U-Boot SPL 2015.10 (Sep 13 2024 - 17:17:45)
board is known
Timed out in wait_for_event: status=0000
Check if pads/pull-ups of bus 0 are properly configured
probe error tps
bad magic


U-Boot 2015.10 (Sep 13 2024 - 17:17:45 +0200)

       Watchdog enabled
I2C:   ready
DRAM:  512 MiB
Reset Source: Power-on reset has occurred.
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment

setting gpio1_3 : gpio 35
board_fdt:_▒▒▒▒▒
Net:
 mac:  05c1ef49e20
<ethaddr> not set. Validating first E-fuse MAC
<ethaddr> mac to set is valid
debug ti cpsw
cpsw
Hit any key to stop autoboot:  0
select fdt _▒▒▒▒▒.dtb
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** File not found ${script} **
1175 bytes read in 12 ms (94.7 KiB/s)
Loaded environment from uEnv.txt
Importing environment from mmc ...
Running uenvcmd ...
548 bytes read in 68 ms (7.8 KiB/s)
debug1: [/boot/vmlinuz-4.4.13-bone11] ...
7577952 bytes read in 1066 ms (6.8 MiB/s)
debug3: [/boot/initrd.img-4.4.13-bone11] ...
** File not found /boot/initrd.img-4.4.13-bone11 **
debug2: [/boot/dtbs/4.4.13-bone11/am335x-boneblack.dtb] ...
58677 bytes read in 93 ms (615.2 KiB/s)
debug: [console=tty1,115200n8 root=/dev/mmcblk0p1 rootfstype=ext4 rootwait coherent_pool=1M quiet splash video=HDMI-A-1:1024x600MR@60e fbcon=rotate:3 usbcore.authorized_default=0 fsck.mode=auto fsck.repair=yes ima_audit=1 ima_tcb] ...
debug: [bootz 0x82000000 0x88080000:73a160 0x88000000] ...
Kernel image @ 0x82000000 [ 0x000000 - 0x73a160 ]
data abort
pc : [<9ff7089c>]          lr : [<9ff708f5>]
reloc pc : [<8080e89c>]    lr : [<8080e8f5>]
sp : 9ef41898  ip : 00000000     fp : 9ef4a41c
r10: 00000003  r9 : 9ef41ed8     r8 : 00000002
r7 : 9ffa4ed4  r6 : 9ffa4ed8     r5 : 00000003  r4 : 9ffa4e3c
r3 : 00000000  r2 : 9ffa4e3c     r1 : 9ef4a41c  r0 : 00000000
Flags: nZcv  IRQs off  FIQs on  Mode SVC_32
Resetting CPU ...