U-Boot SPL 2021.01-gea96725b (Apr 05 2023 - 22:07:31 +0000) Model: BeagleBoard.org BeagleBone AI-64 R5 Board: BBONEAI-64-B0- rev B0 SYSFW ABI: 3.1 (firmware rev 0x0015 '21.9.1--v2021.09a (Terrific Lla') Trying to boot from MMC2 Starting ATF on ARM64 core... NOTICE: BL31: v2.5(release):577844a NOTICE: BL31: Built : 22:07:31, Apr 5 2023 U-Boot SPL 2021.01-gea96725b (Apr 05 2023 - 22:07:31 +0000) Model: Texas Instruments K3 J721E SoC Board: BBONEAI-64-B0- rev B0 SYSFW ABI: 3.1 (firmware rev 0x0015 '21.9.1--v2021.09a (Terrific Lla') Trying to boot from MMC2 U-Boot 2021.01-gea96725b (Apr 05 2023 - 22:07:31 +0000) SoC: J721E SR1.1 GP Model: Texas Instruments K3 J721E SoC Board: BBONEAI-64-B0- rev B0 DRAM: 4 GiB Flash: 0 Bytes MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment In: serial@2800000 Out: serial@2800000 Err: serial@2800000 am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 Net: eth0: ethernet@46000000port@1 Press SPACE to abort autoboot in 2 seconds board_name=[BBONEAI-64-B0-] ... name_fdt=[k3-j721e-beagleboneai64.dtb] ... i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@22: Error reading output register switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 227 bytes read in 9 ms (24.4 KiB/s) 1: Linux microSD Retrieving file: /initrd.img 15404080 bytes read in 654 ms (22.5 MiB/s) Retrieving file: /Image 29325824 bytes read in 1236 ms (22.6 MiB/s) append: root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 init=/usr/sbin/init-beagle-flasher quiet Retrieving file: /k3-j721e-beagleboneai64.dtb 205872 bytes read in 18 ms (10.9 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8f14f000, end 8ffffc30 ... OK Loading Device Tree to 000000008f119000, end 000000008f14e42f ... OK Starting kernel ... [ 0.704496] debugfs: Directory '31010000.pat' with parent 'regmap' already present! [ 0.704720] debugfs: Directory '31011000.pat' with parent 'regmap' already present! [ 0.704852] debugfs: Directory '31012000.pat' with parent 'regmap' already present! [ 0.704969] debugfs: Directory '31013000.pat' with parent 'regmap' already present! [ 0.705138] debugfs: Directory '31014000.pat' with parent 'regmap' already present! [ 1.238329] am65-cpsw-nuss c000000.ethernet: /bus@100000/ethernet@c000000/ethernet-ports/port@1 error retrieving port phy: -19 [ 2.380421] spi-nor spi11.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff [ 3.143525] debugfs: Directory 'pd:27' with parent 'pm_genpd' already present! [ 3.150780] debugfs: Directory 'pd:26' with parent 'pm_genpd' already present! [ 3.159314] debugfs: Directory 'pd:242' with parent 'pm_genpd' already present! [ 3.166640] debugfs: Directory 'pd:241' with parent 'pm_genpd' already present! [ 3.173953] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present! [ 3.181266] debugfs: Directory 'pd:239' with parent 'pm_genpd' already present! U-Boot SPL 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000) Model: Texas Instruments K3 J721E SoC EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Board: J721EX-PM1-SOM rev E2 SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam') EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Trying to boot from MMC1 init_env from device 17 not supported! Starting ATF on ARM64 core... NOTICE: BL31: v2.5(release):e0d9fdb NOTICE: BL31: Built : 20:08:51, Jan 7 2022 U-Boot SPL 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000) Model: Texas Instruments K3 J721E SoC EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Board: J721EX-PM1-SOM rev E2 SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam') EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Trying to boot from MMC1 U-Boot 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000) SoC: J721E SR2.0 Model: Texas Instruments K3 J721E SoC EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Board: J721EX-PM1-SOM rev E2 DRAM: 4 GiB Flash: 0 Bytes MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1 In: serial@2800000 Out: serial@2800000 Err: serial@2800000 EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Net: am65_cpsw_nuss_slave ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 eth0: ethernet@46000000 Hit any key to stop autoboot: 0 board_name=[J721EX-PM2-SOM] ... name_fdt=[k3-j721e-beagleboneai64.dtb] ... i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@22: Error reading output register switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 227 bytes read in 9 ms (24.4 KiB/s) 1: Linux microSD Retrieving file: /initrd.img 15404080 bytes read in 654 ms (22.5 MiB/s) Retrieving file: /Image 29325824 bytes read in 1236 ms (22.6 MiB/s) append: root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 init=/usr/sbin/init-beagle-flasher quiet Retrieving file: /k3-j721e-beagleboneai64.dtb 205872 bytes read in 18 ms (10.9 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8f14f000, end 8ffffc30 ... OK Loading Device Tree to 000000008f119000, end 000000008f14e42f ... OK Starting kernel ... [ 0.700339] debugfs: Directory '31010000.pat' with parent 'regmap' already present! [ 0.700547] debugfs: Directory '31011000.pat' with parent 'regmap' already present! [ 0.700676] debugfs: Directory '31012000.pat' with parent 'regmap' already present! [ 0.700798] debugfs: Directory '31013000.pat' with parent 'regmap' already present! [ 0.700951] debugfs: Directory '31014000.pat' with parent 'regmap' already present! [ 1.213480] am65-cpsw-nuss c000000.ethernet: /bus@100000/ethernet@c000000/ethernet-ports/port@1 error retrieving port phy: -19 [ 2.353689] spi-nor spi11.