MMC... MMC: block number 0x3500 exceeds max(0x2000) *** Warning - !read failed, using default environment In: serial@2800000 Out: serial@2800000 Err: serial@2800000 Error: Can't set serial# to SSSS Net: Could not get PHY for ethernet@8000000port@1: addr 0 am65_cpsw_nuss_port ethernet@8000000port@1: phy_connect() failed No ethernet found. Press SPACE to abort autoboot in 2 seconds switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 748 bytes read in 7 ms (103.5 KiB/s) BeaglePlay microSD Boot Options 1: BeaglePlay Recovery 2: BeaglePlay disable BCFSERIAL 3: Linux microSD (default) Enter choice: 3: Linux microSD (default) Retrieving file: /Image 29477376 bytes read in 1254 ms (22.4 MiB/s) append: root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet Retrieving file: /k3-am625-beagleplay.dtb 37485 bytes read in 7 ms (5.1 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 000000008fff3000, end 000000008ffff26c ... OK Starting kernel ... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Reserved shared memory is enabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled [ 1.235160] cpu cpu0: cpufreq_init: failed to get clk: -2 [ 1.235232] cpu cpu0: cpufreq_init: failed to get clk: -2 [ 1.235278] cpu cpu0: cpufreq_init: failed to get clk: -2 [ 1.235321] cpu cpu0: cpufreq_init: failed to get clk: -2 [ 1.237252] omap_timer 2400000.timer: IRQ index 0 not found [ 1.397841] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 1.418833] bq32k 0-0068: hctosys: unable to read the hardware clock [ 6.678202] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2 Debian GNU/Linux 12 arm ttyS2 default username:password is [debian:temppwd] arm login: debian Password: [ 16.872830] wl1271_sdio mmc2:0001:2: sdio write failed (-110) The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. debian@arm:~$ [ 26.071821] wl1271_sdio mmc2:0001:2: sdio write failed (-110) [ 35.267841] wl1271_sdio mmc2:0001:2: sdio write failed (-110) [ 35.902668] wlcore: ERROR firmware boot failed despite 3 retries ip a [ 44.488795] wl1271_sdio mmc2:0001:2: sdio write failed (-110) [ 53.683790] wl1271_sdio mmc2:0001:2: sdio write failed (-110) [ 62.879770] wl1271_sdio mmc2:0001:2: sdio write failed (-110) [ 63.514592] wlcore: ERROR firmware boot failed despite 3 retries 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 34:08:e1:84:fa:9f brd ff:ff:ff:ff:ff:ff 3: wlan0: mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether 62:77:f2:ce:dc:a4 brd ff:ff:ff:ff:ff:ff permaddr 6c:30:2a:08:be:4c debian@arm:~$ [ 72.083788] wl1271_sdio mmc2:0001:2: sdio write failed (-110) [ 81.280809] wl1271_sdio mmc2:0001:2: sdio write failed (-110) [ 90.475784] wl1271_sdio mmc2:0001:2: sdio write failed (-110) [ 91.110584] wlcore: ERROR firmware boot failed despite 3 retries [ 99.695786] wl1271_sdio mmc2:0001:2: sdio write failed (-110) [ 108.891794] wl1271_sdio mmc2:0001:2: sdio write failed (-110) [ 118.087796] wl1271_sdio mmc2:0001:2: sdio write failed (-110) [ 118.722492] wlcore: ERROR firmware boot failed despite 3 retries [ 127.291808] wl1271_sdio mmc2:0001:2: sdio write failed (-110)