=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2019.02.11 19:44:20 =~=~=~=~=~=~=~=~=~=~=~= U-Boot SPL 2019.04-rc1 (Feb 11 2019 - 13:38:03 +0530) Trying to boot from MMC1 Loading Environment from FAT... *** Warning - bad CRC, using default environment U-Boot 2019.04-rc1 (Feb 11 2019 - 13:38:03 +0530) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... ** No partition table - mmc 0 ** not set. Validating first E-fuse MAC Net: eth0: ethernet@4a100000 Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 , eth1: usb_ether Hit any key to stop autoboot: 2  1  0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Unrecognized filesystem type ** ** Unrecognized filesystem type ** switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... 62765 bytes read in 7 ms (8.6 MiB/s) switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 switch to partitions #0, OK mmc1(part 0) is current device ** No partition table - mmc 1 ** switch to partitions #0, OK mmc1(part 0) is current device SD/MMC found on device 1 ** No partition table - mmc 1 ** ** No partition table - mmc 1 ** ## Error: "bootcmd_nand0" not defined starting USB... USB0: Port not available. ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.missing environment variable: pxeuuid Retrieving file: pxelinux.cfg/01-b0-d5-cc-9f-fd-e6 ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.Retrieving file: pxelinux.cfg/00000000 ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.Retrieving file: pxelinux.cfg/0000000 ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.Retrieving file: pxelinux.cfg/000000 ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.Retrieving file: pxelinux.cfg/00000 ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.Retrieving file: pxelinux.cfg/0000 ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.Retrieving file: pxelinux.cfg/000 ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.Retrieving file: pxelinux.cfg/00 ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.Retrieving file: pxelinux.cfg/0 ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.Retrieving file: pxelinux.cfg/default-arm-am33xx ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.Retrieving file: pxelinux.cfg/default-arm ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.Retrieving file: pxelinux.cfg/default ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.Config file not found starting USB... USB0: Port not available. ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.ethernet@4a100000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is b0:d5:cc:9f:fd:e8 using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC de:ad:be:ef:00:01 HOST MAC de:ad:be:ef:00:00 RNDIS ready The remote end did not respond in time.=> => => printenv arch=arm args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} baudrate=115200 board=am335x board_name=A335BNLT board_rev=00C0 board_serial=3816BBBK05C4 boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr} boot_efi_binary=if fdt addr ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr ${fdtcontroladdr};fi;load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootarm.efi; if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} boot_fdt=try boot_fit=0 boot_net_usb_start=usb start boot_prefixes=/ /boot/ boot_script_dhcp=boot.scr.uimg boot_scripts=boot.scr.uimg boot.scr boot_syslinux_conf=extlinux/extlinux.conf boot_targets=mmc0 legacy_mmc0 mmc1 legacy_mmc1 nand0 pxe dhcp bootcmd=if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd bootcmd_dhcp=run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; if test -z "${fdtfile}" -a -n "${soc}"; then setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; fi; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00010:UNDI:003000;setenv bootp_arch 0xa;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; bootcmd_legacy_mmc0=setenv mmcdev 0; setenv bootpart 0:2 ; run mmcboot bootcmd_legacy_mmc1=setenv mmcdev 1; setenv bootpart 1:2 ; run mmcboot bootcmd_mmc0=setenv devnum 0; run mmc_boot bootcmd_mmc1=setenv devnum 1; run mmc_boot bootcmd_nand=run nandboot bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi bootcount=1 bootdelay=2 bootdir=/boot bootenvfile=uEnv.txt bootfile=zImage bootfstype=fat bootm_size=0x10000000 bootpart=1:2 bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} console=ttyO0,115200n8 cpu=armv7 devnum=1 devplist=1 devtype=mmc dfu_alt_info_emmc=rawemmc raw 0 3751936;boot part 1 1;rootfs part 1 2;MLO fat 1 1;MLO.raw raw 0x100 0x100;u-boot.img.raw raw 0x300 0x1000;u-env.raw raw 0x1300 0x200;spl-os-args.raw raw 0x1500 0x200;spl-os-image.raw raw 0x1700 0x6900;spl-os-args fat 1 1;spl-os-image fat 1 1;u-boot.img fat 1 1;uEnv.txt fat 1 1 dfu_alt_info_mmc=boot part 0 1;rootfs part 0 2;MLO fat 0 1;MLO.raw raw 0x100 0x100;u-boot.img.raw raw 0x300 0x1000;u-env.raw raw 0x1300 0x200;spl-os-args.raw raw 0x1500 0x200;spl-os-image.raw raw 0x1700 0x6900;spl-os-args fat 0 1;spl-os-image fat 0 1;u-boot.img fat 0 1;uEnv.txt fat 0 1 dfu_alt_info_nand=SPL part 0 1;SPL.backup1 