[beagleboard] After "bitbake task-base"

Okay I have several images in the /stuff/build/tmp/deploy/glibc/images/om-gta01… the documentation online describes how to put prebuilt images onto an SD card, but not the mapping of these custom built images to the files on the SD card… is there some documentation on how to build an SD card with these images to boot them on the beagleboard?

Angstrom-base-image-glibc-ipk-2010.4-test-20100415-om-gta01.rootfs.jffs2

Angstrom-base-image-glibc-ipk-2010.4-test-20100415-om-gta01.rootfs.tar

Angstrom-base-image-glibc-ipk-2010.4-test-20100415-om-gta01.rootfs.tar.gz

Angstrom-base-image-glibc-ipk-2010.4-test-20100415-om-gta01.rootfs.ubi

Angstrom-base-image-glibc-ipk-2010.4-test-20100415-om-gta01.rootfs.ubifs

Angstrom-base-image-glibc-ipk-2010.4-test-20100415-om-gta01-testlab

base-image-om-gta01.jffs2 → Angstrom-base-image-glibc-ipk-2010.4-test-20100415-om-gta01.rootfs.jffs2

base-image-om-gta01.tar → Angstrom-base-image-glibc-ipk-2010.4-test-20100415-om-gta01.rootfs.tar

base-image-om-gta01.tar.gz → Angstrom-base-image-glibc-ipk-2010.4-test-20100415-om-gta01.rootfs.tar.gz

base-image-om-gta01.ubi → Angstrom-base-image-glibc-ipk-2010.4-test-20100415-om-gta01.rootfs.ubi

modules-2.6.24-oe5+gitrfb42ce6724576fc173faf8abfb04aa2c36d213b7-r1-om-gta01.tgz

ubinize.cfg

uImage-2.6.24-oe5+gitrfb42ce6724576fc173faf8abfb04aa2c36d213b7-r1-om-gta01.bin

I don't think files built from an openmoko phone will run well on the beagle, I know for sure the kernel won't work.

regards,

Koen

Koen,
Thanks for the pointer, I am building it again with
MACHINE="beagleboard".
Kyle

beagleboard+unsubscribe@googlegroups.com