=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2024.08.20 11:03:14 =~=~=~=~=~=~=~=~=~=~=~= U-Boot SPL 2024.07-rc5-00001-gc53b3444 (Jun 25 2024 - 20:52:00 +0000) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.8--v09.02.08 (Kool Koala)') Changed A53 CPU frequency to 1250000000Hz (T grade) in DT SPL initial stack usage: 13400 bytes Trying to boot from MMC2 Starting ATF on ARM64 core... NOTICE: BL31: v2.11.0(release):d1c75f1 NOTICE: BL31: Built : 20:52:00, Jun 25 2024 I/TC: I/TC: OP-TEE version: 4.2.0 (gcc version 12.2.0 (Debian 12.2.0-14)) #1 Tue Jun 25 20:52:00 UTC 2024 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: GIC redistributor base address not provided I/TC: Assuming default GIC group status and modifier I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.8--v09.02.08 (Kool Koala)') I/TC: HUK Initialized I/TC: Primary CPU switching to normal world boot U-Boot SPL 2024.07-rc5-00001-gc53b3444 (Jun 25 2024 - 20:52:00 +0000) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.8--v09.02.08 (Kool Koala)') SPL initial stack usage: 1760 bytes Trying to boot from MMC2 U-Boot 2024.07-rc5-00001-gc53b3444 (Jun 25 2024 - 20:52:00 +0000) SoC: AM62X SR1.0 GP Model: BeagleBoard.org BeaglePlay DRAM: 2 GiB Core: 99 devices, 28 uclasses, devicetree: separate MMC: mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2 Loading Environment from nowhere... OK In: serial@2800000 Out: serial@2800000 Err: serial@2800000 Net: am65_cpsw_nuss_port ethernet@8000000port@1: phy_connect() failed am65_cpsw_nuss_port ethernet@8000000port@2: phy_connect() failed No ethernet found. Press SPACE to abort autoboot in 2 seconds switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 Failed to load 'uEnv.txt' Scanning for bootflows in all bootdevs Seq Method State Uclass Part Name Filename --- ----------- ------ -------- ---- ------------------------ ---------------- Scanning bootdev 'mmc@fa00000.bootdev': 0 extlinux ready mmc 1 mmc@fa00000.bootdev.part_ /extlinux/extlinux.conf ** Booting bootflow 'mmc@fa00000.bootdev.part_1' with extlinux BeaglePlay microSD (extlinux.conf) (swap enabled) 1: microSD disable BCFSERIAL 2: copy microSD to eMMC 3: microSD (debug) 4: microSD (default) Enter choice: 4: microSD (default) Retrieving file: /Image Retrieving file: /initrd.img append: root=/dev/mmcblk1p3 ro rootfstype=ext4 resume=/dev/mmcblk1p2 rootwait net.ifnames=0 quiet Retrieving file: /ti/k3-am625-beagleplay.dtb ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 Loading Ramdisk to 8e999000, end 8ffff451 ... OK Loading Device Tree to 000000008e987000, end 000000008e998c3d ... OK Working FDT set to 8e987000 Starting kernel ... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Reserved shared memory is enabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled [ 0.143016] omap-mailbox 29000000.mailbox: no available mbox devices found [ 2.346210] tps65219 0-0030: Failed to read device ID: -121 [ 2.389630] OF: graph: no port node found in /bus@f0000/dss@30200000/oldi-txes/oldi@0/ports [ 2.398138] OF: graph: no port node found in /bus@f0000/dss@30200000/oldi-txes/oldi@1/ports [ 2.480151] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [ 2.529931] mikrobus mikrobus-0: failed to get w1_bus_master [ 2.538281] bq32k 0-0068: hctosys: unable to read the hardware clock [ 2.546329] OF: graph: no port node found in /bus@f0000/dss@30200000/oldi-txes/oldi@0/ports [ 2.554754] OF: graph: no port node found in /bus@f0000/dss@30200000/oldi-txes/oldi@1/ports [ 2.771881] OF: graph: no port node found in /bus@f0000/dss@30200000/oldi-txes/oldi@0/ports [ 2.780307] OF: graph: no port node found in /bus@f0000/dss@30200000/oldi-txes/oldi@1/ports [ 2.791237] OF: graph: no port node found in /bus@f0000/dss@30200000/oldi-txes/oldi@0/ports [ 2.799654] OF: graph: no port node found in /bus@f0000/dss@30200000/oldi-txes/oldi@1/ports [ 2.814515] OF: graph: no port node found in /bus@f0000/dss@30200000/oldi-txes/oldi@0/ports [ 2.822917] OF: graph: no port node found in /bus@f0000/dss@30200000/oldi-txes/oldi@1/ports [-1;-1f[ 13.023199] OF: graph: no port node found in /bus@f0000/dss@30200000/oldi-txes/oldi@0/ports [ 13.031666] OF: graph: no port node found in /bus@f0000/dss@30200000/oldi-txes/oldi@1/ports Gave up waiting for suspend/resume device Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/mmcblk1p3 does not exist. Dropping to a shell! (initramfs)