U-Boot SPL 2017.03-00002-gd12b1519b4 (Mar 14 2017 - 10:28:26) Trying to boot from MMC2 U-Boot 2017.03-00002-gd12b1519b4 (Mar 14 2017 - 10:28:26 -0500), Build: jenkins-github_Bootloader-Builder-532 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB Reset Source: Global external warm reset has occurred. Reset Source: Global warm SW reset has occurred. Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment not set. Validating first E-fuse MAC BeagleBone Black: Model: BeagleBoard.org BeagleBone Black Wireless: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE Could not get PHY for cpsw: addr 0 cpsw Press SPACE to abort autoboot in 2 seconds board_name=[BBBW] ... Card did not respond to voltage select! mmc_init: -95, time 13 Card did not respond to voltage select! mmc_init: -95, time 13 Card did not respond to voltage select! mmc_init: -95, time 13 gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 Card did not respond to voltage select! mmc_init: -95, time 12 Card did not respond to voltage select! mmc_init: -95, time 13 switch to partitions #0, OK mmc1(part 0) is current device Scanning mmc 1:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc1(part 0) is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 2207 bytes read in 21 ms (102.5 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.4.68-ti-r110 ... 8806088 bytes read in 578 ms (14.5 MiB/s) loading /boot/dtbs/4.4.68-ti-r110/am335x-boneblack-wireless.dtb ... 59486 bytes read in 49 ms (1.2 MiB/s) uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to enable... loading /boot/initrd.img-4.4.68-ti-r110 ... 5300197 bytes read in 351 ms (14.4 MiB/s) debug: [console=ttyO0,115200n8 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet cape_universal=enable] ... debug: [bootz 0x82000000 0x88080000:50dfe5 0x88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8faf2000, end 8fffffe5 ... OK Loading Device Tree to 8fae0000, end 8faf185d ... OK Starting kernel ... [ 0.001091] clocksource_probe: no matching clocksources found [ 2.081500] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 2.319951] omap_voltage_late_init: Voltage driver support not added [ 2.327953] PM: Cannot get wkup_m3_ipc handle Loading, please wait... [ 4.834014] remoteproc1: failed to load am335x-pru0-fw [ 4.875999] remoteproc1: request_firmware failed: -2 [ 4.881207] pru-rproc 4a334000.pru0: rproc_boot failed [ 4.975916] remoteproc1: failed to load am335x-pru1-fw [ 4.985641] remoteproc1: request_firmware failed: -2 [ 4.990874] pru-rproc 4a338000.pru1: rproc_boot failed rootfs: recovering journal rootfs: clean, 79877/233392 files, 478182/932864 blocks Debian GNU/Linux 8 beaglebone ttyS0 BeagleBoard.org Debian Image 2017-03-19 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] beaglebone login: [ 40.738802] Error: Driver 'ecap' is already registered, aborting... Debian GNU/Linux 8 beaglebone ttyS0 BeagleBoard.org Debian Image 2017-03-19 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] beaglebone login: Debian GNU/Linux 8 beaglebone ttyS0 BeagleBoard.org Debian Image 2017-03-19 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd]