U-Boot SPL 2021.01-gf65a2b8f (Aug 10 2022 - 16:53:51 +0000) Model: Texas Instruments K3 J721E SoC Board: BBONEAI-64-B0- rev B0 SYSFW ABI: 3.1 (firmware rev 0x0015 '21.9.1--v2021.09a (Terrific Lla') TLB table from ffffc000 to 00000000 >>SPL: board_init_r() spl_init Trying to boot from MMC1 spl: mmc boot mode: fs board_fit_image_post_process: processing image: addr=70000000, size=39864, os=arm-trusted-firmware board_fit_image_post_process: matched image for ID 0 board_fit_image_post_process: processing image: addr=9e800000, size=374648, os=tee board_fit_image_post_process: matched image for ID 1 board_fit_image_post_process: processing image: addr=89000000, size=217356, os=DM board_fit_image_post_process: matched image for ID 3 board_fit_image_post_process: processing image: addr=80080000, size=163192, os=U-Boot board_fit_image_post_process: matched image for ID 2 board_fit_image_post_process: processing image: addr=ffffffff, size=10103, os= Unsupported OS image.. Jumping nevertheless.. loaded - jumping to U-Boot... init_env from device 17 not supported! jump_to_image_no_args: jumping to address 41010000 Starting ATF on ARM64 core... NOTICE: BL31: v2.5(release):0588523 NOTICE: BL31: Built : 16:53:51, Aug 10 2022 U-Boot SPL 2021.01-gf65a2b8f (Aug 10 2022 - 16:53:51 +0000) Model: Texas Instruments K3 J721E SoC Board: BBONEAI-64-B0- rev B0 SYSFW ABI: 3.1 (firmware rev 0x0015 '21.9.1--v2021.09a (Terrific Lla') TLB table from ffff4000 to 100000000 SPL malloc() before relocation used 0x2500 bytes (9 KB) >>SPL: board_init_r() spl_init Trying to boot from MMC1 spl: mmc boot mode: fs Jumping to U-Boot loaded - jumping to U-Boot... image entry point: 0x80800000 U-Boot 2021.01-gf65a2b8f (Aug 10 2022 - 16:53:51 +0000) SoC: J721E SR2.0 Model: Texas Instruments K3 J721E SoC Board: BBONEAI-64-B0- rev B0 DRAM: 4 GiB Flash: 0 Bytes MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment In: serial@2800000 Out: serial@2800000 Err: serial@2800000 Net: am65_cpsw_nuss_slave ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 eth0: ethernet@46000000 Press SPACE to abort autoboot in 2 seconds board_name=[BBONEAI-64-B0-] ... name_fdt=[k3-j721e-beagleboneai64.dtb] ... i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@22: Error reading output register switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 987 bytes read in 9 ms (106.4 KiB/s) BeagleBone AI-64 (xfox) 1: failsafe 2: xfox Enter choice: 2: xfox Retrieving file: /Image 41988608 bytes read in 1803 ms (22.2 MiB/s) append: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=/dev/mmcblk1p3 rw rootfstype=ext4 rootwait net.ifnames=0 Retrieving file: /k3-j721e-beagleboneai64.dtb Failed to load '/k3-j721e-beagleboneai64.dtb' Skipping xfox for failure retrieving fdt 1: failsafe Retrieving file: /Image 41988608 bytes read in 1804 ms (22.2 MiB/s) append: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=/dev/mmcblk1p3 rw rootfstype=ext4 rootwait net.ifnames=0 Retrieving file: /k3-j721e-beagleboneai64.dtb Failed to load '/k3-j721e-beagleboneai64.dtb' Skipping failsafe for failure retrieving fdt SCRIPT FAILED: continuing... libfdt fdt_check_header(): FDT_ERR_BADMAGIC Scanning disk sdhci@4f80000.blk... Scanning disk sdhci@4fb0000.blk... ** Unrecognized filesystem type ** Found 7 disks No EFI system partition BootOrder not defined EFI boot manager: Cannot load any image switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 209 bytes read in 11 ms (18.6 KiB/s) 1: Linux eMMC Retrieving file: /initrd.img 15775789 bytes read in 95 ms (158.4 MiB/s) Retrieving file: /Image 28813824 bytes read in 2417 ms (11.4 MiB/s) append: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet Retrieving file: /k3-j721e-beagleboneai64.dtb 203817 bytes read in 43 ms (4.5 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8f0f4000, end 8ffff82d ... OK Loading Device Tree to 000000008f0bf000, end 000000008f0f3c28 ... OK Linux kernel Image start = 0x82000000 end = 0x83c40000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] [ 0.000000] Linux version 5.10.120-ti-arm64-r63 (voodoo@rpi4b8g-19) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1bullseye SMP Fri Sep 2 01:18:17 UTC 2022 [ 0.000000] Machine model: BeagleBoard.org BeagleBone AI-64 [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.710100] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [ 0.716389] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [ 0.907056] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [ 0.913388] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [ 1.212549] davinci_mdio c000f00.mdio: timed out waiting for user access [ 1.319347] davinci_mdio c000f00.mdio: timed out waiting for idle [ 2.461804] spi-nor spi1.