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff [ 3.142451] debugfs: Directory 'pd:27' with parent 'pm_genpd' already present! [ 3.149698] debugfs: Directory 'pd:26' with parent 'pm_genpd' already present! [ 3.158187] debugfs: Directory 'pd:242' with parent 'pm_genpd' already present! [ 3.165512] debugfs: Directory 'pd:241' with parent 'pm_genpd' already present! [ 3.172828] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present! [ 3.180133] debugfs: Directory 'pd:239' with parent 'pm_genpd' already present! U-Boot SPL 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000) Model: Texas Instruments K3 J721E SoC EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Board: J721EX-PM1-SOM rev E2 SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam') EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Trying to boot from MMC1 init_env from device 17 not supported! Starting ATF on ARM64 core... NOTICE: BL31: v2.5(release):e0d9fdb NOTICE: BL31: Built : 20:08:51, Jan 7 2022 U-Boot SPL 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000) Model: Texas Instruments K3 J721E SoC EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Board: J721EX-PM1-SOM rev E2 SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam') EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Trying to boot from MMC1 U-Boot 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000) SoC: J721E SR2.0 Model: Texas Instruments K3 J721E SoC EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Board: J721EX-PM1-SOM rev E2 DRAM: 4 GiB Flash: 0 Bytes MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1 In: serial@2800000 Out: serial@2800000 Err: serial@2800000 EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Net: am65_cpsw_nuss_slave ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 eth0: ethernet@46000000 Hit any key to stop autoboot: 0 board_name=[J721EX-PM2-SOM] ... name_fdt=[k3-j721e-beagleboneai64.dtb] ... i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@22: Error reading output register switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 227 bytes read in 8 ms (27.3 KiB/s) 1: Linux microSD Retrieving file: /initrd.img 15404080 bytes read in 654 ms (22.5 MiB/s) Retrieving file: /Image 29325824 bytes read in 1236 ms (22.6 MiB/s) append: root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 init=/usr/sbin/init-beagle-flasher quiet Retrieving file: /k3-j721e-beagleboneai64.dtb 205872 bytes read in 18 ms (10.9 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8f14f000, end 8ffffc30 ... OK Loading Device Tree to 000000008f119000, end 000000008f14e42f ... OK Starting kernel ... [ 0.700734] debugfs: Directory '31010000.pat' with parent 'regmap' already present! [ 0.700938] debugfs: Directory '31011000.pat' with parent 'regmap' already present! [ 0.701069] debugfs: Directory '31012000.pat' with parent 'regmap' already present! [ 0.701188] debugfs: Directory '31013000.pat' with parent 'regmap' already present! [ 0.701334] debugfs: Directory '31014000.pat' with parent 'regmap' already present! [ 1.213782] am65-cpsw-nuss c000000.ethernet: /bus@100000/ethernet@c000000/ethernet-ports/port@1 error retrieving port phy: -19 [ 2.354148] spi-nor spi11.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff [ 3.138665] debugfs: Directory 'pd:27' with parent 'pm_genpd' already present! [ 3.145912] debugfs: Directory 'pd:26' with parent 'pm_genpd' already present! [ 3.154406] debugfs: Directory 'pd:242' with parent 'pm_genpd' already present! [ 3.161723] debugfs: Directory 'pd:241' with parent 'pm_genpd' already present! [ 3.169041] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present! [ 3.176354] debugfs: Directory 'pd:239' with parent 'pm_genpd' already present! U-Boot SPL 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000) Model: Texas Instruments K3 J721E SoC EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Board: J721EX-PM1-SOM rev E2 SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam') EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Trying to boot from MMC1 init_env from device 17 not supported! Starting ATF on ARM64 core... NOTICE: BL31: v2.5(release):e0d9fdb NOTICE: BL31: Built : 20:08:51, Jan 7 2022 U-Boot SPL 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000) Model: Texas Instruments K3 J721E SoC EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Board: J721EX-PM1-SOM rev E2 SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam') EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Trying to boot from MMC1 U-Boot 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000) SoC: J721E SR2.0 Model: Texas Instruments