http://beagleboard.org/getting-started#update
This page is missing a step:
/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
It appears this command is no longer in /uEnv.txt
I'm guessing you could edit that file and add it back before you load the sd card?
##enable BBB: eMMC Flasher:
cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
(taken from http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Flashing_eMMC)
I'm using this image:
https://debian.beagleboard.org/images/bone-debian-8.6-lxqt-4gb-armhf-2016-11-06-4gb.img.xz
Getting Started - BeagleBoard | How do I start using my board?
This page is missing a step:
/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
It appears this command is no longer in /uEnv.txt
"/boot/uEnv.txt"
I'm guessing you could edit that file and add it back before you load the sd
card?##enable BBB: eMMC Flasher:
cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh(taken from
Beagleboard:BeagleBoneBlack Debian - eLinux.org)I'm using this image:
https://debian.beagleboard.org/images/bone-debian-8.6-lxqt-4gb-armhf-2016-11-06-4gb.img.xz
Regards,