part 0 2;SPL.backup2 part 0 3;SPL.backup3 part 0 4;u-boot part 0 5;u-boot-spl-os part 0 6;kernel part 0 8;rootfs part 0 9 dfu_alt_info_ram=kernel ram 0x80200000 0x4000000;fdt ram 0x80f80000 0x80000;ramdisk ram 0x81000000 0x4000000 distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done efi_dtb_prefixes=/ /dtb/ /dtb/current/ envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadbootscript; then run bootscript;else if run loadbootenv; then echo Loaded env from ${bootenvfile};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;fi;fi; eth1addr=b0:d5:cc:9f:fd:e8 ethact=ethernet@4a100000 ethaddr=b0:d5:cc:9f:fd:e6 fdt_addr_r=0x88000000 fdtaddr=0x88000000 fdtcontroladdr=9df2dad8 fdtfile=am335x-boneblack.dtb fileaddr=88000000 filesize=f52d findfdt=if test $board_name = A335BONE; then setenv fdtfile am335x-bone.dtb; fi; if test $board_name = A335BNLT; then setenv fdtfile am335x-boneblack.dtb; fi; if test $board_name = A335PBGL; then setenv fdtfile am335x-pocketbeagle.dtb; fi; if test $board_name = BBBW; then setenv fdtfile am335x-boneblack-wireless.dtb; fi; if test $board_name = BBG1; then setenv fdtfile am335x-bonegreen.dtb; fi; if test $board_name = BBGW; then setenv fdtfile am335x-bonegreen-wireless.dtb; fi; if test $board_name = BBBL; then setenv fdtfile am335x-boneblue.dtb; fi; if test $board_name = BBEN; then setenv fdtfile am335x-sancloud-bbe.dtb; fi; if test $board_name = A33515BB; then setenv fdtfile am335x-evm.dtb; fi; if test $board_name = A335X_SK; then setenv fdtfile am335x-evmsk.dtb; fi; if test $board_name = A335_ICE; then setenv fdtfile am335x-icev2.dtb; fi; if test $fdtfile = undefined; then echo WARNING: Could not determine device tree to use; fi; finduuid=part uuid mmc ${bootpart} uuid fit_bootfile=fitImage fit_loadaddr=0x87000000 importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} init_console=if test $board_name = A335_ICE; then setenv console ttyO3,115200n8;else setenv console ttyO0,115200n8;fi; kernel_addr_r=0x82000000 load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} loadaddr=0x82000000 loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} loadfit=run args_mmc; bootm ${loadaddr}#${fdtfile}; loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile} loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot_part; fi mmcboot=mmc dev ${mmcdev}; setenv devnum ${mmcdev}; setenv devtype mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadimage; then if test ${boot_fit} -eq 1; then run loadfit; else run mmcloados;fi;fi;fi; mmcdev=1 mmcloados=run args_mmc; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; mmcrootfstype=ext4 rootwait mtdids=nand0=nand.0 mtdparts=mtdparts=nand.0:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system) nandargs=setenv bootargs console=${console} ${optargs} root=${nandroot} rootfstype=${nandrootfstype} nandboot=echo Booting from nand ...; run nandargs; nand read ${fdtaddr} NAND.u-boot-spl-os; nand read ${loadaddr} NAND.kernel; bootz ${loadaddr} - ${fdtaddr} nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048 nandrootfstype=ubifs rootwait=1 netargs=setenv bootargs console=${console} ${optargs} root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp netboot=echo Booting from network ...; setenv autoload no; dhcp; run netloadimage; run netloadfdt; run netargs; bootz ${loadaddr} - ${fdtaddr} netloadfdt=tftp ${fdtaddr} ${fdtfile} netloadimage=tftp ${loadaddr} ${bootfile} nfsopts=nolock partitions=uuid_disk=${uuid_gpt_disk};name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs} pxefile_addr_r=0x80100000 ramargs=setenv bootargs console=${console} ${optargs} root=${ramroot} rootfstype=${ramrootfstype} ramboot=echo Booting from ramdisk ...; run ramargs; bootz ${loadaddr} ${rdaddr} ${fdtaddr} ramdisk_addr_r=0x88080000 ramroot=/dev/ram0 rw ramrootfstype=ext2 rdaddr=0x88080000 rootpath=/export/rootfs scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; if test -z "${fdtfile}" -a -n "${soc}"; then setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; fi; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootarm.efi; then echo Found EFI removable media binary efi/boot/bootarm.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done scriptaddr=0x80000000 serial#=3816BBBK05C4 soc=am33xx spiargs=setenv bootargs console=${console} ${optargs} root=${spiroot} rootfstype=${spirootfstype} spiboot=echo Booting from spi ...; run spiargs; sf probe ${spibusno}:0; sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; bootz ${loadaddr} spibusno=0 spiimgsize=0x362000 spiroot=/dev/mtdblock4 rw spirootfstype=jffs2 spisrcaddr=0xe0000 static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off stderr=serial@44e09000 stdin=serial@44e09000 stdout=serial@44e09000 update_to_fit=setenv loadaddr ${fit_loadaddr}; setenv bootfile ${fit_bootfile} usb_boot=usb start; if usb dev ${devnum}; then setenv devtype usb; run scan_dev_for_boot_part; fi usbnet_devaddr=de:ad:be:ef:00:01 vendor=ti ver=U-Boot 2019.04-rc1 (Feb 11 2019 - 13:38:03 +0530) Environment size: 9918/131068 bytes =>