K3 J721E SoC EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Board: J721EX-PM1-SOM rev E2 DRAM: 4 GiB Flash: 0 Bytes MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1 In: serial@2800000 Out: serial@2800000 Err: serial@2800000 EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Net: am65_cpsw_nuss_slave ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 eth0: ethernet@46000000 Hit any key to stop autoboot: 0 board_name=[J721EX-PM2-SOM] ... name_fdt=[k3-j721e-beagleboneai64.dtb] ... i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@22: Error reading output register switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 227 bytes read in 8 ms (27.3 KiB/s) 1: Linux microSD Retrieving file: /initrd.img 15404080 bytes read in 654 ms (22.5 MiB/s) Retrieving file: /Image 29325824 bytes read in 1236 ms (22.6 MiB/s) append: root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 init=/usr/sbin/init-beagle-flasher quiet Retrieving file: /k3-j721e-beagleboneai64.dtb 205872 bytes read in 17 ms (11.5 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8f14f000, end 8ffffc30 ... OK Loading Device Tree to 000000008f119000, end 000000008f14e42f ... OK Starting kernel ... [ 0.700783] debugfs: Directory '31010000.pat' with parent 'regmap' already present! [ 0.701001] debugfs: Directory '31011000.pat' with parent 'regmap' already present! [ 0.701126] debugfs: Directory '31012000.pat' with parent 'regmap' already present! [ 0.701277] debugfs: Directory '31013000.pat' with parent 'regmap' already present! [ 0.701422] debugfs: Directory '31014000.pat' with parent 'regmap' already present! [ 1.218017] am65-cpsw-nuss c000000.ethernet: /bus@100000/ethernet@c000000/ethernet-ports/port@1 error retrieving port phy: -19 [ 2.366109] spi-nor spi11.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff [ 3.139059] debugfs: Directory 'pd:27' with parent 'pm_genpd' already present! [ 3.146307] debugfs: Directory 'pd:26' with parent 'pm_genpd' already present! [ 3.154799] debugfs: Directory 'pd:242' with parent 'pm_genpd' already present! [ 3.162111] debugfs: Directory 'pd:241' with parent 'pm_genpd' already present! [ 3.169431] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present! [ 3.176736] debugfs: Directory 'pd:239' with parent 'pm_genpd' already present! U-Boot SPL 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000) Model: Texas Instruments K3 J721E SoC EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Board: J721EX-PM1-SOM rev E2 SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam') ti_i2c_eeprom_am6_get: Invalid board ID record! EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Trying to boot from MMC1 init_env from device 17 not supported! Starting ATF on ARM64 core... NOTICE: BL31: v2.5(release):e0d9fdb NOTICE: BL31: Built : 20:08:51, Jan 7 2022 U-Boot SPL 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000) Model: Texas Instruments K3 J721E SoC EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Board: J721EX-PM1-SOM rev E2 SYSFW ABI: 3.1 (firmware rev 0x0015 '21.5.0--v2021.05 (Terrific Llam') EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Trying to boot from MMC1 U-Boot 2021.01-g3419da0b (Jan 13 2022 - 15:29:57 +0000) SoC: J721E SR2.0 Model: Texas Instruments K3 J721E SoC EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Board: J721EX-PM1-SOM rev E2 DRAM: 4 GiB Flash: 0 Bytes MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1 In: serial@2800000 Out: serial@2800000 Err: serial@2800000 EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Net: am65_cpsw_nuss_slave ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 eth0: ethernet@46000000 Hit any key to stop autoboot: 0 board_name=[J721EX-PM2-SOM] ... name_fdt=[k3-j721e-beagleboneai64.dtb] ... i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@22: Error reading output register switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 227 bytes read in 8 ms (27.3 KiB/s) 1: Linux microSD Retrieving file: /initrd.img 15404080 bytes read in 654 ms (22.5 MiB/s) Retrieving file: /Image 29325824 bytes read in 1236 ms (22.6 MiB/s) append: root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 init=/usr/sbin/init-beagle-flasher quiet Retrieving file: /k3-j721e-beagleboneai64.dtb 205872 bytes read in 17 ms (11.5 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8f14f000, end 8ffffc30 ... OK Loading Device Tree to 000000008f119000, end 000000008f14e42f ... OK Starting kernel ... [ 0.699474] debugfs: Directory '31010000.pat' with parent 'regmap' already present! [ 0.699678] debugfs: Directory '31011000.pat' with parent 'regmap' already present! [ 0.699802] debugfs: Directory '31012000.pat' with parent 'regmap' already present! [ 0.699943] debugfs: Directory '31013000.pat' with parent 'regmap' already present! [ 0.700085] debugfs: Directory '31014000.pat' with parent 'regmap' already present! [ 1.212845] am65-cpsw-nuss c000000.ethernet: /bus@100000/ethernet@c000000/ethernet-ports/port@1 error retrieving port phy: -19 [ 2.353597] spi-nor spi11.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff