[beagleboard] Latest Demo Angstrom Images with older BeagleBoards

GoogleGroups
1

Hello All,

I just wanted to know if the MLO and u-boot available at the link
below can be used with the C3 (or older) BeagleBoards.

http://www.angstrom-distribution.org/demo/beagleboard/

I tried them on my C3 beagle but was unable to get u-boot to load but
using the old MLO and u-boot I was able to get through u-boot but get
a kernel panic and the system halts.

Thanks for your help.

Regards,
Akshat

2

Works fine on my C2 Beagle. Don't forget to flash the new MLO & u-boot
into the Beagle's NAND so that it boots w/o holding the USER button.

Eric