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff [ 2.656610] davinci_mdio c000f00.mdio: timed out waiting for user access [ 2.763411] davinci_mdio c000f00.mdio: timed out waiting for idle [ 2.771214] am65-cpsw-nuss c000000.ethernet: /bus@100000/ethernet@c000000/ethernet-ports/port@1 error retrieving port phy: -19 [ 3.492343] debugfs: Directory 'pd:27' with parent 'pm_genpd' already present! [ 3.499586] debugfs: Directory 'pd:26' with parent 'pm_genpd' already present! [ 3.508035] debugfs: Directory 'pd:242' with parent 'pm_genpd' already present! [ 3.515363] debugfs: Directory 'pd:241' with parent 'pm_genpd' already present! [ 3.522668] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present! [ 3.529987] debugfs: Directory 'pd:239' with parent 'pm_genpd' already present! rootfs: recovering journal rootfs: clean, 111575/950272 files, 2300994/3794688 blocks [ 11.752708] img_enc 4200000.video-encoder: vxe_enc_probe: using heap 1 for internal alloc [ 11.839784] k3-dsp-rproc 4d80800000.dsp: configured DSP for remoteproc mode [ 11.850160] ov5640 4-003c: ov5640_read_reg: error: reg=300a [ 11.855734] ov5640 4-003c: ov5640_check_chip_id: failed to read chip identifier [ 11.909242] remoteproc remoteproc12: request_firmware failed: -2 [ 11.922518] k3-dsp-rproc 4d81800000.dsp: configured DSP for remoteproc mode [ 12.051127] remoteproc remoteproc13: request_firmware failed: -2 [ 12.067268] k3-dsp-rproc 64800000.dsp: configured DSP for remoteproc mode [ 12.074729] remoteproc remoteproc14: request_firmware failed: -2 [ 12.144535] ov5640 6-003c: ov5640_read_reg: error: reg=300a [ 12.150184] ov5640 6-003c: ov5640_check_chip_id: failed to read chip identifier [ 12.543773] platform 41000000.r5f: configured R5F for IPC-only mode [ 12.550964] platform 41000000.r5f: R5F core initialized in IPC-only mode [ 12.575406] platform 5c00000.r5f: configured R5F for remoteproc mode [ 12.590027] remoteproc remoteproc16: request_firmware failed: -2 [ 12.602829] platform 5d00000.r5f: configured R5F for remoteproc mode [ 12.614014] remoteproc remoteproc17: request_firmware failed: -2 [ 12.622338] platform 5e00000.r5f: configured R5F for remoteproc mode [ OK ] Finished Tell Plymouth To Write Out Runtime Data. [ 12.675362] remoteproc remoteproc18: request_firmware failed: -2 [ 12.678578] platform 5f00000.r5f: configured R5F for remoteproc mode [ 12.724010] remoteproc remoteproc19: request_firmware failed: -2 [ OK ] Finished Create Volatile Files and Directories. Starting Network Name Resolution... Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Raise network interfaces. [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Avahi mDNS/DNS-SD Stack... Starting BeagleBoard Generate Symlinks... Starting BeagleBoard.org USB gadgets... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting dphys-swapfile - …unt, and delete a swap file... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Initialize hardware monitoring sensors... Starting System Logging Service... Starting User Login Management... Starting LSB: Start daemon at boot time... Starting Disk Manager... Starting WPA supplicant... [ OK ] Finished Initialize hardware monitoring sensors. [ OK ] Finished BeagleBoard Generate Symlinks. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. [ OK ] Started System Logging Service. [ OK ] Found device /dev/ttyGS0. [ OK ] Started LSB: Start daemon at boot time. [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Finished dphys-swapfile - …mount, and delete a swap file. [ OK ] Started User Login Management. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started WPA supplicant. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. Starting LSB: disk temperature monitoring daemon... Starting A high performanc… and a reverse proxy server... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started LSB: disk temperature monitoring daemon. [ OK ] Finished Permit User Sessions. Starting Light Display Manager... Starting Hold until boot process finishes up...